Honda VT 700, VT 750 Service Manual 15
Specifications and Main Features
- Shaft runout value: 0.2 mm (0.01 in)
- Front wheel rim faces runout:
- Radial: up to 0.3 mm (0.01 in) and 2.0 mm (0.08 in)
- Axial: 0.3 mm (0.01 in) maximum, 2.0 mm (0.08 in)
- Play in Wheel bearing: 0.03mm (0.001 in)
- Fork spring free length: 465.6 mm (18.33 in) / 456.3 mm (18.0 in)
- Fork tube out of roundness: 0.2 mm (0.01 in)
- Front forks fluid reserve: 467.5—472.5 cc (15.82—15.99ozs)
- Front fork air pressure: 0-6 psi O-40 kPa O-0.4kg/cm²
- Torque Limits for other items in N-m, kg-m, ft-lb:
- Handlebar upper holder: 20—30 N-m (2.0—3.0 kg-m 14—22 ft-lb)
- Caliper mounting bolt: 30—40 N-m (3.0—4.0 kg-m 22—29 ft-lb)
- Front axle: 55 to 65 N-m (5.5 to 6.5 kg-m, 40 to 47 foot-pounds)
- Axle pinch bolt: 18—28 N-m (1.8 to 2.8 Kg-m 13 to 20 Ft-lb)
- Front fork socket bolt: 15—25 N-m (1.5 to 2.5 Kg-m 11 to 18 Ft-lb)
- Fork tube cap: 15—30 N-m (1.5 to 3.0 Kg-m 11 to 22 ft-lb)
- Steering stem nut: 80 to 120 N-m (8.0 to 12.0 Kg-m, 58 to 87 Ib-ft)
- Brake disc: 35 to 40 N-m (3.5 to 4.0 kg-m 25 to 29 ft-lb)
- Front fork tople pinch bolt: 9 to 13 N-m (0.9 to 1.3 Kg-m 7 to 9 ft-lb)
- Front fork bottom pinch bolt: 45 55 N-m 4.5 5.5 kg m, 33 40 ft lb
- Front fork brace socket bolt: 18 28 N-m 1.8 2.8 kg m, 13 20 ft lb
Frequently Asked Questions
- Front fork fluid capacity?
The front fork fluid capacity is 467.5 472.5 cc 15.82 15.99 ozs.
- Air pressure for front fork?
The recommended air pressure for the front fork is 0 6 psi O 40 kPa O 0.4 kg cm.
- What should I do if the steering is hard to turn?
It could be a tight steering bearing adjustment nut, bad/damaged steering stem bearings or a possibility of low tire inflation.
- What is the wheel bearing play service limit?
The wheel bearing play service limit is 0.03 mm 0.001 in.
- How do I measure the front wheel rim runout?
To measure the front wheel rim runout, the wheel is placed in a truing stand and spun while using a dial indicator to read the runout.
User Manual
Loading...