Hobart CLPS76e User Manual
Item # _____________________________________
Quantity ___________________________________
C.S.I. Section 11400
CLPS76e
701 S Ridge Avenue, Troy, OH 45374
1-888-4HOBART • www.hobartcorp.com
STANDARD FEATURES
■ 245 racks per hour
■ Opti-RinSe™ system
■ Rapid Return Conveyor Drive Mechanism
■ Insulated hinged double doors with door
interlock switches
■ 19.5 inch chamber height opening
■ Top mounted micro-processer control module
■ Energy saver mode
■ Dirty water indicator
■ Low temperature alert
■ Conveyor dwell
■ Delime notication
■ Service diagnostics
■ NAFEM Data Protocol compliant
■ Computational Fluid Dynamic Designed Self-
Aligning Wash Manifolds
■ Stainless steel debossed anti-clogging wash
arms
■ Removable Integrated Pump Intake Screen
■ Stainless steel self-draining pumps and impellers
■ Single, sloping scrap screen and deep basket
■ Stainless panels enclose perimeter and bottom
■ Door actuated drain closure
■ Single point electrical connection (three phase
only), does not include the booster heater
■ Convertible hot water or low temp nal rinse
■ Vent fan and booster heater control
DISHWASHER
MODEL
❑ CLPS76e – Dishwasher
OPTIONS AT EXTRA COST
❑ Stainless steel pressure-less 15/KW booster
heater
❑ Higher than standard chamber
ACCESSORIES
❑ Stainless steel vent hoods
❑ Direct drive unloader
❑ Side loader
❑ Blower-dryer
❑ Drain water tempering kit
❑ Flanged feet kit (requires three kits)
Specications, Details and Dimensions on Inside and Back.
CLPS76e DISHWASHER
DIRECTION OF OPERATION
❑ Right to Left
❑ Left to Right
VOLTAGE
❑ 208/60/1 ❑ 240/60/1 ❑ 380/60/3
❑ 208/60/3 ❑ 240/60/3 ❑ 480/60/3
❑ 600/60/3
F40212 – CLPS76e Dishwasher Page 1 of 12
Shown with optional vent hoods
CLPS76e
DISHWASHER
701 S Ridge Avenue, Troy, OH 45374
1-888-4HOBART • www.hobartcorp.com
THE CLe WAREWASHER IS NOW STANDARD WITH MORE EFFICIENT FEATURES THAN EVER . . .
Inside and out the CLe warewashers by Hobart are packed with standard components and patented design
innovations that make them the biggest value in the dishwasher industry.
Wash Manifolds. Computational Fluid Dynamic
The insulated hinged inspection doors provide easy
access in the chamber. Exterior wash pipes and
reduced interior bafes reduce clean-up time.
The Rapid Return drive allows for a wide separation
between the wash and the rinse zone.
designed wash manifolds are self-aligning and come
with Hobart’s signature debossed anti-clogging
nozzles for superior result.
The Hobart exclusive microprocessor control module
offers a choice of many features, such as an exclusive
Energy Saver Mode, Low Temperature Alerts, and
Dirty Water Indicator. It also displays pertinent
machine status and has a Delime Notication. The
controls have built-in Service Diagnostics and are
NAFEM Data Protocol Compliant.
Soil Management System. Screen design sheds soil
more easily than at screens, reduces frequency of
cleaning — easy to empty large soil particles . . . Just
lift out the scrap basket.
Opti-RinSe™. Hobart’s exclusive Opti-RinSe™ signi-
cantly reduces operating cost by reducing rinse water
and the energy required to heat the water. The unique
spray pattern uses large droplets to more efciently
sanitize the ware.
OTHER STANDARD FEATURES . . .
• Thermal Layer Curtains help keep the heat inside
the machine.
• Ball Detent Clutch Conveyor Drive for maximum
protection against conveyor Jams
• Integrated Removable Pump Intake Screen to
offer the ultimate guard of keeping debris from
entering the pump.
