Page 1
Operation & Installation GuideOperation & Installation Guide
Operation & Installation Guide
Operation & Installation GuideOperation & Installation Guide
HM-HFS-COE
ENGLISHENGLISH
ENGLISH
ENGLISHENGLISH
Model
Model
ONE-HOUR
ONE-HOUR
COMBINATION
COMBINATION
FIRESAFES
FIRESAFES
20542054
2054
20542054
20842084
2084
20842084
with Key Lock
Read These Instructions Very Carefully!
Customer Service Customer Service
Customer Service
Customer Service Customer Service
1-800-223-8566 1-800-223-8566
1-800-223-8566
1-800-223-8566 1-800-223-8566
(USA & Canada)(USA & Canada)
(USA & Canada)
(USA & Canada)(USA & Canada)
Page 2
IndexIndex
Index
IndexIndex
Overview of Your Safe Overview of Your Safe
Overview of Your Safe
Overview of Your Safe Overview of Your Safe
Opening & Closing Your SafeOpening & Closing Your Safe
Opening & Closing Your Safe
Opening & Closing Your SafeOpening & Closing Your Safe
Opening The First TimeOpening The First Time
Opening The First Time
Opening The First TimeOpening The First Time
Your CombinationYour Combination
Your Combination
Your CombinationYour Combination
Opening With Combination DialOpening With Combination Dial
Opening With Combination Dial
Opening With Combination DialOpening With Combination Dial
Closing & Locking The SafeClosing & Locking The Safe
Closing & Locking The Safe
Closing & Locking The SafeClosing & Locking The Safe
Additional Features: ShelvesAdditional Features: Shelves
Additional Features: Shelves
Additional Features: ShelvesAdditional Features: Shelves
Additional Features: Bolt-Down Kit Additional Features: Bolt-Down Kit
Additional Features: Bolt-Down Kit
Additional Features: Bolt-Down Kit Additional Features: Bolt-Down Kit
Customer Support Customer Support
Customer Support
Customer Support Customer Support
Your Safe’s Unique Identification #’sYour Safe’s Unique Identification #’s
Your Safe’s Unique Identification #’s
Your Safe’s Unique Identification #’sYour Safe’s Unique Identification #’s
How To Contact UsHow To Contact Us
How To Contact Us
How To Contact UsHow To Contact Us
Ordering Replacement KeysOrdering Replacement Keys
Ordering Replacement Keys
Ordering Replacement KeysOrdering Replacement Keys
Recovering Lost CombinationsRecovering Lost Combinations
Recovering Lost Combinations
Recovering Lost CombinationsRecovering Lost Combinations
Use, Care and Maintenance Use, Care and Maintenance
Use, Care and Maintenance
Use, Care and Maintenance Use, Care and Maintenance
Limited Warranty Limited Warranty
Limited Warranty
Limited Warranty Limited Warranty
..................................................................................
.........................................
..................................................................................
......................................................
...........................
......................................................
..........................................................
.............................
..........................................................
....................................................................................................
..................................................
....................................................................................................
..........................................................
.............................
..........................................................
......................................................................................................
...................................................
......................................................................................................
..........................
.............
..........................
Page Page
Page
Page Page
Page Page
Page
Page Page
Page Page
Page
Page Page
Page Page
Page
Page Page
Page Page
Page
Page Page
Page Page
Page
Page Page
Page Page
Page
Page Page
11
1
11
22
2
22
33
3
33
44
4
44
66
6
66
88
8
88
99
9
99
For Your ProtectionFor Your Protection
For Your Protection
For Your ProtectionFor Your Protection
• Do not remove the serial number tag from the safe.
• Always store keys away from (AND NEVER INSIDE) safe.
• Record all safe identification #’s on I.D. Form (last page).
• Save this manual and NEVER keep it inside the safe.
Page 3
Overview of Your SafeOverview of Your Safe
Overview of Your Safe
Overview of Your SafeOverview of Your Safe
Congratulations!Congratulations!
Congratulations!
Congratulations!Congratulations!
Your new Honeywell Firesafe will provide years of safe and secure
storage for valuables and important documents. Your safe has been built with
the highest manufacturing standards to ensure maximum user satisfaction
under a variety of conditions. We have also created this comprehensive and
easy-to-use set of operation and installation instructions to give you complete
understanding and confidence in the use of your safe.
