Honeywell DT640STC, DT660STC, DT6100STC, DT6360STC, DT7550C Brochure & Specs

...

Download

HONEYWELL SECURITY & CUSTOM ELECTRONICS

Honeywell provides a sensor line that’s unsurpassed

for quality, design and performance. Our field-proven,

installation-friendly products, including PIRs, magnetic

contacts, DUAL TECs

and FlexGuard®, the world's

best-selling line of glassbreak detectors, extend the

boundaries of sensor design and are rigorously

challenged in test rooms built to exceed the toughest

SIA standards.

THIS SECTION INCLUDES:

Sensors

Motion Detectors

DUAL TEC

PIRs

Accessories

V-Plex

Access Control Sensors

Environmental Sensors

Photoelectric Beams

Glassbreak Detectors

Indoor Sounders

Sounding Devices

Siren Drivers, Bells, and Boxes

Surface Mount Contacts

Recess Mount Contacts

Commercial Contacts

Hold-Up Switches

Door Cords

V-Plex Smoke Detectors

Strobes, Power Supplies

Accessories

Sensors

www.honeywell.com/security

Imagine never having to compromise between

performance and false alarm prevention again.

More dealers are choosing Honeywell’s DUAL TEC

sensors for this very reason.

The winning combination of microwave and PIR

technologies enable the sensors to actually distinguish

between real intruders and other environmental conditions.

For an alarm to occur with a DUAL TEC, both the PIR

and the microwave sensor must “confirm” each other

and detect an intruder within the defined protection

area. The result? Optimum performance and minimal

false alarms.

Honeywell offers a wide range of DUAL TECs—including

sensors that provide up to 100 lbs. of pet immunity;

wall, ceiling or flush mount versions and anti-masking

devices for high security applications. Choose from

hardwired, wireless or V-Plex polling loop versions for

the ultimate installation flexibility.

There is a DUAL TEC to suit any application, from

residential and commercial to the most robust

industrial environments.

By combining microwave and PIR technologies,

Honeywell’s DUAL TEC sensors offer you the

best of both worlds—superior detection and

fewer false alarms.

DUAL TEC®... THE BEST OF BOTH WORLDS

Sensors MOTION DETECTORS

DUAL TEC PIR/MICROWAVE

DT6100STC

Long Range DUAL TEC

• Range: 100' x 20'

• Map Signal Processing

• Temperature Compensation

• Fluorescent Light Filter

• Form C Relay

• Adjustable microwave and PIR settings

• Supervised microwave and PIR

• Trouble output

DT906

Long Range Anti Mask DUAL TEC

• Range: 200' x 15' and 120' x 10'

• Mirror Optics

• Dual coverage patterns - selectable

• Queue Logic event processing

• Selectable sensitivity modes

• Active infrared anti-mask system

• Self-test and continuous supervision

• 6' to 12' mounting height

• Zero Clearance bug guard

• Tampered

• Form C Relay

• Temperature Compensation

•

ALSO AVAILABLE:

DT907

- without anti-mask

DT900

Long Range Anti Mask DUAL TEC

• Range: 90' x 70' and 50' x 40' selectable

• Mirror optics

• Dual coverage patterns - selectable

• Queue Logic event processing

• Selectable sensitivity modes

• Active infrared anti-mask system

• Self-test and continuous supervision

• 6' to 12' mounting height

• Zero Clearance bug guard

• Tampered

• Form C Relay

• Temperature Compensation

•

ALSO AVAILABLE:

DT901

- without anti-mask

Commercial

MOTION DETECTORS

Honeywell offers the most comprehensive selection of motion

detectors in the industry. From traditional PIRs to DUAL TECs, we

have the right motion detector to meet any installation challenge in

hardwired, wireless or V-Plex polling loop versions.

Wide Angle Lens Top View

(DT-900 and DT-901 set for 27m(90’) range)

Barrier Lens - All Zones Top View (DT-906 and DT-907 set for 61m(200’) range)

Barrier Lens - All Zones Side View

Wide Angle Lens Side View

(DT-900 and DT-901 set for 27m(90’) range)

Side View

Barrier Lens

Sensors MOTION DETECTORS

www.honeywell.com/security

DUAL TEC PIR/MICROWAVE

Commercial

DT7550C

Anti-Mask DUAL TEC Motion Sensor

• Range: 50' x 60'

• Form C Relay

• Advanced DualCore Signal Processing

• K-Band technology for better pattern containment and pattern shaping

• Supervision-microwave, PIR and temperature compensation

• Uniform sensitivity optics

• Digital adaptive microwave thresholds

• Digital fluorescent light filter

• Anti-mask detection

• Dual Slope Temperature Compensation

• Patented Zero Clearance Black Bug Guard

• Patented mirror look down

• Trouble output relay

• Perfect when high security and system integrity are important

DT7450

Commercial DUAL TEC Motion Sensor

• Range: 50' x 60'

• Advanced DualCore Signal Processing

• K-Band technology for better pattern containment and pattern shaping

• Supervision-microwave, PIR and temperature compensation

• Uniform sensitivity optics

• Digital adaptive microwave thresholds

• Digital fluorescent light filter

• Dual Slope Temperature Compensation

• Patented Zero Clearance Black Bug Guard

• Patented mirror look down

•

ALSO AVAILABLE:

DT7450C

- Form “C” Relay

DT6360

Ceiling Mount DUAL TEC

• Range: 50' diameter 360° coverage

• 8' to 16' mounting height

• DualCore Micro-Based Processing

• Digital fluorescent light filter

• Surface mount or flush mount

• Front and rear tamper switches

• Selectable pulse count

• Dual Slope Temperature Compensation

Sensors MOTION DETECTORS

DUAL TEC PIR/MICROWAVE

DT7235T

DUAL TEC Motion Sensor

• Range: 35' x 40'

• 100 lb. Animal Immunity

• No adjustments to set

• K-Band technology for better pattern containment and pattern shaping

• Sturdy, attractive housing

• Uniform sensitivity optics

• Temperature compensation

• Patented Zero Clearance Black Bug Guard

• Patented mirror look down

• Microwave supervision

DT7435

DUAL TEC Motion Sensor

• Range: 35' x 40'

• 100 lb. animal immunity

• Advanced DualCore Signal Processing

• K-Band technology for better pattern containment and pattern shaping

• Uniform sensitivity optics

• Digital adaptive microwave thresholds

• Digital fluorescent light filter

• Dual Slope Temperature Compensation

• Patented Zero Clearance Black Bug Guard

• Patented mirror look down

• High security lens included

•

ALSO AVAILABLE:

DT7435C

- Form “C” Relay

DT515

MiniTek Motion Sensor

• Range: 15' x 15' or 360° x 15'

• ASIC-based PIR with S-Band microwave

• Wall, corner or ceiling mount

• Surface, flush mount or swivel mount

• Totally silent relay

• Selectable pulse processing

• Dual Slope Temperature Compensation

Commercial/Residential

www.honeywell.com/security

Sensors DUAL TEC FAMILY FEATURE CHART

Pet Immune to 100 lbs.

