FRONT FORK TOP
When this accessory becomes dirty, rinse it •
thoroughly with cool water to remove loose dirt,
then wipe with a clean cloth or sponge.
Do not use a brush to clean this accessory as it •
may scratch the surface.
Never use organic solvents such as gasoline, •
thinner, or benzine to clean this accessory. Also
do not use acid or alkaline cleaners to clean this
accessory.
Wipe up spilled brake at once as it may damage •
the surface.
CB1100
Genuine Accessory User’s Guide
METER COVER
When this accessory becomes dirty, rinse it •
thoroughly with cool water to remove loose dirt,
then wipe with a clean cloth or sponge.
Do not use a brush to clean this accessory as it •
may scratch the surface.
Never use organic solvents such as gasoline, •
thinner, or benzine to clean this accessory. Also
do not use acid or alkaline cleaners to clean this
accessory.
Wipe up spilled brake fluid at once as it may •
damage the plastic surface.
FRONT FORK TOP
GRIP HEATER
GRIP HEATER
HEADLIGHT
CASE
This accessory replaces the throttle pipe with a •
combined heated grip/throttle pipe. Therefore,
the throttle operation has a different feel after
installation.
Use a 5A fuse for replacement of the fuse of this •
accessory harness. Do not use any other fuse for
replacement.
<RIGHT SIDE>
FUSE
When this accessory becomes dirty, rinse it •
thoroughly with cool water to remove loose dirt,
then wipe with a clean cloth or sponge.
Do not use a brush to clean this accessory as it •
may scratch the surface.
Never use organic solvents such as gasoline, •
thinner, or benzine to clean this accessory. Also
do not use acid or alkaline cleaners to clean this
accessory.
Wipe up spilled brake fluid at once as it may •
damage the plastic surface.
METER COVER
METER PANEL
METER PANEL
REAR CARRIERHEADLIGHT CASE
REAR CARRIER
When this accessory becomes dirty, rinse it •
thoroughly with cool water to remove loose dirt,
then wipe with a clean cloth or sponge.
Do not use a brush to clean this accessory as it •
may scratch the surface.
Never use organic solvents such as gasoline, •
thinner, or benzine to clean this accessory. Also
do not use acid or alkaline cleaners to clean this
accessory.
Wipe up spilled brake fluid at once as it may •
damage the plastic surface.
The weight of the cargo must not exceed the •
following maximum weight capacity:
17.6 lb (8.0 kg)
© 2012 Honda Motor Co., Ltd.
MII 14356 (1211)
879OM-MGC-A000
1 of 3
SIDE COVER
SIDE COVER
When this accessory becomes dirty, rinse it •
thoroughly with cool water to remove loose dirt,
then wipe with a clean cloth or sponge.
Do not use a brush to clean this accessory as it •
may scratch the surface.
Never use organic solvents such as gasoline, •
thinner, or benzine to clean this accessory. Also
do not use acid or alkaline cleaners to clean this
accessory.
Wipe up spilled brake or battery fluid at once as it •
may damage the plastic surface.
CB1100
Genuine Accessory User’s Guide
Position the hinge of the lock assembly on the
2.
carrier base as shown.
HINGE
CARRIER BASE
TOP BOX
TOP BOX
RETAINING TAB
CARRIER BASE
The weight of the cargo must not exceed the •
following maximum weight capacity:
6.6 lb (3.0 kg)
Be sure that the top box is installed securely •
before riding.
The top box is not perfectly watertight, and water •
may enter when washing the motorcycle or when
it rains.
HANDLE
LEVER
HOW TO INSTALL THE TOP BOX
Insert the retaining tabs of the top box into the
1.
carrier base as shown.
Install the top box with the handle lever •
raised.
Lower the handle lever as shown.
3.
HANDLE LEVER
Lock the top box by turning the key in the
4.
direction shown.
KEY
2 of 3