Package ContentsPackage Contents
Package Contents
Package ContentsPackage Contents
All ModelsAll Models
All Models
All ModelsAll Models
1 – Honeywell Firesafe
1 – Operation & Installation Guide
2 – Companion Entry Keys
Models 2054 (only)Models 2054 (only)
Models 2054 (only)
Models 2054 (only)Models 2054 (only)
1 – Bolt-Down Kit Including:
1 – Mounting Template
4 – Break-off Bolts
4 – Washers
Models 2054 (only)Models 2054 (only)
Models 2054 (only)
Models 2054 (only)Models 2054 (only)
1 – Removable Shelf
Models 2084 (only)Models 2084 (only)
Models 2084 (only)
Models 2084 (only)Models 2084 (only)
1 – Adjustable Shelf
4 – Shelf Support Clips
Important: Important:
Important:
Important: Important:
If you have difficulty opening the safe or any other
questions pertaining to proper use,
your safe to the store. Please Contact Customer Service
at 1-800-223-8566 (USA & Canada) for assistance.
DO NOT RETURN SAFE TO STOREDO NOT RETURN SAFE TO STORE
DO NOT RETURN SAFE TO STORE
DO NOT RETURN SAFE TO STOREDO NOT RETURN SAFE TO STORE
Home and Office Security Safes
DO NOT RETURNDO NOT RETURN
DO NOT RETURN
DO NOT RETURNDO NOT RETURN
11
1
11
Page 4
Opening & Closing Your SafeOpening & Closing Your Safe
Opening & Closing Your Safe
Opening & Closing Your SafeOpening & Closing Your Safe
Opening The First TimeOpening The First Time
Opening The First Time
Opening The First TimeOpening The First Time
The dial is preset to the fourth (last) number in the combination.
The safe door should open when you insert the Companion
Entry Key (round top), turn to the right and pull the door open.
The dial may move in transit, making it necessary to dial the
combination before opening the first time We recommend
trying the following combination procedure with safe door open first.
Your CombinationYour Combination
Your Combination
Your CombinationYour Combination
The combination for your safe can be found imprinted on the
cover cover
cover of this manual. It is a preset 4 number sequence that is unique to your
cover cover
safe and cannot be changed. It is recommended that you keep this manual in
a secure place, but
Opening With Combination DialOpening With Combination Dial
Opening With Combination Dial
Opening With Combination DialOpening With Combination Dial
1. Turn dial
2. Start the dial on
3. Turn dial
stop at number on fifth time around.
4. Turn dial
stop at number on third time around.
5. Turn dial
stop at number on the second time around.
6. Turn dial
7. Insert the key in the lock and turn key
NEVER STORE THIS MANUAL INSIDE THE SAFE!NEVER STORE THIS MANUAL INSIDE THE SAFE!
NEVER STORE THIS MANUAL INSIDE THE SAFE!
NEVER STORE THIS MANUAL INSIDE THE SAFE!NEVER STORE THIS MANUAL INSIDE THE SAFE!
RIGHT RIGHT
RIGHT (clockwise) three times to clear settings.
RIGHT RIGHT
00
0 (zero) to dial combination,
00
RIGHTRIGHT
RIGHT, passing first combination number
RIGHTRIGHT
LEFTLEFT
LEFT, passing second combination number
LEFTLEFT
RIGHTRIGHT
RIGHT, passing third combination number
RIGHTRIGHT
LEFTLEFT
LEFT, to the last combination number and STOP.
LEFTLEFT
RIGHT RIGHT
RIGHT to open.
RIGHT RIGHT
FOUR FOUR
FOUR (4) times and
FOUR FOUR
inside backinside back
inside back
inside backinside back
TWO TWO
TWO (2) times and
TWO TWO
ONE ONE
ONE (1) time and
ONE ONE
Closing & Locking The SafeClosing & Locking The Safe
Closing & Locking The Safe
Closing & Locking The SafeClosing & Locking The Safe
1. When open, the key is turned right (the unlocked position).
2. Close the safe door and turn the key to the left.
3. Remove the key and spin the combination dial twice.
Frequent Key-Only Access
When circumstances require frequent, quick and convenient access for
limited periods during the day, you may choose to keep the commbination
positioned on the last number and lock only the keylock. However, the safe
is not fully locked until spinning the dial.
22
2
22
Important: Important:
Important:
Important: Important:
The safe is
locked position and spinning the dial. For your security,
we recommend always locking both the combination dial
and key lock for the highest level of protection & security.