Coverage Pattern

Signal Processing

Optical Technology

Microwave Frequency Band

Microprocessor

Environmental Adaptation

Temperature Compensation

Digital Fluorescent Filter

Analog Fluorescent Filter

Anti-Masking

Walk Test Mode

PIR Sensitivity Adjustment

Microwave Adjustment

Vertical/Horizontal Adjustment

Trouble Output

Tamper Switch(es)

Alarm Relay Forms

LED Indicators

Microwave Supervision

PIR Supervision

Recommended Mtg Height

Operating Temperature (°c)

Input voltage (VDC)

Maximum Current (ma)

Swivel Bracket Options

FEATURES

DT7235T

DT7435

DT7450

DT7550C

DT435T

DT450T

DT640STC

DT660STC

DT6100STC

DT6360STC

DT7360

DT500

DT900/901

DT906/907

5897-35

Quest 2260SN

50'x40'

90'x70'

Queue

Event

Logic

Uniform

Sens

Uniform

Sens

Uniform

Sens

Uniform

Sens

Uniform

Sens

•• •

35'x40' 35'x40' 50'x60' 50'x60' 50' Diam. 35'x30' 50'x40' 35'x30' 40'x40' 60'x60' 100'x20' 50' Diam

Std Dual Core Dual Core Dual Core Dual Core Std Std Adv MAP MAP MAP MAP

Mirror Std Std Std Std Std Mirror Mirror Mirror

KK K K K X X S XX X X XX

•• •• • ••• •••

•• • •

•

•••

Std Adv Adv Adv Std Std Std Std Std Std Std Adv Adv

•• •• ••

•• ••••

•

DT900 only DT906 only

• • • • • • •• • • ••

••

• • •• • • ••

• • • • •• • • • •• • • ••• •••

A A,C A,C C C A,C A,C A C C C C C C

1LED Tri-Color Tri-Color Tri-Color 3LEDs 3LEDs 3LEDs 3LEDs 3LEDs 3LEDs 3LEDs 3LEDs 3LEDs 3LEDs

••• ••• ••••••••

•• •• • ••• •••

7' 6" 7' 6" 7' 6" 7' 6" 8’ to 16’ 7' 6" 7' 6" 7' 6" 7' 6" 7'6" 7'6" 8’ to 16’ 6' to 12' 6' to 12'

-10 to 55 -10 to 55 -10 to 55 -10 to 55 0 to 49 0 to 49 0 to 49 10 to 49 0 to 49 0 to 49 0 to 49 0 to 49 0 to 49 0 to 49

7.5 - 1 6 7.5 - 1 6 7.5 - 1 6 7.5 - 1 6 10 - 14.5 9 - 14 10 - 14.5 10 - 14.5 10 - 14.5 10 - 14.5 10 - 14.5 10 - 14.5 10 - 15 10 - 15

25 35 35 40 40 35 35 35 35 35 40 40 35 35

SMB-10 SMB-10 SMB-10 SMB-10 SMB-10 SMB-10 SMB-10 SMB-10 SMB-10 SMB-10 Included Included

SMB-10T SMB-10T SMB-10T SMB-10T SMB-10T SMB-10T SMB-10T SMB-10T SMB-10T SMB-10T

Queue

Event

Logic

120'x10'

200'x15'

Std

•

Adv

•

VPlex

2LEDs

•

7' to 8'

10 to 50

-10 - 15

998SB

Std

•

Std

auto

•

2LEDs

•

7'6"

0 to 60

battery

60'x75'

35'x30'

DT7000 Series DT4 Series DT5 DT6 Series DT9 Series

V-Plex Wireless

Sensors DUAL TEC FAMILY FEATURES

FEATURES

Pet Immune to 100 lbs.:

Sensor is immune to pets and other animals with combined weight of 100 lbs when installation guidelines for pet immunity are followed.

Coverage pattern:

Length by width of area protected.

Signal Processing:

Analysis performed on PIR and microwave signals to determine alarm conditions.

• DualCore: Signals are analyzed in multiple domains, including amplitude, time, frequency and duration. Supports functions including diagnostics and other advanced false alarm features.

• C

: Correlates data from both channels

simultaneously, instead of independently processing each

• MAP: Timing and sequence of signals are compared to settings for specific environments to qualify each channel individually

• Queue Event Logic: Pulse counting while looking for specific sequences of events

• Advanced: Pulse counting with timing relationships

• Standard: Basic pulse counting

Optical Technology:

Technology used to collect infrared radiation for PIR processing.

• Uniform Sensitivity: Fresnel lens that provides the same sensitivity at the edge of the pattern as exists directly in front of the sensor

• Split-Zone: Zones are split into two sub-zones where each sub-zone has half the sensitivity of a regular zone, requiring targets to be in both zones for an alarm

• Standard: Basic Fresnel lens

• Mirror: Basic mirror optics

Microwave Frequency Band:

Frequency at which the microwave signal is radiated and received. Higher frequencies generally penetrate non-metallic objects less than lower frequencies.

• S-Band: 2.54 GHz

• X-Band: 10.525 GHz

• K-Band: 24.125 GHz

Environmental Adaption:

Microwave thresholds are adapted either in hardware or digitally to remove the effect of low level interference such as ceiling fans.

Temperature Compensation:

Sensor automatically adjusts PIR thresholds and/or other parameters to adapt to change in ambient temperature relative to human body temperature.

• Standard: Compensates at ambient temperatures below body temperature

• Advanced: Compensates at ambient both below and above body temperature

Digital Fluorescent Light Filter:

Software algorithms provide infinite rejection of microwave interference due to fluorescent lights.

Analog Fluorescent Light Filter:

Hardware circuitry provides rejection of microwave interferences due to fluorescent lights.

Anti-Masking:

Detects intentional and accidental blocking of the PIR optics.

Walk Test Mode:

Determines the coverage pattern and functionality for both the PIR and microwave channels, usually through LED indicators.

PIR Sensitivity Adjustment:

Selectable option to change the PIR process sensitivity, usually through a DIP switch or jumper link.

Microwave Sensitivity Adjustment:

Selectable option to change the microwave sensitivity and/or range, usually through a potentiometer.

Vertical Adjustment:

Capability to adjust the vertical PIR detector position relative to the optics, usually through a vertical shift in the PCB. Usually used to adjust range at different mounting heights, or accurately set the coverage pattern for different lenses or mirrors.

Horizontal Adjustment:

Capability to shift the PIR zones left or right by a few degrees. Usually used to locate potential false alarm sources, such as a heating vent between zones, or to aim the optics in a particular direction, such as a hallway.

Trouble Output:

Separate output used to indicate supervision failures and/or anti-mask detection to the control panel.

Alarm Relay Forms:

Type of output relay used to signal panel when an intrusion is detected.

• Form A: Two-terminal relay with Normally Closed output when energized

• Form C: Three-terminal relay with both Normally Closed and Normally Open outputs when energized

LED Indicators:

Light Emitting Didoes used to provide visual feedback about alarm state, supervision, walk test, and other modes of operation.

• 1 LED: Single red LED

• 3 LEDs: Red, green, yellow LEDs, usually with PIR and microwave channels associated with a specific color

Microwave Supervision:

Automatic self-test of microwave channel for proper operation.

PIR Supervision:

Automatic self-test of microwave channel for proper operation.

Recommended Mounting Height:

Suggested height to mount processor for optimal performance. Usually important for pet immune applications.

Operating Temperature:

Temperature range at which the sensor can be expected to provide adequate protection. UL certification may have a narrower range.

Input Voltage:

Voltage range at the terminal strip at which the sensor will operate. UL may have certified for a slightly narrower range.

Swivel Bracket Options:

Brackets used to mount sensors in installations that have special aiming or mounting heights.

www.honeywell.com/security

PIRs

Sensors MOTION DETECTORS

IS215TCE

Entry Level PIR

• Range: 40' x 40'

• Dual slope temperature compensation

• Microprocessor based

• Selectable pulse count

• Uniform sensitivity optics

• Patented look down mirror

• Patented Zero Clearance Black Bug Guard

• Tamper switch

IS215T

Entry Level PIR

• Range: 40' x 40'

• Selectable pulse count

• Uniform sensitivity optics

• Patented look down mirror

• Patented Zero Clearance Black Bug Guard

• Tamper switch

NEW

Top View

Wide Angle Lens

Top View

Wide Angle Lens

Side View

Wide Angle Lens

Side View

Wide Angle Lens

IS216T-CUR

Curtain PIR

• Range: 33' x 5.5'

• Dual slope temperature compensation

• Microprocessor based

• Selectable pulse count

• Uniform sensitivity optics

• Patented look down mirror

• Patented Zero Clearance Black Bug Guard

• Tamper switch

Top View

Side View

NEW

Sensors MOTION DETECTORS

PIRs

Top View Pet Immune Lens

Side View Pet Immune Lens

Top View Long Range Lens

Side View Long Range Lens

AURORA

Pet Immune PIR

• Range: 35' x 45'

• Pet immunity to 40 lbs.

