Honda CBF250NA, CB250R, CBF300NA, CB300R Owner's Manual
CBF250NA/300NA / CB250R/300R
OWNER’S MANUAL
CBF250NA/300NA / CB250R/300R
32K0AC01
00X32-K0A-C010
XXX.XXXX.XX.K
PRINTED IN XXXXX
EN
This manual should be considered a permanent part of the
motorcycle and should remain with the motorcycle when it is resold.
This publication includes the latest production information available
before printing. Honda Motor Co., Ltd. reserves the right to make
changes at any time without notice and without incurring any
obligation.
No part of this publication may be reproduced without written
permission.
The vehicle pictured in this owner’s manual may not match your
actual vehicle.
© 2018 Honda Motor Co., Ltd.
20180116165849_32K0AC000_eng_BOOK Page 1 Tuesday, January 16 2018 17:05:27 JST
Welcome
Congratulations on your purchase of a new
Honda motorcycle. Your selection of a
Honda makes you part of a worldwide family
of satisfied customers who appreciate
Honda's reputation for building quality into
every product.
To ensure your safety and riding pleasure:
●
Read this owner's manual carefully.
●
Follow all recommendations and
procedures contained in this manual.
● Pay close attention to safety messages
contained in this manual and on the
motorcycle.
● The following codes in this manual
indicate each country.
● The illustrations here in are based on the
CBF300NA ED type.
Country Codes
Code
CBF300NA
Country
ED European direct sales
CBF250NA
TU Turkey
*The specifications may vary with each locale.
20180116165849_32K0AC000_eng_BOOK Page 2 Tuesday, January 16 2018 17:05:27 JST
A Few Words About Safety
Your safety, and the safety of others, is very
important. Operating this motorcycle safely is
an important responsibility.
To help you make informed decisions about
safety, we have provided operating
procedures and other information on safety
labels and in this manual. This information
alerts you to potential hazards that could
hurt you or others.
Of course, it is not practical or possible to
warn you about all hazards associated with
operating or maintaining a motorcycle. You
must use your own good judgement.
You will find important safety information in a
variety of forms, including:
● Safety labels on the motorcycle
●
Safety Messages preceded by a safety alert
symbol
and one of three signal words:
DANGER, WARNING, or CAUTION.
These signal words mean:
3DANGER
You WILL be KILLED or SERIOUSLY
HURT if you don’t follow instructions.
3WARNING
You CAN be KILLED or SERIOUSLY
HURT if you don’t follow instructions.
3CAUTION
You CAN be HURT if you don’t follow
instructions.
Other important information is
provided under the following titles:
NOTICE
Information to help you avoid
damage to your motorcycle,
other property, or the
environment.
20180116165849_32K0AC000_eng_BOOK Page 3 Tuesday, January 16 2018 17:05:27 JST
Contents
Motorcycle Safety P. 2
Operation Guide P. 16
Maintenance P. 49
Troubleshooting P. 99
Information P. 117
Specifications P. 129
Index P. 132
20180116165849_32K0AC000_eng_BOOK Page 4 Tuesday, January 16 2018 17:05:27 JST
Safety Guidelines................................................. P. 3
Image Labels......................................................... P. 6
Safety Precautions............................................. P. 10
Riding Precautions ............................................ P. 11
Accessories & Modifications........................... P. 14
Loading ................................................................ P. 15
20180116165849_32K0AC000_eng_BOOK Page 5 Tuesday, January 16 2018 17:05:27 JST
This section contains important information for safe riding of your motorcycle.
Please read this section carefully.
Motorcycle Safety
Safety Guidelines
Follow these guidelines to enhance your safety:
● Perform all routine and regular inspections
specified in this manual.
●
Stop the engine and keep sparks and flame
away before filling the fuel tank.
●
Do not run the engine in enclosed or partly
enclosed areas. Carbon monoxide in
exhaust gases is toxic and can kill you.
Always Wear a Helmet
It's a proven fact: helmets and protective
apparel significantly reduce the number and
severity of head and other injuries. So always
wear an approved motorcycle helmet and
protective apparel.
2 P. 10
Before Riding
Make sure that you are physically fit, mentally
focused and free of alcohol and drugs. Check
that you and your passenger are both wearing
an approved motorcycle helmet and protective
apparel. Instruct your passenger on holding
onto the seat strap or your waist, leaning with
you in turns, and keeping their feet on the
footpegs, even when the motorcycle is stopped.