REDUCED LEVEL OF SECURITYREDUCED LEVEL OF SECURITY
REDUCED LEVEL OF SECURITY
REDUCED LEVEL OF SECURITYREDUCED LEVEL OF SECURITY
ONLY FULLY LOCKEDONLY FULLY LOCKED
ONLY FULLY LOCKED after turning key to the
ONLY FULLY LOCKEDONLY FULLY LOCKED
Page 5
Additional Features: Removable ShelvesAdditional Features: Removable Shelves
Additional Features: Removable Shelves
Additional Features: Removable ShelvesAdditional Features: Removable Shelves
ShelvesShelves
Shelves
ShelvesShelves
Removable Shelf Removable Shelf
Removable Shelf
Removable Shelf Removable Shelf
To remove the shelf, simply lift it up and tilt it on a sufficient angle to provide
clearance for removal.
Adjustable & Removable Shelves Adjustable & Removable Shelves
Adjustable & Removable Shelves
Adjustable & Removable Shelves Adjustable & Removable Shelves
These models are designed with 5 position adjustable shelves to allow greater
flexibility and further accommodate your particular security storage needs.
To Install:To Install:
To Install:
To Install:To Install:
Your Shelf and Shelf Support Clips have been
shipped inside your safe and wrapped for protection
from damage during shipping.
1. Remove Shelf and (4) Shelf Support Clips
from protective wrapping.
2. Determine the desired position of your shelf
To change the position of the shelf:To change the position of the shelf:
To change the position of the shelf:
To change the position of the shelf:To change the position of the shelf:
Simply remove the shelf and reposition the (4) shelf
support clips by sliding them up and out of the
support slots and reinstalling them into the new
positions. Then reinstall the shelf as described
above.
and note the corresponding Support Guide
Slots (2 on each side of interior walls) that
are best suited to support the shelf in that
position.
3. Install the (4) Shelf Support Clips in the same
position on all four support guides.
4. Install shelf into position by placing it inside
the safe (tilting if necessary) at a point
above the desired position.
5. Once inside, lower it into position until
resting on Shelf Support Clips.
((
Model 2054 onlyModel 2054 only
(
Model 2054 only
((
Model 2054 onlyModel 2054 only
))
)
))
((
Model 2084 onlyModel 2084 only
(
Model 2084 only
((
Model 2084 onlyModel 2084 only
))
)
))
SUPPORT
GUIDES
Important: Important:
Important:
Important: Important:
If you remove the shelf, it is strongly
recommended that you
DISCARDDISCARD
DISCARD
DISCARDDISCARD
flat in the bottom of the safe to
assure full flexibility in the future.
REMOVING SHELFREMOVING SHELF
REMOVING SHELF
REMOVING SHELFREMOVING SHELF
DO NOTDO NOT
DO NOT
DO NOTDO NOT
it. You may lay the shelf
Home and Office Security Safes
33
3
33
Page 6
Additional Features: Bolt-Down KitAdditional Features: Bolt-Down Kit
Additional Features: Bolt-Down Kit
Additional Features: Bolt-Down KitAdditional Features: Bolt-Down Kit
Models 2054 (only)Models 2054 (only)
Models 2054 (only)
Models 2054 (only)Models 2054 (only)
Installing Your SafeInstalling Your Safe
Installing Your Safe
Installing Your SafeInstalling Your Safe
Certain models include a Bolt-Down kit with break-off bolts and a mounting
template for permanent mounting to a flat surface. Once the safe is installed
using the break-off bolts, it is permanent and cannot be easily removed.
Tools RequiredTools Required
Tools Required
Tools RequiredTools Required
4 – Break-off Bolts (Supplied)
4 – Washers(Supplied)
1 – Mounting Template (Supplied)
1 – Drill
1 – Screwdriver
44
4
44
Important: Important:
Important:
Important: Important:
Many consumers prefer to bolt their safe to the floor to
increase protection from theft and resistance to tipping. If
your safe was manufactured with bolt down holes predrilled in the floor of the safe, bolting your safe to the
floor may provide additional theft deterrence.
If you have
this, or are uncomfortable using the tools necessary to
complete this project, please check with your local retailer,
home center, or independent contractor.