• Selectable pulse count

• ASIC Signal Processing

• Ultra-low current

• Totally silent relay

• Bi-Directional Temperature Compensation

•

ALSO AVAILABLE:

AURORA-LR

– 75' x 10' long range lens

AURORA-T – with tamper AURORA-PK – 6-pack

Sensors SURFACE MOUNT CONTACTS

www.honeywell.com/security

PIRs

IS25100TC

Long Range PIR Detector

• Range: 100' x 20'

• Form C relay

• Alarm memory

• Case and wall tamper

IS2560

Wide Area PIR Detector

• Range: 60' x 85'

•

ALSO AVAILABLE: IS2560TC

• Form C Relay

• Alarm memory

• Case and wall tamper

IS2535

Selectable Pet Immune PIR Detector

• Range: 35' x 40'

• 0, 40 or 80 lbs. selectable pet immunity

•

ALSO AVAILABLE: IS2535TC

• Form C Relay

• Alarm memory

• Case and wall tamper

IS2500 Common Features

• 45º terminal blocks

• DIP switch programming

• Spare EOL terminals

• Automatic Walk Test mode

• Four sensitivity settings

• (2.3m to 2.7) 7’6” to 9’ mounting height

• Uniform Sensitivity Optics

• Patented Mirror Look Down

• SIA PIR-01 false alarm compliant

•

EN50131-1 and TS50131-2-2

grade 2, class II

• Dual Slope Temperature compensation

• Works with SMB10 family of swivel brackets

• Microprocessor controlled

• Totally silent tamper proof relay

NEW

Sensors MOTION DETECTORS

PIR

995

Recess Mount PIR Motion Sensor

• Range: 40' x 56' (12m x 17m) coverage pattern

• Fits single gang box or can be recessed into a wall

• Built in Signature Analysis pulse count reduces false alarms

• Horizontal and vertical adjustments

•

ALSO AVAILABLE:

995PA

– Pet Alley Lens, 40' x 56'

995LA – Long Range Lens, 70' x 8-1/2'

Top View

Long Range Lens

Side View

Long Range Lens

Side View

Pet Alley Lens

Side View

Standard (Wide-angle) Lens

Top View

Pet Alley Lens

Top View

Standard (Wide-angle) Lens

www.honeywell.com/security

Sensors MOTION DETECTORS

IS280CM

360° Ceiling Mount PIR

• Range: 45' dia. @ 10' mounting height 50' dia. @ 12' mounting height

• Mounting heights from 8' to 12'

• Low profile housing

• Microprocessor-based signal processing

• Sealed optics chamber

• Can be mounted on a single gang-box

• Cover tamper

• Selectable pulse count

• Dual Slope Temperature Compensation

PIRs – CEILING MOUNT

997

Ceiling Mount PIR Motion Sensor

• Up to 36' (11m) diameter coverage pattern

• 360˚ look-down capability

• 8' to 12' mounting height

• Twist off cover for easy removal

• Locally and remotely controllable walk test LED

• Selectable pulse count

Top View

10 ft

(3.1m)

8 ft

(2.4m)

EDCBA BCDE

22 ft

(6.7m)

27.5 ft (8.4m)

13 ft (4m)

16.25 ft (4.95m)

7 ft

(2.1m)

8.75 ft

(2.67m)

(0.9m)

3.75 ft

(1.14m)

3 ft

(0.9m)

3.75 ft

(1.14m)

7 ft

(2.1m)

8.75 ft

(2.67m)

13 ft (4m)

16.25 ft (4.95m)

22 ft

(6.7m)

27.5 ft (8.4m)

Sensors MOTION DETECTORS

MOTION SENSOR ACCESSORIES

LENS OPTIONS

• For use with DT7235, DT7435,

DT7450,

or DT7550 families

DT7000-PALK

Pet Alley Lens Kit

Pet Alley for

DT7235 and DT7435

Package of 10 lenses

MOUNTING BRACKETS

• For use with DT515, DT7XXX, DT6100, ISXXX and 5894PI series of detectors

SMB10

Swivel Mount Bracket

(pack of five)

SMB10C

Ceiling Mount Bracket

(pack of five)

SMB10T

Tampered Swivel Mount Bracket

(pack of five)

High Security Lens

Long Range Lens

Pet Alley Lens

DT7000-LRLK

Long Range Lens Kit provides

– 50' x 10' when used with

DT7450/DT7550 or

– 35' x 8' when used with

DT7235

or DT7435

– Package of 10 lenses

DT7000-HSLK

High Security Lens Kit provides

– 35' x 40' area protection – To convert

DT7235 or DT7435 to

non-pet immune

– Package of 10 lenses

NEW

Sensors MOTION DETECTORS

4275EX-SN

V-Plex Mirror PIR Motion Sensor

• Range: 35' x 45' (11m x 14m) coverage pattern

• Built-in remote point module with serial number addressing

• Optional long range mirror included

• Extremely low current

• Tampered cover

•

ALSO AVAILABLE:

4275EX

- with DIP switch addressing

4278EX-SN

V-Plex Quad Mirror PIR Motion Sensor

• R

ange: 40' x 50' (12m x 15m)

coverage pattern

• Built-in remote point module with serial number addressing

• Alternate polarity quad processing for improved false alarm immunity

• Horizontal adjustment for flexibility

• Long range mirror included

• Tampered cover

•

ALSO AVAILABLE:

4278EX

- with DIP switch addressing

V-Plex

By utilizing only two wires, Honeywell’s patented V-Plex polling

loop technology provides point identification to central monitoring

stations, reduces wire runs and offers economical expansion of

peripheral devices.

PIRs – V-Plex

www.honeywell.com/security

Top View

Side View

Top View

Top View Wide Angle Mirror

Side View Wide Angle Mirror

Top View Long Range Mirror

Side View Long Range Mirror

Sensors MOTION DETECTORS

PIRs – V-Plex

QUEST2260SN

V-Plex DUAL TEC®Motion Sensor

• Range: 60' x 75'

• Serial number addressable

• Conditional Microwave Mode saves current in large installations

• Automatic adaptation to environmental disturbances

• Infinite rejection of fluorescent lights with patented digital filter

• Continuous microwave and PIR supervision

• Accu-Trak feature checks for environmental disturbances

• Smart sensor mode, speeds up Vplex bus while disarmed

998MX

V-Plex PIR Motion Sensor

• Range: 50' x 50'

• Dipswitch or S/N addressable

• Temperature Compensation

• Look-Down Zone

• Long Range Lens (100' x10') included

• Pet Alley Lens (50' X 70') included

Standard Lens

Pet Alley Lens

Sensors ACCESS CONTROL SENSORS

ACCESS CONTROL SENSORS

IS310

Request to Exit PIR

• Adjustable relay time

• Micro-based signal processing

• Adjustable tamper proof shutters provides precise target area

• Terminal block design

• Large wiring channel

• DIP switch programmable

• Two

form “C” outputs

•

AVAILABLE IN:

IS310WH

– White

IS310BL – Black RTE6PKWH – 6 Pack - White RTE6PKBK – 6 Pack - Black

Honeywell’s family of Request-to-Exit (RTE) access control

sensors are available in both basic and full-featured models to

suit any access control application. The quick-install RTEs are

extremely flexible, provide a generous amount of wiring room

and contain built-in internal shutters to guard against tampering.

All units share the same sleek, sophisticated look, letting you

match the aesthetics of any room.