Take Time to Learn & Practice
Even if you have ridden other motorcycles,
practice riding in a safe area to become familiar
with how this motorcycle works and handles,
and to become accustomed to the motorcycle's
size and weight.
20180116165849_32K0AC000_eng_BOOK Page 6 Tuesday, January 16 2018 17:05:27 JST
Safety Guidelines
Motorcycle Safety
3
Continued
Ride Defensively
Always pay attention to other vehicles around
you, and do not assume that other drivers see
you. Be prepared to stop quickly or perform an
evasive maneuver.
Make Yourself Easy to See
Make yourself more visible, especially at night,
by wearing bright reflective clothing, positioning
yourself so other drivers can see you, signaling
before turning or changing lanes, and using
your horn when necessary.
Ride within Your Limits
Never ride beyond your personal abilities or
faster than conditions warrant. Fatigue and
inattention can impair your ability to use good
judgement and ride safely.
Don't Drink and Ride
Alcohol and riding don't mix. Even one alcoholic
drink can reduce your ability to respond to
changing conditions, and your reaction time
gets worse with every additional drink. Don't
drink and ride, and don't let your friends drink
and ride either.
Keep Your Honda in Safe Condition
It's important to keep your motorcycle properly
maintained and in safe riding condition.
Inspect your motorcycle before every ride and
perform all recommended maintenance. Never
exceed load limits (
2 P. 15), and do not modify
your motorcycle or install accessories that
would make your motorcycle unsafe (
2 P. 14).
20180116165849_32K0AC000_eng_BOOK Page 7 Tuesday, January 16 2018 17:05:27 JST
Safety Guidelines
Motorcycle Safety
4
If You are Involved in a Crash
Personal safety is your first priority. If you or
anyone else has been injured, take time to
assess the severity of the injuries and whether it
is safe to continue riding. Call for emergency
assistance if needed. Also follow applicable laws
and regulations if another person or vehicle is
involved in the crash.
If you decide to continue riding, first turn the
ignition switch to the
(Off) position, and
evaluate the condition of your motorcycle.
Inspect for fluid leaks, check the tightness of
critical nuts and bolts, and check the handlebar,
control levers, brakes, and wheels. Ride slowly
and cautiously.
Your motorcycle may have suffered damage
that is not immediately apparent. Have your
motorcycle thoroughly checked at a qualified
service facility as soon as possible.
Carbon Monoxide Hazard
Exhaust contains poisonous carbon monoxide, a
colourless, odorless gas. Breathing carbon
monoxide can cause loss of consciousness and
may lead to death.
If you run the engine in confined or even partly
enclosed area, the air you breathe could contain
a dangerous amount of carbon monoxide.
Never run your motorcycle inside a garage or
other enclosure.
3WARNING
Running the engine of your motorcycle
while in an enclosed or even partially
enclosed area can cause a rapid build-
up of toxic carbon monoxide gas.
Breathing this colourless, odorless gas
can quickly cause unconsciousness and
lead to death.
Only run your motorcycle's engine
when it is located in a well ventilated
area outdoors.
20180116165849_32K0AC000_eng_BOOK Page 8 Tuesday, January 16 2018 17:05:27 JST
Safety Guidelines
Motorcycle Safety
5
Image Labels
The following pages describe the label
meanings. Some labels warn you of
potential hazards that could cause serious
injury. Others provide important safety
information. Read this information carefully
and don't remove the labels.
If a label comes off or becomes hard to
read, contact your dealer for a replacement.
There is a specific symbol on each label.
The meanings of each symbol and label are
as follows.
Read instructions contained in Owner's
Manual carefully.
Read instructions contained in Shop Manual
carefully. In the interest of safety, take the
motorcycle to be serviced only by your
dealer.
DANGER (with RED background)
You WILL be KILLED or SERIOUSLY HURT if
you don't follow instructions.
WARNING (with ORANGE background)
You CAN be KILLED or SERIOUSLY HURT if
you don't follow instructions.
CAUTION (with YELLOW background)
You CAN be HURT if you don't follow
instructions.
20180116165849_32K0AC000_eng_BOOK Page 9 Tuesday, January 16 2018 17:05:27 JST
Image Labels
Motorcycle Safety
6
BATTERY LABEL
DANGER
• Keep flame and spark away from the battery.
Battery produce explosive gas that can cause
explosion.
•
Wear the eye protection and rubber gloves when
handling the battery, or you can get burned or
lose your eyesight by the battery electrolyte.
•
Do not allow children and other people to touch a
battery unless they understand proper handling
and hazards of the battery very well.
