Item #______________________________________
Quantity____________________________________
C.S.I. Section 11400
|
|
|
|
|
|
|
|
CLCS66e |
|
|
701 S Ridge Avenue, Troy, OH 45374 |
|
DISHWASHER |
|
|
|
|
|
|
|
1-888-4HOBART • www.hobartcorp.com |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
STANDARD FEATURES
■202 racks per hour
■Opti-RinSe™ system
■Rapid Return Conveyor Drive Mechanism
■Insulated hinged double doors with door interlock switches
■19.5 inch chamber height opening
■Top mounted micro-processer control module
■Energy saver mode
■Dirty water indicator
■Low temperature alert
■Conveyor dwell
■Delime notification
■Service diagnostics
■NAFEM Data Protocol compliant
■Computational Fluid Dynamic Designed SelfAligning Wash Manifolds
■Stainless steel debossed anti-clogging wash arms
■Removable Integrated Pump Intake Screen
■Stainless steel self-draining pumps and impellers
■Single, sloping scrap screen and deep basket
■Stainless panels enclose perimeter and bottom
■Door actuated drain closure
■Single point electrical connection (three phase only), does not include the booster heater
■Convertible hot water or low temp final rinse
■Vent fan and booster heater control
DIRECTION OF OPERATION
Right to Left
Left to Right
VOLTAGE
208/60/1 |
240/60/1 |
380/60/3 |
208/60/3 |
240/60/3 |
480/60/3 |
|
|
600/60/3 |
MODEL
CLCS66e – Dishwasher
OPTIONS AT EXTRA COST
Stainless steel pressure-less 15/30 KW booster heater
Higher than standard chamber
ACCESSORIES
Stainless steel vent hoods for the unload end, vent stack and damper kit for the load end
Direct drive unloader
Blower-dryer
Drain water tempering kit
Flanged feet kit (requires three kits)
Specifications, Details and Dimensions on Inside and Back.
CLCS66e shown
DISHWASHER eCLCS66
F40242 – CLCS66e Dishwasher |
Page 1 of 12 |
CLCS66e DISHWASHER
701 S Ridge Avenue, Troy, OH 45374
1-888-4HOBART • www.hobartcorp.com
THE CLe WAREWASHER IS NOW STANDARD WITH MORE EFFICIENT FEATURES THAN EVER . . .
Inside and out the CLe warewashers by Hobart are packed with standard components and patented design innovations that make them the biggest value in the dishwasher industry.
The insulated hinged inspection doors provide easy access in the chamber. Exterior wash pipes and reduced interior baffles reduce clean-up time.
The Rapid Return drive allows for a wide separation between the wash and the rinse zone.
The Hobart exclusive microprocessor control module offers a choice of many features, such as an exclusive Energy Saver Mode, Low Temperature Alerts, and Dirty Water Indicator. It also displays pertinent machine status and has a Delime Notification. The controls have built-in Service Diagnostics and are NAFEM Data Protocol Compliant.
Soil Management System. Screen design sheds soil more easily than flat screens, reduces frequency of cleaning — easy to empty large soil particles . . . Just lift out the scrap basket.
Wash Manifolds. Computational Fluid Dynamic designed wash manifolds are self-aligning and come with Hobart’s signature debossed anti-clogging nozzles for superior result.
Opti-RinSe™. Hobart’s exclusive Opti-RinSe™ significantly reduces operating cost by reducing rinse water and the energy required to heat the water. The unique spray pattern uses large droplets to more efficiently sanitize the ware.
OTHER STANDARD FEATURES . . .
•Thermal Layer Curtains help keep the heat inside the machine.
•Ball Detent Clutch Conveyor Drive for maximum protection against conveyor Jams
•Integrated Removable Pump Intake Screen to offer the ultimate guard of keeping debris from entering the pump.
•Hinged Door Seals and stainless steel labyrinth seal for drip-free operation
•Low-Temp Convertibility In Field. All machines shipped hot. Change software in field at set up to low temperature if desired – then, if requirements change, convert from one mode to the other in the field. An exclusive feature – standard from Hobart.
•Door Actuated Drain Closure. Closing the door automatically actuates drain closure, eliminates extra manual steps, ensures that closure is in the correct position.
Page 2 of 12 |
F40242 – CLCS66e Dishwasher |
701 S Ridge Avenue, Troy, OH 45374
1-888-4HOBART • www.hobartcorp.com
CLCS66e DISHWASHER
AVAILABLE OPTIONS AND ACCESSORIES . . .
