ENGLISH
Model 2605
Read this manual carefully and never store it inside the safe!
Operation & Installation Guide
Steel Waterproof Fire Safe
with Programmable Digital Lock
Welcome / Package Contents ........................................................................
Override Access Key / Install Batteries..........................................................
Low or Dead Batteries / Testing Digital Lock.................................................
Programming New User Code / Testing New User Code.............................
Closing Your Safe / Turn Sound On and Off / Motion Alarm Settings..........
Secure Lockout Period / Lost or Forgotten User Codes /
Care and Maintenance......................................................................................
Anchoring Your Safe.........................................................................................
Consumer Assistance..............................................................................
Ordering Additional Override Access Keys / Safe Identification Record /
Digital User Code Record.........................................................................
Warranty Information...............................................................................
For Your Protection
• Do not remove the Serial Number tag from the safe.
• Never Store Override Access Keys inside safe.
• Record all Safe Identication Numbers on Safe Identication Record (page 9).
• Save this manual and NEVER keep it inside the safe.
Page 1
Page 2
Page 3
Page 4
Page 5
Page 6
Page 7
Page 8
Page 9
Back
Cover
Index
The following list outlines the items and quantities of each included with your new safe. Please
carefully check the list to confirm all items have been received. If any item is missing, please contact
Consumer Assistance (See page 8 for contact information).
2605 Waterproof Steel Fire and Security Safe (1 ea.)
Operation Manual (1 ea.)
Override Access Keys (2 ea.)
Removable / Adjustable Shelf (1 ea.)
“AA” Batteries (4 ea.)
Mounting Hardware (1 set)
Your Honeywell Waterproof Steel Fire and Security Safe will provide years of safe and secure protection
for your valuables, important documents and other personal items. All Honeywell safes are designed
and built using the highest manufacturing standards to ensure maximum user satisfaction under a
variety of conditions. With proper care, your Honeywell safe will provide “Peace of Mind” for many
years to come.
Thank you and enjoy!
1
Attention: DO NOT RETURN SAFE TO STORE
If you are missing parts or have difficulty operating your safe, please contact our Consumer Assistance
Department by telephone. Store will not accept returned products without prior authorization. You must
first contact our Consumer Assistance Department. (See page 8 for contact information)
WELCOME
PACKAGE CONTENTS
1
2
3
4
5
6
7
8
9
0
#
*
For your convenience, we have included 4 “AA” batteries that provide the power for the electronic
locking system. These batteries must be installed before using your safe. The battery compartment is
located inside the safe on the lock cover panel.
1. Remove battery compartment cover and insert 4 “AA” batteries (included). Make sure that the
batteries are installed in the correct direction with regard to polarity (+ and -). (Figure 1 & Figure 2).
2. Proper installation of the batteries will cause the keypad to beep once, the red and green LED lights
will flash twice and the keypad back light will flash once (Figure 3).
3. Replace the battery cover (Figure 4).
4. Proceed to the “Testing Digital Lock” section on next page.
2
INSTALL BATTERIES
OVERRIDE ACCESS KEY
Your safe is equipped with an override access key which allows immediate access in case you forget
your user codes or the batteries need to be installed or replaced.
1. Remove override access rubber lock cover (Figure 1).
2. Insert the override access key into the lock until it stops (Figure 2).
3. With the key inserted turn clockwise to the right (Figure 3).
4. Turn the door handle upwards counterclockwise and pull the safe door open (Figure 4 & Figure 5).
Important: If the handle will not turn upwards counterclockwise, first turn the handle slightly back
to the left until it stops, then turn upwards counterclockwise again to open.
5. Remove override access key and store it in a safe place away from the safe. Replace the
cover over the key lock and proceed to “Install Batteries”.
Figure 1
Figure 1
Figure 2
Figure 2
Figure 3
Figure 3 Figure 4
Figure 4 Figure 5
Loading...