•
Handle the battery electrolyte with extreme care as
it contains dilute sulfuric acid. Contact with your
skin or eyes can burn you or cause loss of your
eyesight.
•
Read this manual carefully and understand it
before handling the battery. Neglect of the
instructions can cause personal injury and damage
to the motorcycle.
•
Do not use a battery with the electrolyte at or
below the lower level mark. It can explode causing
serious injury.
20180116165849_32K0AC000_eng_BOOK Page 10 Tuesday, January 16 2018 17:05:27 JST
Image Labels
Motorcycle Safety
7
Continued
RADIATOR CAP LABEL
DANGER
NEVER OPEN WHEN HOT.
Hot coolant will scald you.
Relief pressure valve begins to open at 1.1 kgf/cm
2
.
ACCESSORIES AND LOADING WARNING LABEL
WARNING
ACCESSORIES AND LOADING
• The safety stability and handling of this motorcycle may be
affected by the addition of accessories and luggage.
• Read carefully the instructions contained in user's manual and
installation guide before installing any accessory.
• The total weight of accessories and luggage added to rider's and
passenger's weight should not exceed 180 kg (397 lb), which is
the maximum weight capacity.
•
The luggage weight must not exceed 8 kg (18 lb) under any
circumstances.
• The fitting of large fork-mounted or large handlebar mounted
fairing is not recommended.
20180116165849_32K0AC000_eng_BOOK Page 11 Tuesday, January 16 2018 17:05:27 JST
Image Labels
Motorcycle Safety
8
REAR CUSHION LABEL
GAS FILLED
Do not open. Do not heat.
TYRE INFORMATION & DRIVE CHAIN LABEL
Cold tyre pressure:
[Driver only]
Front
Rear
200 kPa (2.00 kgf/cm
2
, 29 psi)
225 kPa (2.25 kgf/cm
2
, 33 psi)
[Driver and passenger]
Front
Rear
200 kPa (2.00 kgf/cm
2
, 29 psi)
225 kPa (2.25 kgf/cm
2
, 33 psi)
Keep chain adjusted and lubricated.
Freeplay 30 - 40 mm (1.2 - 1.6 in)
SAFETY REMINDER LABEL
For your protection, always wear helmet, protective apparel.
FUEL LABEL
Unleaded petrol only
ETHANOL up to 10 % by volume
20180706091416_32K0AC000_eng_BOOK Page 12 Friday, July 06 2018 09:23:27 JST
Image Labels
Motorcycle Safety
9
or
Safety Precautions
● Ride cautiously and keep your hands on the
handlebar and feet on the footpegs.
●
Keep passenger's hands onto the seat strap
or your waist, passenger's feet on the
footpegs while riding.
●
Always consider the safety of your
passenger, as well as other drivers and
riders.
Protective Apparel
Make sure that you and any passenger are
wearing an approved motorcycle helmet, eye
protection, and high-visibility protective
clothing. Ride defensively in response to
weather and road conditions.
#
Helmet
Safety-standard certified, high-visibility, correct
size for your head
●
Must fit comfortably but securely, with the
chin strap fastened.
● Face shield with unobstructed field of vision
or other approved eye protection
3WARNING
Not wearing a helmet increases the
chance of serious injury or death in a
crash.
Make sure that you and any passenger
always wear an approved helmet and
protective apparel.
#
Gloves
Full-finger leather gloves with high abrasion
resistance
#
Boots or Riding Shoes
Sturdy boots with non-slip soles and ankle
protection
#
Jacket and Trousers
Protective, highly visible, long-sleeved jacket and
durable trousers for riding (or a protective suit)
20180116165849_32K0AC000_eng_BOOK Page 13 Tuesday, January 16 2018 17:05:27 JST
Safety Precautions
Motorcycle Safety
10
Riding Precautions
Running-in Period
During the first 500 km (300 miles) of running,
follow these guidelines to ensure your
motorcycle's future reliability and performance.
● Avoid full-throttle starts and rapid
acceleration.
● Avoid hard braking and rapid down-shifts.
● Ride conservatively.
Brakes
Observe the following guidelines:
● Avoid excessively hard braking and
downshifting.
u
Sudden braking can reduce the
motorcycle's stability.
u
Where possible, reduce speed before
turning; otherwise you risk sliding out.
● Exercise caution on low traction surfaces.
u
The tyres slip more easily on such
surfaces and braking distances are
longer.
●
Avoid continuous braking.
u
Repeated braking, such as when
descending long, steep slopes can
seriously overheat the brakes, reducing
their effectiveness. Use engine braking
with intermittent use of the brakes to
reduce speed.