• Hinged Door Seals and stainless steel labyrinth seal
for drip-free operation
• Low-Temp Convertibility In Field. All machines
shipped hot. Change software in eld at set up to
low temperature if desired – then, if requirements
change, convert from one mode to the other in the
eld. An exclusive feature – standard from Hobart.
• Door Actuated Drain Closure. Closing the door
automatically actuates drain closure, eliminates
extra manual steps, ensures that closure is in the
correct position.
Page 2 of 12 F40212 – CLPS76e Dishwasher
CLPS76e
701 S Ridge Avenue, Troy, OH 45374
1-888-4HOBART • www.hobartcorp.com
AVAILABLE OPTIONS AND ACCESSORIES . . .
Flexibility is synonymous with Hobart CLe dishwash ers. If your operation demands a dishwasher with a
vent hood, an extended hood . . . a power scrapper,
just specify the combination of options that suit your
needs.
Built-in Pressureless Stainless Steel Booster Heater.
Interwired and interplumbed. Saves on installation and
saves oor space. Simplies operation with just one
switch to power dishmachine and booster.
Side Loader. Save up to 20 square feet in the dishroom
layout with an optional C-Line Side Loader. Racks are
indexed 90° into the dishwasher automatically – a
feature that cuts space and reduces labor dramatically.
Your dishroom team will appreciate this feature.
OTHER AVAILABLE ACCESSORIES . . .
Blower-dryer, steam booster heater, and a singlepoint electrical connection to include electric booster
heater.
Machine Ratings (Mechanical)
Racks per hour (193⁄4" x 193⁄4") 245
Conveyor Speed - feet per minute 6.8 max.
Dishes per Hour (Average 25 per rack) 6,100
Glasses per Hour (Average 45 per rack) 10,980
Floor Space – Table to Table (Inches) 76
Overall Dimensions – H x W x D (Inches) 681⁄2 x 761⁄2 x 311⁄4
Motor H.P. Power Scrapper 2
Conveyor Drive H.P.
Number of Tanks 2
Tank Capacity – Gallons Power Scrapper 23
Pump Capacity –
Gallons per Minute - Weir Test 165
Heating Equipment –
(For keeping power wash hot)
Gas Burners (with Natural Gas) 78,000 BTU per hr.
Electric Heating Unit – Size Used 15 KW
Optional Booster Heater / Final Rinse 15 KW / 30 KW
Rinse – Minutes operated during hour of
maximum operation 60
Final Rinse Flow – Gals. per min.
At 15 PSI Flow Pressure 1.98
At 20 PSI Flow Pressure 2.30
Final Rinse Flow – Gals. per hr. – MAXIMUM
At 15 PSI Flow Pressure 119
At 20 PSI Flow Pressure 138
Rinse 20 PSI Flow Pressure
Gal./Rack
Steam Consumption –
Pounds per hr. - MAXIMUM
Approx. 30 lbs. per hr. = 1 boiler H.P. (BHP)
Dishwasher, based on 20 PSI steam and
on customer supplying final rinse water
at 180°F maximum 65
Steam Booster, if used on 20 PSI steam 20 PSI water flowing - 130°F entering
water raised to 180°F min. 60
Exhaust Requirements –
Cubic Feet per minute
Peak Rate of Drain Flow – Gallons per minute.
(Initial rate with full tank) 38
Shipping Weight Crated – Approximate lbs. 613
DISHWASHER
CLPS76e
Wash 2
1
⁄6
Wash 23
Hot Water Sanitizing -
Chemical Sanitizing
.56 - 180°F – .56 - 120°F
Entrance End 200
Discharge End 400
F40212 – CLPS76e Dishwasher Page 3 of 12
CLPS76e
DISHWASHER
701 S Ridge Avenue, Troy, OH 45374
1-888-4HOBART • www.hobartcorp.com
Page 4 of 12 F40212 – CLPS76e Dishwasher
Loading...