Flexibility is synonymous with Hobart CLe dishwashers. If your operation demands a dishwasher with a vent hood, an extended hood . . . a power scrapper, just specify the combination of options that suit your needs.
Built-in Pressureless Stainless Steel Booster Heater.
Interwired and interplumbed. Saves on installation and saves floor space. Simplifies operation with just one switch to power dishmachine and booster.
DDU38e Direct Drive Unloader. Center pawl to be connected to dishwasher conveyor by means of a stainless steel adjustable rod. As conveyor drives, center pawl drives racks around 90 degree corner. The DDU38e is designed to move the racks at the same speed as the conveyor dishwasher speed.
The DDU38e adds 38" to the length of the machine.
OTHER AVAILABLE ACCESSORIES . . .
Blower-dryer, steam booster heater, and a singlepoint electrical connection to include electric booster heater.
|
|
|
CLCS66e |
|
|
|
|
Machine Ratings (Mechanical) |
|
||
Racks per hour (193⁄4" x 193⁄4") |
202 |
||
Conveyor Speed - feet per minute |
5.6 max. |
||
|
|
|
|
Dishes per Hour (Average 25 per rack) |
5,025 |
||
|
|
|
|
Glasses per Hour (Average 45 per rack) |
9,045 |
||
|
|
|
|
Floor Space – Table to Table (Inches) |
66 |
||
|
|
|
|
Overall Dimensions – H x W x D (Inches) |
681⁄2 x 663⁄4 x 301⁄4 |
||
Motor H.P. |
Power Scrapper 2 |
||
|
|
|
Wash 2 |
|
|
|
|
Conveyor Drive H.P. |
1⁄6 |
||
Number of Wash Tanks |
2 |
||
|
|
|
|
Tank Capacity – Gallons |
Power Scrapper 23 |
||
|
|
|
Wash 23 |
|
|
|
|
Pump Capacity – |
|
||
|
Gallons per Minute - Weir Test |
165 |
|
|
|
|
|
Heating Equipment – |
|
||
(For keeping power wash hot) |
|
||
Gas Burners (with Natural Gas) |
78,000 BTU per hr. |
||
|
|
|
|
Electric Heating Unit – Size Used |
15 KW |
||
|
|
|
|
Optional Booster Heater / Final Rinse |
15 KW / 30 KW |
||
|
|
|
|
Rinse – Minutes operated during hour of |
|
||
|
maximum operation |
60 |
|
|
|
|
|
Final Rinse Flow – Gals. per min. |
|
||
At 15 PSI Flow Pressure |
1.8 |
||
|
|
|
|
At 20 PSI Flow Pressure |
2.1 |
||
|
|
|
|
Final Rinse Flow – Gals. per hr. – MAXIMUM |
|
||
At 15 PSI Flow Pressure |
108 |
||
|
|
|
|
At 20 PSI Flow Pressure |
126 |
||
|
|
|
|
|
|
|
Hot Water Sanitizing - |
Rinse 20 PSI Flow Pressure |
Chemical Sanitizing |
||
|
Gal./Rack |
.62 - 180°F – .62 - 120°F |
|
|
|
|
|
Steam Consumption – |
|
||
Pounds per hr. - MAXIMUM |
|
||
Approx. 30 lbs. per hr. = 1 boiler H.P. (BHP) |
|
||
Dishwasher, based on 20 PSI steam and |
|
||
on customer supplying final rinse water |
|
||
|
at 180°F maximum |
65 |
|
|
|
|
|
Steam Booster, if used on 20 PSI steam - |
|
||
20 PSI water flowing - 130°F entering |
|
||
water raised to 180°F min. |
60 |
||
|
|
|
|
Exhaust Requirements – |
|
||
Cubic Feet per minute |
|
||
|
|
Entrance End |
200 |
|
|
|
|
|
|
Discharge End |
400 |
|
|
|
|
Peak Rate of Drain Flow – Gallons per minute. |
|
||
(Initial rate with full tank) |
38 |
||
|
|
|
|
Shipping Weight Crated – Approximate lbs. |
613 |
||
|
|
|
|
F40242 – CLCS66e Dishwasher |
Page 3 of 12 |
CLCS66e DISHWASHER
701 S Ridge Avenue, Troy, OH 45374
1-888-4HOBART • www.hobartcorp.com
Page 4 of 12 |
F40242 – CLCS66e Dishwasher |