●
For full braking effectiveness, operate both
the front and rear brakes together.
20180116165849_32K0AC000_eng_BOOK Page 14 Tuesday, January 16 2018 17:05:27 JST
Riding Precautions
Motorcycle Safety
11
Continued
#
Anti-lock Brake System (ABS)
This model is equipped with an Anti-lock Brake
System (ABS) designed to help prevent the
brakes from locking up during hard braking.
The ABS functions with information provided by
the IMU (Inertia Measurement Unit).
●
ABS does not reduce braking distance. In
certain circumstances, ABS may result in a
longer stopping distance.
●
ABS does not function at speeds below 10
km/h (6 mph).
●
The brake lever and pedal may recoil slightly
when applying the brakes. This is normal.
● Always use the recommended front/rear
tyres and sprockets to ensure correct ABS
operation.
#
Engine Braking
Engine braking helps slow your motorcycle
down when you release the throttle. For further
slowing action, downshift to a lower gear. Use
engine braking with intermittent use of the
brakes to reduce speed when descending long,
steep slopes.
#
Wet or Rainy Conditions
Road surfaces are slippery when wet, and wet
brakes further reduce braking efficiency.
Exercise extra caution when braking in wet
conditions.
If the brakes get wet, apply the brakes while
riding at low speed to help them dry.
20180116165849_32K0AC000_eng_BOOK Page 15 Tuesday, January 16 2018 17:05:27 JST
Riding Precautions
Motorcycle Safety
12
Parking
● Park on a firm, level surface.
● If you must park on a slight incline or loose
surface, park so that the motorcycle cannot
move or fall over.
●
Make sure that high-temperature parts
cannot come into contact with flammable
materials.
●
Do not touch the engine, muffler, brakes
and other high-temperature parts until they
cool down.
●
To reduce the likelihood of theft, always lock
the handlebar and remove the key when
leaving the motorcycle unattended.
Use of an anti-theft device is also
recommended.
#
Parking with the Side Stand
1.
Stop the engine.
2.
Push the side stand down.
3.
Slowly lean the motorcycle to the left until its
weight rests on the side stand.
4.
Turn the handlebar fully to the left.
u
Turning the handlebar to the right
reduces stability and may cause the
motorcycle to fall.
5.
Turn the ignition switch to the (Lock)
position and remove the key.
2 P. 42
Refuelling and Fuel Guidelines
Follow these guidelines to protect the engine,
fuel system and catalytic converter:
●
Use only unleaded petrol.
●
Use recommended octane number. Using
lower octane petrol will result in decreased
engine performance.
●
Do not use fuels containing a high
concentration of alcohol.
2 P. 127
● Do not use stale or contaminated petrol or
an oil/petrol mixture.
● Avoid getting dirt or water in the fuel tank.
20180116165849_32K0AC000_eng_BOOK Page 16 Tuesday, January 16 2018 17:05:27 JST
Riding Precautions
Motorcycle Safety
13
Accessories &
Modifications
We strongly advise that you do not add any
accessories that were not specifically designed
for your motorcycle by Honda or make
modifications to your motorcycle from its
original design. Doing so can make it unsafe.
Modifying your motorcycle may also void your
warranty and make your motorcycle illegal to
operate on public roads and highways. Before
deciding to install accessories on your
motorcycle be certain the modification is safe
and legal.
3WARNING
Improper accessories or modifications
can cause a crash in which you can be
seriously hurt or killed.
Follow all instructions in this owner's
manual regarding accessories and
modifications.
Do not pull a trailer with, or attach a sidecar to,
your motorcycle. Your motorcycle was not
designed for these attachments, and their use
can seriously impair your motorcycle's handling.
20180116165849_32K0AC000_eng_BOOK Page 17 Tuesday, January 16 2018 17:05:27 JST
Accessories & Modifications
Motorcycle Safety
14
Loading
● Carrying extra weight affects your
motorcycle's handling, braking and stability.
Always ride at a safe speed for the load you
are carrying.
●
Avoid carrying an excessive load and keep
within specified load limits.
Maximum weight capacity / Maximum
luggage weight
2 P. 129
●
Tie all luggage securely, evenly balanced
and close to the centre of the motorcycle.
●
Do not place objects near the lights or the
muffler.
3WARNING
Overloading or improper loading can
cause a crash and you can be seriously
hurt or killed.
Follow all load limits and other loading
guidelines in this manual.