SECURING TO FLOORSECURING TO FLOOR
SECURING TO FLOOR
SECURING TO FLOORSECURING TO FLOOR
ANY QUESTIONSANY QUESTIONS
ANY QUESTIONS
ANY QUESTIONSANY QUESTIONS
about how to accomplish
Page 7
Additional Features: Bolt-Down KitAdditional Features: Bolt-Down Kit
Additional Features: Bolt-Down Kit
Additional Features: Bolt-Down KitAdditional Features: Bolt-Down Kit
Installation ProcedureInstallation Procedure
Installation Procedure
Installation ProcedureInstallation Procedure
1. Choose a mounting location that is easily
accessible from both above and below.
2. Carefully position the template on the location
that you want to mount the safe.
3. Create the guide marks by pressing a sharp
tool through the circles at the four corners of
the template and into the mounting location.
4. Drill a hole (the diameter of the break-off bolt
shaft) through each guide mark.
Models 2054 (only)Models 2054 (only)
Models 2054 (only)
Models 2054 (only)Models 2054 (only)
Important: Important:
Important:
Important: Important:
Do not drill into the feet, bottom or
any other part of safe! Doing so will
ELIMINATE THE FIRE PROTECTIONELIMINATE THE FIRE PROTECTION
ELIMINATE THE FIRE PROTECTION
ELIMINATE THE FIRE PROTECTIONELIMINATE THE FIRE PROTECTION
that has been designed into your safe
and invalidate all stated warranties.
5. Before attaching the safe, you should check
carefully that the 4 holes you have drilled
match up precisely with the holes that have
been pre-drilled in the bottom of the safe.
Note: On certain models, It may be necessary
to remove the rubber foot pads that are
screwed into the bolt-down holes at the
factory.
6. Once you have confirmed that the holes are
aligned and in the location you desire, install
the break-off bolts and washers from
underneath the mounting location (through
the furniture or shelf), and into the pre-drilled
holes in the safe.
7. Turn bolts until the screw heads break off.
DON’T DRILL SAFEDON’T DRILL SAFE
DON’T DRILL SAFE
DON’T DRILL SAFEDON’T DRILL SAFE
Home and Office Security Safes
55
5
55
Page 8
Customer SupportCustomer Support
Customer Support
Customer SupportCustomer Support
Your Safe’s Unique Identification NumbersYour Safe’s Unique Identification Numbers
Your Safe’s Unique Identification Numbers
Your Safe’s Unique Identification NumbersYour Safe’s Unique Identification Numbers
When contacting Customer Service, you should be prepared to supply some
important information that specifically identifies your safe. This information is
extremely important to assuring prompt and accurate assistance.
It is strongly recommended that you identify and record the following
information in the “Identification Record” form located on the inside back
cover of this manual.
Model #Model #
Model #
Model #Model #
The Honeywell Home and Office Security Safes product line consists of many
different models, each identified by a specific model #. Every model is
manufactured with unique capabilities and features that may require specific
solutions to a variety of difficulties that occasionally occur.
Serial #Serial #
Serial #
Serial #Serial #
Each Individual safe is assigned a unique serial # when it is manufactured.
This # allows our Customer Service Specialists to define many unique factors
that will enable them to provide you with the best assistance.
Key #Key #
Key #
Key #Key #
The key # is necessary to identify the specific configuration of the key and lock
cylinder components of your safe. If a key becomes damaged or misplaced,
the key # is absolutely required to provide you with a replacement key.
Locating Serial # & Model #Locating Serial # & Model #
Locating Serial # & Model #
Locating Serial # & Model #Locating Serial # & Model #
Most Honeywell safes include a metallic or gray tag (with numbers and or
letters) affixed to one of the external surfaces (most often on front or right
side). This tag contains the serial # and selected models include a similar tag
containing the model #. If your safe does not include a model # tag and you
have not discarded the package, you can find the model # located near the
bottom of the front label.
Locating Key #Locating Key #
Locating Key #
Locating Key #Locating Key #
The key numbers are engraved on the keys and around the lock cylinder.
66
6
66
Important: Important:
Important:
Important: Important:
PLEASEPLEASE
PLEASE
PLEASEPLEASE
other identification tags or warning labels from the safe.
You may need these numbers for future reference.