Tamper

Terminal

Block

Design

Largest

Wiring

Channel

Sounder

Adjustable

Volume Control

Black

Bug

Guard

DIP switch

Internal

Tamperproof

Shutters

IS320

Request to Exit (RTE)

www.honeywell.com/security

IS320

Request to Exit PIR

• Same features as IS310 plus

• Piezo sounder

• Door contact input

• Reader/keypad/keyswitch input

• Remote arming and sounder inputs

• Door monitor and failsafe/secure modes

• AVAILABLE IN:

IS320WH

– White

IS320BL – Black

•

ALSO AVAILABLE:

IS310 WHTP

– Single Gang Trim Plate-White

IS310 BLTP – Single Gang Trim Plate-Black

Sensors ENVIRONMENTAL SENSORS

ENVIRONMENTAL SENSORS

TS300

Dual Temperature Sensor

• Simultaneous operation of local and remote probes

• Local sensor 32˚ to 140˚ (0˚ to 60˚C) +/-3˚F (+/- 1.7˚C)

• Remote probe -40˚ to 140˚F (-40˚ to 60˚C) +/-4˚F (+/-2.2˚C)

• Programmable hysteresis prevents multiple alarms

• Local audio alarm with silence timeout

• Alarm memory (up to 8 events)

• Two programmable outputs

•

ALSO AVAILABLE:

T280R/TS300R

– Remote Temperature Probe

470-12

Water Sensor

• Will detect water or any conductive nonflammable liquid

• Ideal for placement by sump pumps, washing machines, kitchens, etc, where flooding is a possibility

• 12 VDC, low current drain

• Form C (SPDT) output

• Provided with two sensitivity settings for greater flexibility

• Includes one remote water probe

470PB

Vibration Contact

• Protects ceilings, walls, safes and glass

• Adjustable sensitivity

• Small and inconspicuous

•

ALSO AVAILABLE:

11WH

– white

11BR – brown

5821

Wireless Temperature Sensor and Flood Detector

• Five selectable temperature ranges

• Local or remote temperature probe

• Up to ten year battery life

• Transmits supervisory, tamper and low battery

• Dimensions: 3" H x 1-1/2" W x 7/8" D

•

ALSO AVAILABLE:

T280R

– Remote Temperature Probe

470PB – Remote Water Probe

NEW

T280R

470PB

Sensors PHOTOELECTRIC BEAMS

www.honeywell.com/security

PHOTOELECTRIC BEAMS

Active Infrared Photoelectric Beams

• Single and dual beam models with range up to 250'

• Suitable for outdoor or indoor installations

• Easy alignment features reduce installation time

• Adjustable beam blocking time

• Includes pole mount kit

Honeywell’s IntelliBeam sensors combine all the great features of

high-end photobeams in a cost-effective dual detector, offering the

ultimate protection at an incredible value. Available in single and dual

models, there’s an IntelliBeam to suit any application.

IB100D

Dual Photoelectric Beams

• 100' range max. outdoor

IB200D

Dual Photoelectric Beams

• 200' max. outdoor range

IB250S

Single Photoelectric Beams

• 250' range max. outdoor

Sensors

FlexGuard lets you provide your customers with the

highest level of security, unmatched detection and

false alarm immunity without labor and installation

headaches or costly service calls.

FlexGuard is also the industry’s most versatile

glassbreak—the only one to offer a choice of

hardwired, wireless or V-Plex polling loop technology

for the ultimate in installation flexibility. It makes

perimeter protection as easy to provide and

trouble-free as any other part of the system.

FlexGuard detectors mount virtually anywhere—on

walls, window frames or ceilings—and are UL and ULC

listed for all glass types, including plate, tempered,

laminated, wired, film-coated and sealed insulating.

Rigorously challenged in test rooms built to exceed

the toughest standards, it’s no wonder there are more

installed worldwide than any other brand of glassbreak.

Dealers worldwide rely on Honeywell’s

FlexGuard®glassbreak detectors as a first

line of defense because they help keep

intruders where they belong—outside.

GLASSBREAKS… YOUR FIRST LINE OF DEFENSE

Sensors GLASSBREAK DETECTORS

www.honeywell.com/security

GLASSBREAK DETECTORS

FG1625

Glassbreak Detector

• FlexCore™ processing

• New hinged-case styling - nearly 180° opening

• Four adjustable sensitivity settings

• 25' range / no minimum range

• Remote test mode activation

• Protected PCB

• UL listed for coated and double-pane glass

•

ALSO AVAILABLE:

FG1615

- Non-adjustable with 15' fixed range

FG1625T - Tamper / Form “C” Relay

FG1625F

Flush Mount Glassbreak Detector

• FlexCore™ processing

• Flush mount design covers any single-gang electrical box

• Four adjustable sensitivity settings

• 25' range / no minimum range

• Remote test mode activation

• Protected PCB

• UL listed for coated and double-pane glass

•

ALSO AVAILABLE:

FGW1525FD

- covers double-gang electrical boxes

5853

Wireless Glassbreak Detector

• FlexCore™ processing

• Set-up and performance identical to the FG1625

• Hinged-case styling - nearly 180˚ opening

• Easily replaceable batteries with up to 10 year battery life

• Four selectable sensitivity settings (max, medium, low & lowest)

• 25' range / no minimum range

• Covers all glass types

• Remote test mode activation

• Protected PCB

• UL listed for coated and double-pane glass

FG1625RFM

Flush Mount Glassbreak Detector

• FlexCore™ processing

• Recess mounts in a 1" diameter hole in ceilings or walls

• Four adjustable sensitivity settings

• Staggered “T” terminals for easy wiring

• 25' range / no minimum range

• Remote test mode activation

• UL listed for coated and double-pane glass

Sensors GLASSBREAK DETECTORS

GLASSBREAK DETECTORS

FG730

Glassbreak Detector

• Dual Technology Flex-Audio Principle

• Signal verification

• 30' range

• UL listed for coated and double-pane glass

FG1625R

Glassbreak Detector

• FlexCore™ processing

• Round case styling

• Four adjustable sensitivity settings

• 25' range / no minimum range

• Remote test mode activation

• Protected PCB

• UL listed for coated and double-pane glass

•

ALSO AVAILABLE:

FG1625RT

- Tamper / Form “C” Relay

FG1625SN

V-Plex Glassbreak Detector

• FlexCore™ processing

• Serial number addressable*

• Set-up and performance identical to the FG1625

• Four adjustable sensitivity settings

• 25' range / no minimum range

• Remote test mode activation

• Protected PCB

• UL listed for coated and double-pane glass

*For use with Honeywell V-Plex addressable control panels.

FG1608

Glassbreak Detector with Magnetic Contact

• FlexCore™ processing

• Built-in magnetic contact

• High/Low sensitivity setting

• 8' range / no minimum range

• Remote test mode activation

• UL listed for coated and double-pane glass

• Magnetic contact gap: 7/8

" make/

2-3/16

" break

FG1025Z

Glassbreak Detector with Exclusion Zone

• Patented Time-of-Arrival processing with dual microphones improves false alarm immunity in its “Exclusion Zone”

• Four adjustable sensitivity settings

• 25' range / no minimum range

• Remote test mode activation

• UL listed for coated and double-pane glass

ASC-SS1

Shock Glassbreak Detector

• Range: 8' maximum

• Mounts directly on glass surface

• Outstanding false alarm immunity

• Epoxy sealed against moisture and corrosion

• Glass types: plate, tempered, laminated, wired, coated, double-pane

Sensors GLASSBREAK DETECTORS & INDOOR SOUNDERS

www.honeywell.com/security

GLASSBREAK DETECTORS

FGW1525T

Universal Wireless Glassbreak Detector

• FlexCore™ processing

• Compatible with any 3.6 or 9 Volt wireless transmitter

• Easily replaceable batteries

• Four adjustable sensitivity settings

• 25' range / no minimum range

• Remote test mode activation

• Protected PCB

• UL listed for coated and double-pane glass

5800SS1

Wireless Shock Glassbreak Sensor

• Perfect for kitchens, bathrooms, skylights and occupied areas

• Mounts directly on glass surface with 3M adhesive tape

• 10' detection range

• Pull battery tab and enroll no need to remove cover during installation

FG701

Glassbreak Simulator/Tester

• Compatible with all IntelliSense and ADEMCO Glassbreak Detectors

• Remote test mode activation operates from 15' away*

• Calibrated signal output to allow true range verification

• Low battery announcement

• Digitally produced glassbreak sound

*When used with FG1500 and FG1600

Series Glassbreak Detectors

INDOOR SOUNDERS

WAVE2

Two-Tone Siren

• Attractive patented design fit single gang wall plate

• Snap-open hinged case cover for faster

installation

• Louder (106

) dual tone siren output

• Terminal strip eliminates splicing and

soldering

• Corner or ceiling mounting with no

additional brackets or hardware

• Channeled case back for convenient

wiring access

• UL Commercial Burglary

WAVE2PD

Two-Tone Piezo Dynamic Siren

• Half the weight of standard sirens

• 1/3 the current requirements of standard sirens

• Terminal strip eliminates soldering and splicing

• Snap-open hinged case cover for faster installation

• ALSO AVAILABLE:

WAVE2PDT

- tampered version

WAVE

Speaker

• Attractive patented design fit single gang wall plate

• Snap-open hinged case cover for faster installation

• Two positions terminal block eliminates splicing and soldering

• Corner or ceiling mounting with no additional brackets or hardware

• Channeled or horizontal mounting for great versatility

• 8 ohms/15watts

NEW

Sensors INDOOR SOUNDERS & SOUNDING DEVICES

INDOOR SOUNDERS

WAVEF

Flush Mount Speaker

• Unique hinged case design allows for installation without disassembly

• Fits a standard double gang electric box

• Easy terminal block wire connections

• Attractive new design

• 10 watt power rating (15 watt peak)

WAVE2F

Two-Tone Flush Mount Siren

• Same performance as Wave 2

• Unique hinged case design allows for installation without disassembly

• Fits a standard double gang electric box

• Easy terminal block wire connections

• Attractive new design

748

Dual Tone Siren

• Extremely Loud (119dB)

• Smaller - mounts directly to wall or 4" electrical box

• Dual tone output - steady and warble

• Ready to mount no disassembly required

• Tamper proof and weather resistant

• Attractive, can be used

indoors or outdoors

• Snap on trim ring conceals screws

SOUNDING DEVICES

748LC

Dual Tone Siren

• Low current draw, 550mA@ 12VDC (112dB)

• Smaller - mounts directly to

wall 4" electrical box

• Dual tone output steady and warble

• Ready to mount no disassembly required

• Tamper proof and weather resistant

• Attractive, can be used indoors or outdoors

• Snap on trim ring conceals screws

749

Speaker/Horn

• 8 ohms/20 watts (25 watts peak)

• Smaller - mounts directly to wall or 4" electrical box

• Dual tone output steady and warble

• Ready to mount no disassembly required

• Attractive, can be used indoors or outdoors

• Snap on trim ring conceals screws

5800WAVE

Wireless Siren

• Plug into any standard duplex receptacle

• 95 dB @ 3 feet

• 12 hour battery backup

• Ready to mount no disassembly required

• Transmits status, tamper,

low battery, supervisory

and AC signals

Sensors SOUNDING DEVICES

www.honeywell.com/security

702

Self-Contained Electronic Siren

• 6 to 12VDC combination speaker and siren driver

• Dual tone - warble or steady

• Enclosed wires

• 30 watt power rating

• Protective cabinet available

743BE

• Built-in Tamper Plate protects wires from attack

713

High Power Speakers

• Powerful 40 watts, 8 ohm speaker

• Weather resistant housing

• Ideal for indoor and outdoor applications

• Jacketed 3-conductor lead included tamper loop

SOUNDING DEVICES

747

Self Contained Indoor Siren

• Two tones - steady and warble driver is built-in

• Durable ABS plastic

•15 watt power rating

• Easy mounting with

hardware included

• High quality mylar cone

• Heavy duty magnet

•

747UL also available

747F

Self Contained Indoor Siren

• 95dB outputs at 12VDC

• Flush mount

• Two tones - steady and warble

• High quality mylar cone

• Heavy duty magnet

• Durable ABS plastic

• Attractive designer case

• Hardware included

746

Indoor Speaker

• Easy to mount on wall

• 15 watts continuous, 20 watts peak

• Double polyurethane coated voice coil prevents corrosion

• Mounting hardware included

• Heavy duty magnet

746F

Indoor Speaker

• Flush mount

• 15 watts continuous, 20 watts peak

• Double polyurethane coated voice coil prevents corrosion

• Mounting hardware included

• Heavy duty magnet

747PD

Two-Tone

Piezo-Dynamic

Indoor Siren

• Half the weight of standard sirens

• 1/3 the current requirements of standard sirens

• Terminal strip eliminates soldering and splicing

• Snap-open hinged case cover for fast installation

•

ALSO AVAILABLE:

747PDT

tampered version

NEW

Sensors SOUNDING DEVICES, SIREN DRIVERS, BELLS & BOXES

SOUNDING DEVICES

735BE

Cabinet Including Speaker

• Includes 705-820, 8 ohm, 20 watt speaker

• Tampered cabinet

• Reduced installation time

ALSO AVAILABLE:

• 742BE for 5" diameter siren or speaker

•

743BE 10" cabinet for 702 external siren

• For tamper provision, use the

955WH

and 28-2 bracket

719

Self-Contained Electronic Siren

• Combination speaker and siren driver

• Dual tone - warble and steady

• 6 to 12VDC power input

• Small size - 5" diameter

• Indoor or outdoor use

• Weather resistant, high impact construction

•

ALSO AVAILABLE:

705-820

20 Watt Speaker made of durable

ABS plastic

744

Multi-Tone Siren Driver

• Separates burglary and fire alarm sounds

• Powers many combinations of speakers (series, parallel, or series-parallel)

• Operates on 12VDC

• Highest output (119dB) in its category

• 6 jumper-selectable tones

AB12M

Motorized Bell in Box

• Required on UL Grade A installation

• Motorized bell with only 100 mA current draw at 12VDC

• Extra heavy steel

• 10

" underdome bell

• Two tamper switches

• Insulated inner box

• Fully tampered for protection from attempts to open, drill or chisel through cabinet

1011BE12M

Motorized Bell in Box

• 10" motorized bell

• Low current draw only 100 mA current draw at 12VDC

• Fully tampered for protection from attempts to open, drill or chisel through cabinet

SIREN DRIVERS, BELLS & BOXES

Sensors SURFACE MOUNT CONTACTS

www.honeywell.com/security

SURFACE MOUNT CONTACTS

Available in

Ammo Box

Available in

Ammo Box

Individually Packaged Magnetic Contacts

• 50 individually packaged contacts per Ammo Box

• Perforated bags let you take only as many as needed

• Each bag contains all needed parts, including screws, spacers, etc.

• Sequential numbers on bag tell you how many are left in the box

Honeywell’s unique Ammo Box packaging provides security professionals

with an entirely new level of installation convenience and inventory control.

Each Ammo Box contains an “ammo belt” of 50 individually packaged

magnetic contacts complete with screws, spacers and covers. Simply tear

off the perforated, incrementally numbered bag. The number on the next

bag indicates the quantity left in the Ammo Box.

7939WG

Magnetic Contact

• Ideal for residential or commercial use

• Standard gap: 1-1/4" (32mm)

• Spacers, covers and screws included

ALSO AVAILABLE: 7939WG-WH

– White

7939WG-BR – Brown 7939WG-GY – Grey 7939WG-WH-M – Extra magnet (10 pack) 7939WG-BR-M – Extra magnet (10 pack) 7939WG-GY-M – Extra magnet (10 pack)

• SPDT (Form C) Contact

• Standard gap: 1" (25mm)

• Spaces, covers and screws included

• Cover conceals end of line resistor (EOL)

7939-2

Magnetic Contact

ALSO AVAILABLE: 7939-2WH

– White

7939-2BR – Brown 7939-2GY – Grey 7939WH-M – Extra magnet (10 pack) 7939BR-M – Extra magnet (10 pack) 7939GY-M – Extra magnet (10 pack)

Available in

Ammo Box

Look for contacts featuring the “Available in Ammo Box” symbol throughout this catalog!