20180116165849_32K0AC000_eng_BOOK Page 18 Tuesday, January 16 2018 17:05:27 JST
Loading
Motorcycle Safety
15
Parts Location
20180116165849_32K0AC000_eng_BOOK Page 19 Tuesday, January 16 2018 17:05:27 JST
Operation Guide
16
Engine oil level inspection
window
(P.78
)
Throttle grip (P.95
)
Coolant reserve tank cap/
dipstick
(P.82
)
Rear brake fluid reservoir
(P.84
)
Engine oil fill cap (P.78
)
Front brake fluid reservoir
(P.84)
Tool kit/Document bag
(P.48)
Clutch lever (P.92
)
Engine oil filter (P.80
)
Right shroud (P.76
)
Brakelight switch (P.86)
Rear brake pedal
Data link connector
20180116165849_32K0AC000_eng_BOOK Page 20 Tuesday, January 16 2018 17:05:27 JST
Operation Guide
17
Crankcase breather (P.96
)
Fuel fill cap (P.46)
Drive chain (P.88
)
Side stand (P.87)
Shift lever (P.45)
Front seat (P.70
)
Rear seat (P.75
)
Engine oil drain bolt (P.80)
Battery (P.67)
Fuse boxes (P.115
)
Helmet holders (P.47
)
Drive chain slider (P.91
)
Fuel tank cover (P.71)
Left shroud (P.76)
Rear suspension spring
preload adjuster
(P.98
)
Instruments
20180116165849_32K0AC000_eng_BOOK Page 21 Tuesday, January 16 2018 17:05:27 JST
Operation Guide
18
Tachometer
NOTICE
Do not operate the engine in the tachometer red zone.
Excessive engine speed can adversely affect engine life.
Tachometer red zone
(excessive engine rpm range)
SET
button
Display Check
When the ignition switch is turned to the
(On) position, all the mode and digital
segments will show. If any part of these displays does not come on when it should,
have your dealer check for problems.
SEL
button
20180116165849_32K0AC000_eng_BOOK Page 22 Tuesday, January 16 2018 17:05:27 JST
Operation Guide
19
Continued
Remaining fuel when only 1st (E)
segment starts flashing: approximately
1.9 L (0.50 US gal, 0.42 Imp gal)
Fuel gauge
If the fuel gauge indicator flashes in a
repeat pattern or turns off:
(P.104
)
Clock (12-hour display)
Speedometer
Coolant temperature gauge (
)
When the coolant is over specified
temperature, the segment H flashes.
To set the clock:
(P.28)
Current fuel mileage, Average fuel mileage [AVG] ,
Fuel consumption, and Average speed [AVG]
(P.24
)
Odometer [TOTAL] & Tripmeter
[TRIP A/B] & Stopwatch
(P.20)
If the segment H flashes while
riding:
(P.101
)
Odometer [TOTAL] & Tripmeter [TRIP A/B] & Stopwatch
The
SEL
button switches between the odometer, tripmeter A, tripmeter B and stopwatch.
20180116165849_32K0AC000_eng_BOOK Page 23 Tuesday, January 16 2018 17:05:27 JST
Operation Guide
20
Instruments (Continued)
Odometer Tripmeter A Tripmeter B
Stopwatch
#
Odometer [TOTAL]
Total distance ridden. When “
” is
displayed, go to your dealer for service.
#
Tripmeter [TRIP A/B]
Distance ridden since tripmeter was reset.
When “
” is displayed, go to your
dealer for service.
To reset the tripmeter:
(P.22)
#
Stopwatch
Shows elapsed time since the
SET
button
was pushed to start the measurement.
Display range:
0H00M00.0S - 9H59M59.9S
•
Above 9H59M59.9S back to 0H00M00.0S
To use the stopwatch:
(P.23
)
20180116165849_32K0AC000_eng_BOOK Page 24 Tuesday, January 16 2018 17:05:27 JST
Operation Guide
21
Continued
#
To reset the tripmeter [TRIP A/B],
average fuel mileage [AVG], fuel
consumption and average speed [AVG]
To reset the tripmeter A, average fuel
mileage A, fuel consumption A and average
speed A (these are based on tripmeter A)
together, press and hold the
SEL
button
while tripmeter A is displayed.
When they are reset, reset display appears at
each indication. Then, the display returns to
the last selected indication.
To reset the tripmeter B, average fuel
mileage B, fuel consumption B and average
speed B (these are based on tripmeter B)
together, press and hold the
SEL
button
while tripmeter B is displayed.
