Item # _____________________________________
Quantity ___________________________________
C.S.I. Section 11400
WRAPPING SYSTEM
701 S Ridge Avenue, Troy, OH 45374
1-888-4HOBART • www.hobartcorp.com
HAND-WRAP STATIONS
MODELS
❑ W32-6 Wrap Station
❑ W32C-5 Wrap Station
STANDARD FEATURES
(both models)
■ Easy to load lm
■ Low-temperature lm cut-off system
■ Stainless steel element
■ 3-roll lm capacity – 8" to 18" wide; Top roll limited
to 14" wide
■ Fingertip lm selection
■ Maximum roll outside diameter 9
■ 3" ID core plugs standard
■ Rugged aluminum and stainless steel construction
■ Adjustable height from 37" to 39
■ Operates in all ambient temperatures
W32 STANDARD FEATURES
■ Furnished with all Hobart Semi-Automatic CLA
Systems unless specied otherwise
■ Compact 12
1
⁄2" deep x 25" wide design
W32C STANDARD FEATURES
■ Built-in hotplate
■ Deep 26" x 22
freestanding use
1
⁄2" wide frame provides stability for
1
⁄2"
1
⁄2"
ACCESSORIES
W32 OPTIONS AT EXTRA COST
■ 55A-SHELFA – Platter Shelf
W32C OPTIONS AT EXTRA COST
■ 69A-SHELF – Platter Shelf
SPECIFICATIONS
CONSTRUCTION: Rugged aluminum frame and roll
core plugs with stainless steel wrapping surface and
roll shafts plated steel.
DIMENSIONS: W32 – 121⁄2 deep x 25" wide;
W32C – 26" deep x 221⁄2" wide.
OPTIONAL PLATTERS: 55A – stainless steel platter
shelf w/aluminum mounting brackets. 22" L x 14" W.
10 lbs. shipping weight. 69A – stainless steel platter
shelf w/aluminum mounting brackets. 141⁄2" x 241⁄2".
10 lbs. shipping weight.
HOTPLATE ON W32C: 8" x 15" teon coated
FILM HOLDERS: Three roll lm selector. 9.5" capacity
diameter x 18" maximum length (lower two rolls),
14" maximum length upper roll.
ELECTRICAL: W32 – 100-120/60/1, input 1 amp;
W32C – 100-120/60/1, input 11.3 amps, including hot
plate and lm cutting rod.
SHIPPING WEIGHTS: W32 – 50 lbs.; W32C – 60 lbs.;
55A – 10 lbs.; 69A – 5 lbs.
WRAPPING SYSTEM ACCESSORIES
W3-2 Wrap Station
W3-2C Wrap Station with two
optional 69A Platter Shelves
F-40256 – Wrapping System Accessories Page 1 of 4
WRAPPING SYSTEM
ACCESSORIES
MODEL
❑ SP-5
STANDARD FEATURES
■ 12" wide sealer belt
■ Flexible working height 35
■ Belt speed 330" per minute
ACCESSORIES
❑ Requires 51A sealer legs or 52A
sealer support, or both depending
on system ordered
1
⁄2" to 38"
701 S Ridge Avenue, Troy, OH 45374
1-888-4HOBART • www.hobartcorp.com
POWERED SEALER BELT
SPECIFICATIONS
CONSTRUCTION: Heavy duty
stainless steel frame. Durable sealer
belt.
DIMENSIONS (including legs):
36"H x 42"L x 163⁄4"W x 31⁄8"D
(9"D at motor location).
ELECTRICAL: 208-240/60/1,
3 wire, 15 amps. Thermostatic heat
control. Motor, subfractional H.P.
SHIPPING WEIGHT: SP-5 - 75 lbs.;
51A - 10 lbs.; 52A - 8 lbs.
MODELS
❑ RBG
❑ RBG-C
MODEL
❑ 90P
ROTARY BIN
SPECIFICATIONS
CONSTRUCTION: Aluminum tub and
stainless steel frame, hard rubber casters
on RBG-C.