DO NOT REMOVE TAGSDO NOT REMOVE TAGS
DO NOT REMOVE TAGS
DO NOT REMOVE TAGSDO NOT REMOVE TAGS
do not remove the serial # or model # tags or any
Page 9
How to Contact UsHow to Contact Us
How to Contact Us
How to Contact UsHow to Contact Us
Customer SupportCustomer Support
Customer Support
Customer SupportCustomer Support
Phone:Phone:
Phone:
Phone:Phone:
Monday through Friday, 8:00 am to 4:00 pm Pacific Standard Time
Email:Email:
Email:
Email:Email:
Mail:Mail:
Mail:
Mail:Mail:
Internet: Internet:
Internet:
Internet: Internet:
Ordering Replacement KeysOrdering Replacement Keys
Ordering Replacement Keys
Ordering Replacement KeysOrdering Replacement Keys
1-800-223-85661-800-223-8566
1-800-223-8566
1-800-223-85661-800-223-8566
CustomerService@HoneywellSafes.com CustomerService@HoneywellSafes.com
CustomerService@HoneywellSafes.com.
CustomerService@HoneywellSafes.com CustomerService@HoneywellSafes.com
In addition to the required information regarding your safe, you must
include the best time and proper telephone number to reach you during
our normal Customer Service hours. You should receive a reply response
via e-mail or phone within 24 business hours or the following business day.
Attn: Customer Service Dept.Attn: Customer Service Dept.
Attn: Customer Service Dept.
Attn: Customer Service Dept.Attn: Customer Service Dept.
SISCOSISCO
SISCO
SISCOSISCO
2835 E. Ana Street2835 E. Ana Street
2835 E. Ana Street
2835 E. Ana Street2835 E. Ana Street
Rancho Dominguez, CA 90221Rancho Dominguez, CA 90221
Rancho Dominguez, CA 90221
Rancho Dominguez, CA 90221Rancho Dominguez, CA 90221
www.HoneywellSafes.comwww.HoneywellSafes.com
www.HoneywellSafes.com
www.HoneywellSafes.comwww.HoneywellSafes.com
If a key becomes misplaced or you would like additional keys, you may
conveniently purchase them from our Customer Service department.
You must supply the following information to assure accurate processing:
Name / Address / TelephoneName / Address / Telephone
•
Name / Address / Telephone
Name / Address / TelephoneName / Address / Telephone
• Safe model number / Serial number• Safe model number / Serial number
• Safe model number / Serial number
• Safe model number / Serial number• Safe model number / Serial number
• Type of keys requested (Companion or Override)• Type of keys requested (Companion or Override)
• Type of keys requested (Companion or Override)
• Type of keys requested (Companion or Override)• Type of keys requested (Companion or Override)
• Number of keys requested• Number of keys requested
• Number of keys requested
• Number of keys requested• Number of keys requested
• Key number (located on the lock)• Key number (located on the lock)
• Key number (located on the lock)
• Key number (located on the lock)• Key number (located on the lock)
Payment and DeliveryPayment and Delivery
Payment and Delivery
Payment and DeliveryPayment and Delivery
In the US, replacement keys are available for $6.95 each and credit card
orders are accepted by telephone and through our website. Checks or
money orders are required for orders received by mail and should be made
payable to “SISCO”. Orders paid via money order or credit card typically
ship within 72 hours. Orders placed with a personal or business check
typically ship within 14 days.
Recovering Lost CombinationsRecovering Lost Combinations
Recovering Lost Combinations
Recovering Lost CombinationsRecovering Lost Combinations
The following information is needed to provide you with your combination:
Name / Address / TelephoneName / Address / Telephone
•
Name / Address / Telephone
Name / Address / TelephoneName / Address / Telephone
• Safe model number / Serial number• Safe model number / Serial number
• Safe model number / Serial number
• Safe model number / Serial number• Safe model number / Serial number
• Key number (located on the lock)• Key number (located on the lock)
• Key number (located on the lock)
• Key number (located on the lock)• Key number (located on the lock)
NOTE:NOTE:
NOTE: If records are not on site, it may take up to 3 business days to respond.
NOTE:NOTE:
Terms subject to change without notice.
Home and Office Security Safes
77
7
77
Page 10
Use, Care & MaintenanceUse, Care & Maintenance
Use, Care & Maintenance
Use, Care & MaintenanceUse, Care & Maintenance
Appropriate Use of Your SafeAppropriate Use of Your Safe
Appropriate Use of Your Safe
Appropriate Use of Your SafeAppropriate Use of Your Safe
Honeywell fire safes protect paper records and many other valuables.
Testing shows that the interior temperature remains below 350°F (177°C)
for 1 or 2 hours (depending on model) during a fire up to 1700°F (927°C)
when used properly. Your safe must be closed and latched in order to
properly protect its contents from fire.