Sensors SURFACE MOUNT CONTACTS

SURFACE MOUNT CONTACTS

7940

Universal Magnetic Contact

• The most versatile mounting options of any contact available – screw mount, adhesive mount or recess

• Super wide gap of 2" (51mm) is standard or 1" (25mm) end-to-end recessed

• Insulation displacement terminals eliminate stripping or soldering, just insert wires and tighten

• Recess adapter plugs included

ALSO AVAILABLE: 7940WH

– White

7940BR – Brown 7940WH-M – Extra magnet (10 pack) 7940BR-M – Extra magnet (10 pack)

Available in Ammo Box

943WG

Mini Magnetic Contact

• Standard gap: 1" (25mm)

• 12" (30cm) leads

• Self-adhesive or screw mount

ALSO AVAILABLE: 943WG-WH

– White

943WG-BR – Brown 943WG-WH-M – Extra magnet (10 pack) 943WG-BR-M – Extra magnet (10 pack)

Available in Ammo Box

945T

Miniature Magnetic Contact with Screw Terminals

• Screw mount or adhesive mount

• Screw terminals eliminate wire splicing and soldering

• Standard gap: 1-1/8" (29mm)

ALSO AVAILABLE: 945T-WH

– White

945T-BR – Brown 945T-GY – Grey 945WH-M – Extra magnet (10 pack) 945BR-M – Extra magnet (10 pack) 945GY-M – Extra magnet (10 pack)

Available in Ammo Box

Sensors SURFACE MOUNT CONTACTS

SURFACE MOUNT CONTACTS

www.honeywell.com/security

PAL-T

Magnetic Contact

• Patented hinged case cover–no loose parts

• Concealed screw terminals eliminate splicing and soldering

• 1-1/8" (29mm) gap makes installation a snap

• Screw mount or adhesive mount

• Six wire entry points for mounting versatility

• Conceals EOL resistor

Available in

Ammo Box

ALSO AVAILABLE: PAL-T-WH

– White

PAL-T-BR – Brown PAL-T-GY – Grey PAL-WH – With 5' leads (5 pack) PAL-M-WH – Extra magnet (10 pack) PAL-M-BR – Extra magnet (10 pack)

940

Magnetic Contact

• Miniature size perfect for homes and offices

• Attractive cover keeps mounting screws and terminals screws hidden

• Standard gap: 3/4" (19mm)

• Complete with spacers and mounting screws

• Cover hides EOL resistor

ALSO AVAILABLE: 940WH

– White

940BR – Brown 940WH-M – Extra magnet (10 pack) 940BR-M – Extra magnet (10 pack)

Available in

Ammo Box

950

Magnetic Contact

• Completely hides mounting screws and terminals

• Standard gap: 1-3/4" (45mm)

• Ideal for concealing end-of-line resistor (EOL)

ALSO AVAILABLE: 950BR

– Brown

950GY – Grey 950W-BR – Brown: wide-gap 2-1/4"(57mm) 950W-GY – Grey: wide-gap

2-1/4"(57mm)

945

Adhesive Mount Magnetic Contact

• Adhesive mount

• Standard gap: 1-1/4" (32mm)

• External test points standard

• 15 ft. (4.6m) leads

• Package Quantity 5 per bag

ALSO AVAILABLE: 945WH

– White

945BR – Brown 945WH-M – Extra magnet (10 pack) 945BR-M – Extra magnet (10 pack)

Patent # 6,135,826

Sensors SURFACE MOUNT CONTACTS & RECESS MOUNT CONTACTS

SURFACE MOUNT CONTACTS

PR-20445

Magnetic Contact with Leads

• Screw or adhesive mount

• 18" (46 cm) long wire leads

• Adhesive pads are pre-applied for fast easy installation – they do not need not be removed for screw mounting

• Standard gap: 1-1/4" (32mm)

ALSO AVAILABLE: PR-20445WH

– White

PR-20445BR – Brown PR-20445WH-M – Extra magnet (10 pack) PR-20445BR-M – Extra magnet (10 pack)

949

Magnetic Contact with Leads

• Screw mount

• External test points standard

• Standard gap: 1-1/4" (32mm)

• Complete with spacers and mounting screws

ALSO AVAILABLE: 949WH

– White

949BR – Brown

RECESS MOUNT CONTACTS

Truly one-of-a-kind, Honeywell’s Staggered T Series contacts provide you with

a whole new level of convenience and flexibility. By staggering the terminals,

we discovered a way to fit larger screw terminals without altering the

industry-standard 3/8" diameter case size–and without having to use any

special screwdrivers. The result? Easier wiring and faster installations.

Staggered T

Honeywell Exclusive

• Staggered T Terminals ensure a secure electrical connection

• Innovative design makes installation simple

951WG

3/8" Diameter Miniature Press Fit Magnetic Contact

• With a 3/4" (19mm) long magnet, the 951WG is ideal for casement windows, sliding windows, and other thin frame applications

•

Standard gap: 1-1/4" (32mm) – the largest gap of any mini 3/8" (10mm) contact

• 12" (30cm) leads are standard

Available in Ammo Box

ALSO AVAILABLE: 951WG-WH

– White

951WG-BR – Brown 951WG-WH-M – Extra magnet (10 pack) 951WG-BR-M – Extra magnet (10 pack)

Sensors RECESS MOUNT CONTACTS

RECESS MOUNT CONTACTS

www.honeywell.com/security

PRO51BTM

3/8" Stubby Recessed Contact with Rare Earth Button Magnet

•

Stubby 3/8" (10mm) press fit with button magnet fits even the tightest spots

• Powerful rare earth magnet is easy to install with screw or adhesive

• Standard gap: 1/2" (13mm)

• Magnet screw hole is convex for smooth flush fit

ALSO AVAILABLE: PRO51BTM-WH

– White

PROBTM – 10 pack button magnets

MPS99WG

3/8" Stubby Contact with Flat Magnet

• Standard gap: 1-1⁄4" (32mm)

• 12" (30cm) leads

• Adhesive mounting tape on magnet

ALSO AVAILABLE: MPS99WGW

– White

MPS99WGB – Brown

MPS95WG

3/8" Stubby Contact with 1⁄4" Magnet

• Standard gap: 1-1⁄4" (32mm)

• 12" (30cm) leads

ALSO AVAILABLE: MPS95WGW

– White

MPS95WGB – Brown

PR-20421

Press Fit Magnetic Contact

• 1/4" (6mm) diameter press fit

• Standard gap: 3/4" (19mm)

• 18" (46cm) long wire leads

ALSO AVAILABLE: PR20421

– White

941WH – White with 5' (1.5m) leads 941M – Extra 1/4" bare magnet

Sensors RECESS MOUNT CONTACTS

RECESS MOUNT CONTACTS

MPS70WG

3/4" Steel Door Contact

• Standard gap: 1-1⁄4" (32mm)

• 5/8" (16mm) gap for steel

• 12" (30cm) leads

ALSO AVAILABLE:

MPS70WGW

– White

MPS70WGB – Brown

MPS73WG

3/4" Contact with 3/8" Magnet

• Standard gap: 1-1⁄4" (32mm)

• 12" (30cm) leads

ALSO AVAILABLE:

MPS73WGW

– White

MPS73WGB – Brown

947

1" Steel Door Magnetic Contact

• The clean look of recessed contacts coupled with robust features that meet the requirements of steel doors

• 1" (25mm) diameter with “lock-in” mounting caps

• Standard gap 1/2" (13mm) in steel

• 5' (1.5m) zip cord leads are standard

• Includes 3/8" diameter by 1" long bare magnet

ALSO AVAILABLE:

947WH

– White

947BR – Brown

944T

3/8" Magnetic Contact with Screw Terminals

• 3/8" (10mm) diameter press fit design

• Screw terminals eliminates wire splicing and soldering

• Standard gap: 3/4" (19mm)

• Staggered T Terminals ensure a secure electrical connection

ALSO AVAILABLE:

944T-WH

– White

944T-BR – Brown 944WH-M – Extra magnet (10 Pack) 944BR-M – Extra magnet (10 Pack)

Available in Ammo Box

Sensors RECESS MOUNT CONTACTS

RECESS MOUNT CONTACTS

www.honeywell.com/security

944TRE

3/8" Magnetic Contact with Terminals and Rare Earth Magnet

• 3/8" (10mm) diameter press fit design

• Rare Earth button magnet

• Standard gap: 1/2" (13mm)

• Staggered T Terminals ensure a secure electrical connection

ALSO AVAILABLE: 944TRE-WH

– White

944TRE-BR – Brown PROBTM – 10 Pack of button magnets

944TSP

3/4" Contact with Terminals and 3/8" Magnet

• 3/4" (19mm) diameter switch for easier wiring; supplied with 3/8" (10mm) diameter magnet

• Standard gap: 3/4" (19mm)

• Staggered T terminals ensure a secure electrical connection

ALSO AVAILABLE: 944TSP-WH

– White

944TSP-BR – Brown 944TSP-GY – Grey 944WH-M – Extra magnet (10 Pack) 944BR-M – Extra magnet (10 Pack)

Available in Ammo Box

947-75T

Steel Door Magnetic Contact with Terminals

•

3/4" (19mm) recessed with 3/4" (19mm) magnet

and terminals

• 1/2" (12mm) gap in steel

• Staggered T terminals ensure a secure electrical connection

ALSO AVAILABLE: 947-75TWH

– White

947-75TBR – Brown

Available in Ammo Box

956RPT

Mini Roller Plunger Contact with Terminals

• Shorter body for easier recess fit

• Full 180° activation

• Staggered T terminals ensure a secure electrical connection

ALSO AVAILABLE: 956RPT-WH

– White

956RPT-BR – Brown 956WH-B – With 18" (46cm) leads white 956BR-B – With 18" (46cm) leads brown 956-2WH –

SPDT with 18" (46cm) leads white

Available in Ammo Box

955PST

Mini Plunger Contact with Terminals

• Broad face plunger distributes impact more evenly

• Staggered T terminals ensure a secure electrical connection

ALSO AVAILABLE: 955PST-WH

– White

955PST-BR – Brown

Available in Ammo Box

Sensors COMMERCIAL CONTACTS

960

XTP Surface Mount Magnetic Contact

• XTP contacts withstand surges up to 2400VDC

• The toughest commercial contact ever developed

• Rugged aluminum housing

•

Completely immersion proof (epoxy sealed)

• 3' (91cm) armored cable is standard

• Wide gap of 2-1/2" (64mm) is standard

ALSO AVAILABLE: 960

– SPST Switch (Form A)

960-2 – SPDT Switch (Form C)

7945

XTP Surface Mount Magnetic Contact with Leads

• XTP contacts withstand surges up to 2400VDC

• 6' (1.8m) CLII cable is standard

• Completely immersion proof (epoxy sealed)

• Wide gap of 2-1/2" (64mm) is standard

ALSO AVAILABLE: 7945WH

– White

7945BR – Brown 7945GY – Grey 7945-2GY – SPDT Switch (Form C)

COMMERCIAL CONTACTS

During lightning strikes or power surges, voltage can flow through the reed switch of a

magnetic contact — fusing the switch and rendering windows and doors unprotected.

For the surge protection you need, look to Honeywell’s robust XTP contacts.

968XTP

XTP High Security Switch

• Defeat-resistant from external magnetic tampering

• Includes tamper switch to notify of removal

• XTP protection (up to 2400VDC)

• Suitable for Indoor/Outdoor use

• Epoxy sealed for protection from moisture and corrosion

• 3' (91cm) stainless steel armored cable

ALSO AVAILABLE: 7945WH-M

– Spare magnet

7945BR-M – Spare magnet 7945GY-M – Spare magnet

Sensors COMMERCIAL CONTACTS

COMMERCIAL CONTACTS

www.honeywell.com/security

MPS80

Surface Mount Contact with Terminals

• Standard gap 2" (51mm)

• Industrial surface mount

• Includes spacers and mounting screws

ALSO AVAILABLE: MPS80WGW

– White

MPS80WGB – Brown

957

Overhead Door Magnetic Contact

• Rugged cast aluminum housing for protecting magnet

• Armored cable standard on every model (18") (46cm)

• Standard gap: 1" (25mm) minimum

• Unobtrusive design resists damage in high traffic areas

ALSO AVAILABLE: 957

– Standard gap 1" (25mm) minimum

957W – Wide gap 2" (51mm) minimum

958

Overhead Door Magnetic Contact

• Adjustable magnet with L bracket

• 24" (61cm) armored cable is standard

• Standard gap: 2-3/8" (60 mm) minimum

• Epoxy sealed for protection from moisture and impact

• Rugged “Shock Absorber” design protects reed against flex or damage to housing

ALSO AVAILABLE: 958

– SPST Switch (Form A)

958-2 – SPDT Switch (Form C) 958M – Spare magnet

959

XTP Overhead Door Contact

• Exceeds UL transient test withstanding surges up to 2400 Volts

• XTP contacts withstands surges up to 2400VDC

• The standard for OHD contact applications

• Adjustable magnet with L bracket

• Standard gap: 2" (51mm)

MPS51C

Overhead Door Contact

• Standard gap 2" (51mm)

• Form C

• 24" (61cm) armored cable

• Adjustable magnet bracket

MPS52

Overhead Door Contact

• Standard gap 2" (51mm)

• 24" (61cm) armored cable

• Adjustable magnet

Sensors V-PLEX

V-PLEX

4945SN

V-Plex Addressable Surface Mount Contact

• Mini-surface style with snap on cover to conceal mounted screws

• Standard gap: 3/4" (19mm)

• 5' (1.5m) CL II jacket cable

• Epoxy sealed for protection from moisture and impact

• Programmed from VISTA keypad

ALSO AVAILABLE: 4945SN-WH – White

4944SN

V-Plex Addressable Recessed Mount Contact

• Popular press fit design conceals reed, Point ID module and magnet in just 3/8" (10mm) diameter case

• For use with VISTA controls supporting Point ID serial number sensors

• Standard gap: 3/4" (19mm) end-to-end

• Factory installed 5' (1.5m) zip cord lead saves time

ALSO AVAILABLE: 4944SN-WH – White

Honeywell’s patented V-Plex polling loop technology literally defines price and performance

on a simple pair of wires. By utilizing only two wires instead of four, V-Plex offers significant

advantages over conventional four-wire installations—providing economical expansion of

peripheral devices and point identification to your central monitoring station.

4939SN

V-Plex Addressable Surface Mount Contact

• Programmable surface mount contact

• Compatible with control panels with serial number

device capabilities for multiplex polling loop

• Standard gap: 1-1/4" (32mm)

• 5' (1.5m) CLII jacketed cable

• Epoxy sealed for protection from moisture and impact

• Programmed from VISTA keypad or learn mode

4191SN

V-Plex Recessed Magnetic Contact

• Programmable recessed contact with built-in RPM (Remote Point Module)

• Compatible with control panels with serial number device capabilities for multiplex polling loop

• Press fit design in 1/2" (12mm) diameter case

• Factory installed 5' (1.5m) zip cord leads saves time

• Standard gap: 7/8" (22mm) end-to-end

ALSO AVAILABLE: 4191SN-WH

– White

4191WA – 3/4" (19mm) adapter for steel doors

ALSO AVAILABLE: 4939SN-WH

– White

4939SN-BR – Brown 4939SN-GY – Grey

4959SN

V-Plex Addressable Overhead Door Contact

• Rugged aluminum housing and adjustable L bracket type magnet

• Standard gap: 2" (51mm)

• 24" (61cm) armored cable

• Epoxy sealed for protection from moisture and impact

• Programmed from VISTA keypad

ALSO AVAILABLE: 4959SN

– Overhead Door Contact

Sensors TAMPER LOOP

TAMPER LOOP

www.honeywell.com/security

EMPS-10

8mm Diameter Recessed Contact with Tamper Loop

• 30cm (12") lead length

• Standard gap: 12mm (1/2")

• Tamper Loop for added security

• Package 1 per bag

ALSO AVAILABLE: EMPS-10W

– White

EMPS-10B – Brown

By adding a special tamper loop to the existing alarm circuit, this four-wired configuration makes it

difficult for potential intruders to tamper with the system—providing an added level of security.