DIMENSIONS: Adjustable height from
287⁄8" to 371⁄2".
SHIPPING WEIGHT: 65 lbs.
90P POWER CURVE CONVEYOR (90°)
SPECIFICATIONS
CONSTRUCTION: Stainless/ aluminum frame and
stainless steel legs. Stainless steel side panels. Nylon
rollers with stainless steel shafts and strip polyethylene
bearings. Rollers removed for washing.
DIMENSIONS: Adjustable height from 331⁄2" to 343⁄8".
Turning radius to roller center is 143⁄4"
ELECTRICAL: 115V, 50/60 Hz, 1 phase, .47 amps and
54 rpm @ 60 Hz, 1⁄25 HP reversible motor.
SHIPPING WEIGHT: 150 lbs.
Page 2 of 4 F-40256 – Wrapping System Accessories
WRAPPING SYSTEM
701 S Ridge Avenue, Troy, OH 45374
1-888-4HOBART • www.hobartcorp.com
ROLLER/DISCHARGE TABLE
MODELS
❑ HRT2-1 – 36"L work area, 24"L adjustable conveyor, 34"H
❑ HRT4-2 – 36"L work area, 12"L adjustable conveyor, 28"H
❑ HRT5-3 – 36"L work area, 48"L adjustable conveyor, 28"H
❑ HRT6-2 – 48"L work area, 48"L adjustable conveyor, 28"H
STANDARD FEATURES
■ Work areas are 36" to 48" long
■ Available with single or double
tiered label dispenser
ACCESSORIES
❑ HRT-LD136 – Single label
dispenser (36"W table)
❑ HRT-LD236 – Double tier label
dispenser (36"W table)
❑ HRT-LD248 – Double tier label
dispenser (48"W table)
❑ HRT-LABKIT – 49 additional
round disks
SPECIFICATIONS
CONSTRUCTION: Heavy duty
stainless steel.
DIMENSIONS: 36" to 48" long,
28" to 34" high. Adjustable
conveyor 12" to 24" long.
SHIPPING WEIGHTS: HRT2-1
– 183 lbs.; HRT4-2 – 161 lbs.;
HRT5-3 – 209 lbs.; HRT6-2 –
227 lbs.; HRT-LD136 – 23 lbs.;
HRT-LD236 – 24 lbs.; HRT-LD248
– 43 lbs.; HRT-LABKIT – 2 lbs.
ACCESSORIES
STRAIGHT ROLLER CONVEYORS
MODEL
❑ CR-1404
STANDARD FEATURES
■ Can be attached as an extension
to CB-1105, CB-1108, or CB-1112
motorized belt conveyors
■ Durable
rollers
3
⁄4" diameter aluminum
SPECIFICATIONS
CONSTRUCTION: Heavy gauge
steel frame and legs with baked
epoxy nish (legs on low end only)
DIMENSIONS: 45" long, 14" wide,
low end adjustable from 18" to
32" high
SHIPPING WEIGHT: 67 lbs.
MODEL
❑ CONV-EXT
STANDARD FEATURES
■ Durable
aluminum rollers
■ Attaches to CB-1108 or
CLA
3
⁄4" diameter
SPECIFICATIONS
CONSTRUCTION: Heavy
gauge steel frame and legs
with baked epoxy nish
DIMENSIONS: 90" long,
14" wide, 11⁄8" deep, low end
adjustable from 18" to 32"
high. High end adjustable
from 281⁄2" to 411⁄2" high.
SHIPPING WEIGHT: 83 lbs.
F-40256 – Wrapping System Accessories Page 3 of 4
WRAPPING SYSTEM
ACCESSORIES
DETAILS AND DIMENSIONS
701 S Ridge Avenue, Troy, OH 45374
1-888-4HOBART • www.hobartcorp.com
AWS/Access CLA System with Roller Conveyor and HRT
As continued product improvement is a policy of Hobart, specications are subject to change without notice.
Page 4 of 4 F-40256 – Wrapping System Accessories
F-40256 (REV. 11/09) LITHO IN U.S.A. (H-01)
Loading...