Your safe is guaranteed not to develop mildew from moisture originating in
the safe’s insulating material for five years. However, if the safe is stored in
an area of high moisture content (such as near the ocean or in a tropical
climate), moisture from the environment may become trapped inside the
safe. If this applies to you, it is recommended that you open the safe on a
regular basis to promote air circulation.
Safe Safe
Safe
Safe Safe
When properly maintained, your safe will continue to provide security and
protection of your valuables and important documents for many years to
come. In order to ensure optimum performance of your safe, please follow
these simple precautions:
Care and MaintenanceCare and Maintenance
Care and Maintenance
Care and MaintenanceCare and Maintenance
Clean Hands - Clean Hands -
Clean Hands - Do not attempt to dial your combination if your
Clean Hands - Clean Hands -
hands have excessive dirt, debris, or liquids on them. Under
normal circumstances, it is not necessary to wash your hands
before using the safe.
Clean Safe - Clean Safe -
Clean Safe - To clean the outside surface of your safe, it is
Clean Safe - Clean Safe -
recommended that you use a mild cleaner (i.e. window cleaner)
to avoid scratching or discoloring the surface. Do not use
abrasive cleansers.
88
8
88
Page 11
Safe Identification RecordSafe Identification Record
Safe Identification Record
Safe Identification RecordSafe Identification Record
Model #
Serial #
Key #
4 Number Combination:
RIGHT
FOUR (4) Turns
and CONTINUE to:
LEFT TWO (2) Turns
and CONTINUE to:
RIGHT ONE (1) Turn
and CONTINUE to:
LEFT to:
Home and Office Security Safes
Page 12
Limited WarrantyLimited Warranty
Limited Warranty
Limited WarrantyLimited Warranty
LIFETIME AFTER FIRE REPLACEMENT GUARANTEELIFETIME AFTER FIRE REPLACEMENT GUARANTEE
LIFETIME AFTER FIRE REPLACEMENT GUARANTEE
LIFETIME AFTER FIRE REPLACEMENT GUARANTEELIFETIME AFTER FIRE REPLACEMENT GUARANTEE
If your Honeywell Firesafe is ever damaged by a fire, SISCO will replace it
with a comparable model at no charge to the consumer. A photo of the
damaged safe and a Fire Department report will be required as proof of
loss. Freight on the replacement unit is not included in the guarantee and
must be paid by the user.
LIMITED WARRANTYLIMITED WARRANTY
LIMITED WARRANTY
LIMITED WARRANTYLIMITED WARRANTY
If your Honeywell safe fails to operate because of a manufacturing defect,
any time up to five (5) years from the date of original purchase, we will, at
our discretion, repair or replace the unit at no charge to the original owner
provided you return the product, shipping prepaid, to SISCO, or to a service
center or locksmith of our choice. Prior authorization must be obtained
from SISCO in advance.
WHAT IS NOT COVEREDWHAT IS NOT COVERED
WHAT IS NOT COVERED
WHAT IS NOT COVEREDWHAT IS NOT COVERED
This warranty does not apply if the product has been damaged by
improper installation, neglect, accident, misuse, exposure to extremes of
heat or humidity, terrorism, war, acts of God, or as a result of service or
modification by other than an authorized Honeywell service center. Sisco is
not responsible for any costs associated with removing or installing this
product. SISCO is also not responsible for damage or loss of the contents of
the safe nor for the unauthorized removal of contents.
This warranty does not apply to the finish of any metal portions of the
product. No other expressed warranty is given. The repair or replacement
of the product is your exclusive remedy. Any implied warranty of salability
or fitness is limited to the duration of this written warranty. Some states do
not allow limitations on how long an implied warranty lasts, so the above
limitations may not apply to you. In no event shall SISCO be liable for
consequential or incidental damages. Some states do not allow the
exclusion or limitation of incidental or consequential damages, so the
above limitation or exclusion may not apply to you. This warranty gives you
specific rights and you may also have other rights which vary from state to
state.
The Honeywell trademark for Home/ Office Safes is used with permission.
Honeywell Safes are distributed exclusively by SISCO. Honeywell makes no
representations or warranties with respect to this product or service, The
Honeywell Trademark is used under license from Honeywell Intellectual
Properties Inc. by SISCO.
Home and Office Security Safes
Loading...