Honeywell COMP230-P37-20, COMP230-P75-20, COMP230-1P1-20, COMP230-1P5-20, COMP230-2P2-20 PRODUCT DATA

...

COMP230-xxx-20 / COMP400-xxx-20

GENERAL

These variable frequency drives provide step less speed control for various applications:

 Pumps  Fans  Compressors  Conveyors, etc.

FEATURES

 Compact size  Flexible side-by-side mounting with screws or DIN-rail

as standard

 Single rating suitable for both pump and fan or

machine applications

 Maximum ambient temperature: +50  Integrated RFI-filters  Wide Input and Output connection possibilities  Configurable inputs and outputs  30s Start-Up Wizard  Easy “keypad – remote” change with 1 button  Parameter upload/download even without powering

the inverter with COMP-LOADER accessory

 Silent motor operation with 4 kHz switching

frequency

 Overtemperature ride-through  Power ride-through  Automatic restart  Integrated PI controller

SMARTDRIVE COMPACT INVERTERS

PRODUCT DATA

SPECIFICATIONS

Mains Connection

Input voltage U

380…480 Vac (-15…+10%), 3~

Input frequency 45…66 Hz Connection to mains Once per minute or less

Brake chopper Integrated as standard in

Motor Connection

Output voltage 0 - U Output current I

Starting current 2 x I Output frequency 0…320 Hz Frequency resolution 0.01 Hz

Control Characteristics

Control method Frequency Control U/f

Switching frequency 1.5...16 kHz;

Field weakening point 30…320 Hz Acceleration time 0.1…3000 sec Deceleration time 0.1…3000 sec Braking torque DC-brake: 30%*TN (without

Ambient Conditions

Operating temperature -10 °C (no frost)…+50 °C

NOTE: Two models with max.

Storage temperature -40 °C…+70 °C

208…240 Vac (-15…+10%), 1~

380…480 Vac products from

1.5 kW and up

in,

: Continuous output current

with max. +50 °C ambient temperature, overloadability

(1min/10min)

1.5 x I

2s/20s

Open Loop Sensorless Vector Control

default 4 kHz

brake resistor)

ambient: rated loadability I

operating temperature of +40 °C. See table on page 3.

SmartDrive COMPACT VARIABLE FREQUENCY DRIVES

Air quality

Chemical vapors IEC 721-3-3, unit in operation,

class 3C2

Mechanical particles IEC 721-3-3, unit in operation,

class 3S2

Altitude 100% load capacity (no derating)

up to 1000 m

1% derating for each 100 m

above 1000 m; max. 2000 m

Relative humidity 0…95% RH, non-condensing,

non-corrosive, no dripping water

Vibration 3...150 Hz EN50178, EN60068-2-6 Displacement amplitude 1(peak)

mm at 3...15.8 Hz

Max acceleration amplitude 1 g

at 15.8...150 Hz

Shock UPS Drop Test (for applicable EN50178, IEC 68-2-27 UPS weights) Storage and shipping: max 15 g,

11 ms (in package)

Enclosure class IP20

Electro Magnetic Compatibility (EMC)

Immunity Complies with EN50082-1, -2,

EN61800-3

Emissions

Standard product EN 61800-3 Category C2 (EMC-

level H)

With external RFI-filter EN 61800-3 Category C1 (EMC-

level C)

Safety

EN60204-1, EN 61800-5 CE UL508C UL, cUL

(see unit nameplate for more detailed approvals)

Control connections

Analog input voltage 0...+10V, Ri = 200kΩ (min),

Resolution 10 bit, accuracy ±1%, electrically isolated

Analog input current 0(4)…20 mA, Ri = 200Ω

differential resolution 0.1%, accuracy ±1%, electrically isolated

Digital inputs 6 positive logic; 0…+30 VDC

Voltage output for +24V, ±20%, max. load 50 mA digital inputs

Output reference voltage +10V, +3%, max. load 10 mA

Analog output 0(4)…20 mA; RL max. 500 Ω;

Digital outputs

Relays 2 programmable relay outputs (1

Open collector 1 open collector output with max.

resolution 16 bit; accuracy ±1%

NO/NC and 1 NO), Max.switching load: 250 Vac/2 A or 250 Vdc/0.4 A

load 48 V/50 mA

Protections

Overvoltage protection 875VDC in COMP400-xxx-20 437VDC in COMP230-xxx-20

Undervoltage protection 333VDC in COMP400-xxx-20 160VDC in COMP230-xxx-20

Earth-fault protection In case of earth fault in motor or

Unit overtemperature YES

protection Motor overload YES

protection

Motor stall protection

(fan/pump blocked)

Motor underload YES

protection (pump dry /

belt broken detection)

Short-circuit protection YES

of +24V and +10V

reference voltages Overcurrent protection Trip limit 4,0*I

motor cable, only the frequency converter is protected

YES

instantaneously

EN0B-0638GE51 R1009 2

SmartDrive COMPACT VARIABLE FREQUENCY DRIVES

MODELS

Mains voltage 230 V (208-240 V), 50/60 Hz, 1~in/3~out

Motor nominal

Inverter type

COMP230-P37-20 0.37 COMP230-P75-20 0.75 COMP230-1P1-20 1.1 COMP230-1P5-20 1.5 COMP230-2P2-20 *) 2.2 *) The unit has max. +40 °C ambient temperature

power 230V supply 50 °C P[kW]

Loadability

Rated

continuous

current I

[A]

2.4 3.6 IP20 MI1 66x157x98 0.55

3.7 5.6 IP20 MI2 90x195x102 0.7

4.8 7.2 IP20 MI2 90x195x102 0.7

7.0 10.5 IP20 MI2 90x195x102 0.7

9.6 14.4 IP20 MI3 100x251x109 1

50% overload

current

[A]

Enclosure

class

Mechanical

size

Mains voltage 400 V (380- 480 V), 50/60 Hz, 3~

Motor nominal

Inverter type

COMP400-P55-20 0.55 COMP400-P75-20 0.75 COMP400-1P1-20 1.1 COMP400-1P5-20 1,5 COMP400-2P2-20 2.2 COMP400-3P0-20 3.0 COMP400-4P0-20 4.0 COMP400-5P5-20 *) 5.5 *) The unit has max. +40 °C ambient temperature

power 400V supply 50 °C P[kW]

Loadability

Rated

continuous

current I

[A]

1.9 2.9 IP20 MI1 66x157x98 0.55

2.4 3.6 IP20 MI1 66x157x98 0.55

3.3 5.0 IP20 MI2 90x195x102 0.7

4.3 6.5 IP20 MI2 90x195x102 0.7

5.6 8.4 IP20 MI2 90x195x102 0.7

7.6 11.4 IP20 MI3 100x251x109 1

9.0 13.5 IP20 MI3 100x251x109 1

12.0 18.0 IP20 MI3 100x251x109 1

50% overload

current

[A]

Enclosure

class

Mechanical

size

PRODUCT IDENTIFICATION CODE

Dimensions

WxHxD

[mm]

Dimensions

WxHxD

[mm]

Weight

[kg]

Weight

[kg]

COMP 400 -1P1 -20

Enclosure classification 20 = IP20

Nominal power P75 = 0.75 kW 1P1 = 1.1 kW etc.

Supply voltage 230 = 230 Vac 1~ (208-240 Vac) 400 = 400 Vac 3~ (380-480 Vac)

Product range: COMP = SmartDrive Compact

Fig. 1. Product Identification Code

3 EN0B-0638GE51 R1009

+ 7 hidden pages