F50F
ELECTROSTATIC
AIR CLEANER
PRODUCT DATA
FEATURES
• Available in two sizes to suit most standard duct
sizes
• Adaptable to suit airflow from either side
• One or two electrostatic cells depending on cabinet
size
• Pressure drop approximately equal to that of an
average fibreglass filter
• Neon indicator light tells if the Air Cleaner is powered
and if high voltage is present
DESCRIPTION
The high efficiency F50F Electronic Air Cleaner is mounted in
the return air duct of a forced air heating, cooling or
ventilation system. It removes airborne particles such as
dust, soot, pollen, tobacco smoke and cooking smoke from
the air circulated through it. Both models have an internal air
flow switch to operate the F50F when the blower is on.
Each model features a solid state power pack which is self
regulating and maintains peak efficiency over a wide range of
cell dirt loading conditions.
The product's electrostatic cells can be easily removed for
cleaning using water and detergent.
• Performance jumper allows operation with reduced
ozone production
• Solid state self regulating power pack
• Test button checks system operation
• High efficiency, commercial grade collecting cells
provide excellent dirt holding capacity
• Approvals - meets all relevant EU directives
EN0R 8478 R1
F50F ELECTROSTATIC AIR CLEANER
SPECIFICATIONS
Supply voltage : 230 V~, 50Hz
Power
consumption
Ioniser voltage : 8150 Vdc
Collector voltage : 4075 Vdc
Efficiency : See page 3
Temperature
rating
Weight
Model Weight kg
F50F1008 Shipping Weight 17.2
Installed Weight 15.0
F50F1024 Shipping Weight 11.3
Installed Weight 9.5
Approvals : Meets all relevant EU Directives
: Single cell - 22 W maximum
Dual cell - 36 W maximum
: Shipping and storage; -20°C to 50°C
Operating; 5 to 50°C (airflow through
cell)
FUNDAMENTALS
Two-stage Precipitation
Honeywell Electrostatic Air Cleaners employ two-stage
electrostatic precipitation to remove contaminants from the
air in office buildings and commercial premises.
Polluted air is cleaned as it passes through the electrostatic
cell. Firstly a high voltage is applied to the stream of air in
the ionising stage. This charges the dirt particles which are
then attracted onto oppositely charged plates in the collecting
stage, similar to the way in which iron filings are attracted to
a magnet.
The cleaned air is then ducted back into the room or living
space.
After a period of time the cell can be removed and the
collected dirt washed off with water and detergent.
DIMENSIONS
Model Dim.A Dim.B Dim.C Dim.D Dim.E
F50F1008 475 515 600 650 70
F50F1024 475 513 282 333 92
Two-stage electrostatic precipitation
APPLICATION
The F50F range of Electrostatic Air Cleaners is designed for
use in forced air heating, cooling and ventilating systems in
offices, bars, restaurants and other commercial and public
buildings.
The Air Cleaner should be mounted in the return air duct
close to the fan so that it can help keep the fan motor and
evaporator coils clean thus reducing maintenance.
All dimensions in millimetres
EN0R 8478 R1 2
A
INSTALLATION AND LOCATION
Note
1. For most efficient air cleaning, air flow must be
spread evenly across the face of the air cleaner.
2. Do not mount in the discharge air duct.
F50F ELECTROSTATIC AIR CLEANER
Turning Vanes
If the Air Cleaner is installed close to an elbow or angle
fitting, install turning vanes inside the angle to distribute
airflow more evenly across the face of the cell.
Determine Duct Design Requirements
The Air Cleaner is adaptable to all new and existing forced air
heating, cooling and ventilating systems used in commercial
buildings. Transitions, turning vanes, or offsets may be
needed in some applications for effective operation.
Choose a location that is readily accessible for regular
inspection and cleaning. Allow at least 330 mm in front of the
access door for removing the prefilter and electronic cell.
Allow enough room above the power supply so it can be
serviced without removing pipes, ducts, or other heating
system components.
The Air Cleaner must be installed where the air temperature
will not exceed 50°C.
Transitions
If the duct and the air cleaner cabinet are different in size,
transitions are recommended. Gradual transitions reduce air
turbulence and increase efficiency.
Recommend no more than 20°
expansion per side (100 mm per
300 linear mm)
RETURN AIR
DUCT
TURNING VANES
TRANSITION
ELECTRONIC AIR CLEANER
RETURN AIR
DUCT
Installing the Air Cleaner in a duct requiring a right angle bend
RETURN
DUCT
TURNING
VANES
FURNACE
TRANSITION FITTING
ELECTRONIC AIR
CLEANER CABINET
Installing the Air Cleaner on the side of a furnace
CAPACITY, EFFICIENCY AND PRESSURE DROP
Efficiency of cells is based on ASHRAE
Standard 52.1-92, Atmospheric Dust
Spot efficiency.
This test gives the most accurate
comparison of high efficiency filtration
for sub-micron particles.
Efficiency
%
ELECTRONIC AIR CLEANER
Pressure
Drop Pa
IR FLOW m3/hr
EN0R 8478 R1 3
F50F ELECTROSTATIC AIR CLEANER
WIRING
To
W8600E
Wall Panel
(Optional)
ON/OFF
Switch
Interlock
Switch
Performance Jumper
Power
Pack
Models featuring 2
Electrostatic Collecting
Cells
Air Flow
Switch Board
Resistor for W8600E wash indication threshold
Air flow switch disable jumper
ORDERING SPECIFICATION
Model Cells To Fit Standard Duct (mm) Maximum Airflow (m3/h)
F50F1008 2 600 x 450 3400
F50F1024 1 250 x 450 1700
Honeywell Control Systems Limited
Newhouse Industrial Estate
Motherwell ML1 5SB
United Kingdom
EN0R 8478 R1
Helping You Control Your World
Loading...