944CE-WH

8mm Diameter Recessed Contact with Tamper Loop

• 3m (10ft.) jacketed leads

• Standard gap 25mm (1")

• Tamper Loop for added security

• Packaged 5 per bag

PAL-CE-WH

Surface Mount Contact with Tamper Loop• 3m (10ft.) jacketed leads

• Standard gap 28mm (1-1/8")

• Tamper Loop for added security

• Packaged 5 per bag

EMPS-50

Overhead Door Contact with Tamper Loop

• 62cm (24") armored cable

• Standard gap: 5.5cm (2")

• Complies with EN50131-1 (Grade 2, Class II)

• Rugged aluminum housing

• Tamper Loop for added security

• Package 1 per bag

EN50131-1

EMPS-70

20mm Diameter Recess Contact with Tamper Loop

• Complies with ENS0131-1 (Grade 2, Class II)

• 30cm (12") lead length

• Standard gap: 20mm (3/4")

• Tamper Loop for added security

ALSO AVAILABLE: EMPS-70W

– White

EMPS-70B – Brown

EN50131-1

Sensors TAMPER LOOP & HOLD UP SWITCHES

TAMPER LOOP

EMPS-75

20mm Diameter Recessed Contact with Terminals

• Complies with EN50131-1 (Grade 1, Class II)

• Standard gap: 20mm (3/4")

• Tamper Loop for added security

ALSO AVAILABLE: EMPS-75W

– White

EMPS-75B – Brown

EMPS-85

Surface Mount Contact with Terminals

• Complies with EN50131-1 (Grade 1, Class II)

• Standard gap: 20mm (3/4")

• Tamper Loop for added security

ALSO AVAILABLE: EMPS-85W

– White

EMPS-85B – Brown

EN50131-1

HOLD UP SWITCHES

270R

Hardwired Hold-Up Switch in plastic case

• Switch type: Plunger type DPDT

• Switch action: Selectable latching or momentary

• Switch rating: 0.2A @ 30VDC max.

• Connections: four position 45˚ screw terminal block for each output side with EOL resistor splicing terminals

• Operating temp: 14˚ F to 140˚ F

• Listed for UL636 Hold-up alarm units and systems

• Dimensions: 3-1/2" L x 2" W x 1-1/2" D

269SN

V-Plex Hold-Up Switch with stainless steel cover “polling loop only”

• Switch type: Plunger type DPDT

• Switch action: Selectable latching or momentary

• Switch rating: 0.2A @ 30VDC max.

• Connections: four position 45˚ screw terminal block for each output side with EOL resistor splicing terminals

• Operating temp: 14˚ F to 140˚ F

• Listed for UL636 Hold-up alarm units and systems

• Dimensions: 3-1/4" L x 2" W x 1-1/4" D

269R

Hold-Up Switch

• Double-pole double-throw contacts for multi-notifications

• Switch design provides totally silent operation

• Twin 45° screw terminals with EOL resistor splicing terminal

• Adhesive pads for temporary positioning prior to screw mounting

• Operating temp: 14˚ F to 140˚ F

• Listed for UL636 Hold-Up alarm units and systems

• Dimensions: 3-1/2" L x 2" W x 1-1/4" D

Sensors HOLD UP SWITCHES & DOOR CORDS

www.honeywell.com/security

HOLD UP SWITCHES

264

Money Clip

• Designed for installation in cash registers, cash boxes and at tellers’ windows

• When activated, sends an immediate signal to either the police or central office

• Single pole double-throw contacts

• Recessed screws provided for easy mounting

266

Foot Rail

• Reliable easy to operate foot activated hold-up device

• Housing made from rugged cast aluminum

• Designed to minimize the possibility of false alarms while permitting unobtrusive operation

• Indicator flag locks when alarm is tripped

268

Hold-Up Switch

• No chance of accidental tripping

• Smooth operation without danger of being detected

• Supplied with SPDT contacts for open or closed circuit systems

DOOR CORDS

Retractable Slimline Stretch Door Cord

• Solves the problem of carrying protective circuits off double hung-windows, sliding doors and other movable fixtures

ALSO AVAILABLE:

64WH

– White

64BR – Brown 64GY – Grey

Disconnecting Door Cord

• Ideal for protecting areas such as overhead garage and roll up doors

• Can be used as a contact or as a combination contact and circuit take-off

• Contains polarized plug and special stress relief chains which protect door cord wires

Sensors SMOKE DETECTORS, STROBES, & POWER SUPPLIES

STROBES

710

Strobe Warning Lights

• High intensity flashes for fast premises identification

• May be surface mounted or mounted on alarm bell housing

• 6 to 12 volts DC operation in single unit

• Weather resistant for outdoor use

ALSO AVAILABLE:

710CL

– Clear

710AM – Amber 710RD – Red 710BL – Blue

AD12612

Auxiliary Power Supply Battery Charger

• Provides 6 or 12 VDC (6 or 12 V operation)

• 1.2 Amps continuous output to power devices

• Factory preset at 13.6 VDC, with the jumper set to supply 12 VDC

• Transformer purchased separately

ALSO AVAILABLE:

1361/TF3

– transformer for 12 VDC

AD25624

Auxiliary Power Supply/ Battery Charger

• Provides 12 or 24 VDC (6 or 12 V operation)

• 1-1/2 Amps continuous output to power device

• Transformer purchased separately

ALSO AVAILABLE:

N1330

– transformer for 12 VDC

XF30 – transformer for 24 VDC

V-Plex SMOKE DETECTOR

5192SD/5192SDT

Smoke Detector

• Low profile design

• V-Plex addressable loop device

• Automatic maintenance reporting

• Available with integral heat sensor

• Simple two-wire installation

• Automatic drift compensation

POWER SUPPLIES

Sensors

TAMPER SWITCHES, BRACKETS AND PRE-WIRE PLUGS

www.honeywell.com/security

116

Plunger switch for closed circuit alarms (fits 3/4" (19mm) hole)

Angled mounting bracket for 39 and 7939 style contacts

Offset mounting bracket for 39 and 7939 style contacts

Shown with

contact

913WH

White 3/4" pre-wire plug

• ALSO AVAILABLE:

913BR

– brown

914WH

Steel door adapter for 3/8"recessed contacts

Shown with

contact

920

L-bracket for 950 magnetic contact

367

Foil contact switch in white

ALSO AVAILABLE:

367WH

– White

367BR – Brown

380

Spacer for 367

ALSO AVAILABLE:

367WH

– White

367BR – Brown

FOIL CONTACT SWITCHES

TAMPER SWITCHES, BRACKETS, PRE-WIRE PLUGS & FOIL CONTACT SWITCHES

28-2

Bracket for the 955WH tamper switch (mounts to alarm can)

955WH

Plunger switch for alarm cabinets

955WH and 28-2

112

Plunger switch for closed circuit alarms

Bracket for the 112 tamper switch

112 and 28

Honeywell DT640STC, DT660STC, DT6100STC, DT6360STC, DT7550C Brochure & Specs

Specifications and Main Features

Frequently Asked Questions

User Manual