When they are reset, reset display appears at
each indication. Then, the display returns to
the last selected indication.
20180116165849_32K0AC000_eng_BOOK Page 25 Tuesday, January 16 2018 17:05:27 JST
Operation Guide
22
Instruments (Continued)
Current fuel
mileage
or or
Fuel
consumption A
Average
speed A
Tripmeter A
or
Average fuel
mileage A
Current fuel
mileage
or or
Fuel
consumption B
Average
speed B
Tripmeter B
or
Average fuel
mileage B
Stopwatch
#
To Measure the Time
a
Select the stopwatch. (P.20
)
b
To start measurement, press the
SET
button.
u
The measurement keeps going, if you
change an item while measuring.
c
To finish measurement, press the
SET
button.
u
The measurement can also be finished
by turning the ignition switch to the
(Off) position.
#
To Restart the Measurement
Press the
SET
button again. The stopwatch
restarts measurement.
#
To Reset the Measured Value
Press and hold the
SEL
button when the
stopwatch is displayed and also the
measurement is finished.
20180116165849_32K0AC000_eng_BOOK Page 26 Tuesday, January 16 2018 17:05:27 JST
Operation Guide
23
Continued
Stopwatch
SET
button
SEL
button
Current fuel mileage, Average fuel mileage [AVG] , Fuel consumption, and Average
speed [AVG]
The
SET
button switches between the current fuel mileage, average fuel mileage, fuel
consumption and average speed.
u
The items cannot be switched by the
SET
button if the stopwatch is displayed.
20180116165849_32K0AC000_eng_BOOK Page 27 Tuesday, January 16 2018 17:05:27 JST
Operation Guide
24
Instruments (Continued)
Current fuel
mileage
Average fuel
mileage
Fuel
consumption
Average
speed
#
Current fuel mileage
Displays the current instant fuel mileage.
Display range: 0.0 to 299.9 L/100km (km/L,
mile/gal or mile/L)
•
More than 299.9 L/100km (km/L, mile/gal
or mile/L): “299.9” is displayed.
•
When your speed is less than 6 km/h (4
mph): “
” is displayed.
When “
” is displayed except for the
above-mentioned cases, go to your dealer
for service.
#
Average fuel mileage [AVG]
Displays the average fuel mileage since the
selected tripmeter was reset.
The average fuel mileage will be calculated
based on value displayed on the tripmeter (A
or B) selected.
Also, the average fuel mileage for tripmeter
A will be displayed when the odometer,
tripmeter A, and stopwatch are selected.
Display range: 0.0 to 299.9 L/100km (km/L,
mile/gal or mile/L)
•
More than 299.9 L/100km (km/L, mile/gal
or mile/L): “299.9” is displayed.
•
When the tripmeter A or B is reset: “
”
is displayed.
When “
” is displayed except for the
above-mentioned cases, go to your dealer
for service.
To reset the average fuel mileage:
(P.22
)
20180116165849_32K0AC000_eng_BOOK Page 28 Tuesday, January 16 2018 17:05:27 JST
Operation Guide
25
Continued
#
Fuel consumption
Displays the fuel consumption since the
selected tripmeter was reset.
The fuel consumption will be calculated
based on value displayed on the tripmeter (A
or B) selected.
Also, the fuel consumption for tripmeter A
will be displayed when the odometer,
tripmeter A, and stopwatch are selected.
Display range: 0.0 to 299.9 L (litres) or 0.0 to
299.9 gal (gallon)
•
More than 299.9 L (litres) or 299.9 gal
(gallon): “299.9” is displayed.
When “
” is displayed, go to your dealer
for service.
To reset the fuel consumption:
(P.22
)
#
Average speed
Displays the average speed since the selected
tripmeter was reset.
The average speed will be calculated based
on value displayed on the tripmeter (A or B)
selected.
Also, the average speed for tripmeter A will
be displayed when the odometer, tripmeter
A, and stopwatch are selected.
Display range: 0 to 199 km/h (0 to 124 mile/h)
•
Initial display: “---” is displayed.
• When your motorcycle has travelled less
than 0.2 km (0.12 mile) since the engine
was started: “---” is displayed.
• When your motorcycle operating time is
less than 30 seconds since the engine was
started: “---” is displayed.
When “---” is displayed except for the above-
mentioned cases, go to your dealer for
service.
To reset the average speed:
(P.22
)
20180116165849_32K0AC000_eng_BOOK Page 29 Tuesday, January 16 2018 17:05:27 JST
Operation Guide
26
Instruments (Continued)
Loading...