Hitachi HDR165 User Manual
Digital TV Recorder
Model
HDR165
Instruction manual
To obtain the best performance and ensure years of
trouble-free use. please read this instruction manual
completely.
Contents
Features ................................................................. 1
Accessories ............................................................ 1
Safety Precautions ................................................. 2
Power.................................................................. 2
SOME DOS AND DON'TS ON THE SAFE USE OF
EQUIPMENT .......................................................... 3
Overview of the Remote Control ............................ 4
Connections............................................................ 5
Remote Control ...................................................... 6
Connection to the Tv .............................................. 6
Power Connection .................................................. 7
Power On-Off.......................................................... 7
Antenna Connection............................................... 7
Main Interface......................................................... 8
Menu System.......................................................... 8
Channel List........................................................ 8
Deleting Channels ......................................... 9
Renaming Channels ...................................... 9
Adding Locks to Channels ............................. 9
Setting Favourites .......................................... 9
Program Guide ....................................................... 9
Timers................................................................... 12
Recordings Library ............................................... 12
Play Options: ................................................ 13
Main Title ...................................................... 13
Recording Title.............................................. 13
Chapter Options............................................ 14
Setup .................................................................... 14
Recordings.................................................... 14
Max Time Shift .............................................. 14
Auto Discard ................................................. 14
Format Disk .................................................. 15
Hard Disk Info ............................................... 15
Recording Format ......................................... 15
Configuration ........................................................ 16
Channel List.................................................. 16
Scan Encrypted ............................................ 17
Receiver Upgrade......................................... 17
Parental Locking ........................................... 17
Menu Lock .................................................... 17
Set Pin .......................................................... 17
Language...................................................... 17
Installation ............................................................ 18
Automatic Channel Scan .................................. 18
Manual Channel Scan ...................................... 18
First Time Installation........................................ 18
Message ....................................................... 18
Specific Functions of Remote Control .............. 18
Time Shifting(Pause Live Recording) ............... 19
TEXT............................................................. 19
WIDE ............................................................ 19
Notes .................................................................... 20
General troubleshooting ....................................... 21
Features
•DVB
• 200 Channels
• DVB 7 days event information (7 days EPG)
• TV scart (with RGB and CVBS support)
• Record timer via 7 day EPG
• Automatic search for all channels
• Timer can be used either for recording or as a
sleep timer
• Timer function (TV timer) programmable via EPG
• Favourite list
• Parental lock options at different levels
• DVB-T Compliant
•UHF-IV and UHF-V; 470-862 MHz, 8MHz bandwith
• Supports 16-, 64-QAM modulations
• Manual and automatic search options
• VIDEO & OSD :
• Video: MPEG2, PAL, 4:3/16:9
• Automatic day light saving time updating.
• Decoding & Video Out: PAL
• Audio: MPEG-1 layer I / II, MPEG-2 layer II, MPEG-2
AAC, MPEG-4 AAC
• Multi-format audio decoder
• Multi language audio support (up to 10)
• Audio mute and volume control
• Time shift – pause live TV.
• PIP (Picture in picture)
• Freeview Playback 2 support.
Accessories
RF Cable
Batteries 2 X AAA
Remote
Controller
Quick Start Guide
Scart Cable
English - 1 -
Instruction Book
Safety Precautions
Power
• Always use the provided AC adaptor.
• Should any solid object or liquid fall into the cabinet,
unplug the apparatus and have it checked by qualified
personnel before operating it any further.
• Operate only from the power source specified on
the AC adaptor.
• The power adaptor may become hot during normal
operation. This is not a malfunction.
• Please make sure that the adaptor is not covered
while in operation. Leave a space of 15 cm
(minimum) around the AC adaptor.
• The rating information and safety caution of the AC
adaptor are provided on the adaptor.
WARNING: When the set is not in use for a long
time, disconnect from the power.
.Power Cord
Do not place the unit, a piece of furniture, etc., on the
power cord (mains lead), or pinch the cord. Handle
the power cord by the plug. Do not pull out the plug by
tugging the cord and never touch the power cord when
your hands are wet as this could cause a short circuit
or electric shock. Never make a knot in the cord or tie
it with other cords. The power cords should be routed
in such a way that they are not likely to be stepped on.
A damaged power cord can cause fire or give you an
electrical shock. Check the power cord once in a while.
When you find it damaged, ask closest service agent for
help. When the AC power cord needs to be changed, it
should be done at a qualified service shop only.
Apparatus shall not be exposed to dripping or
splashing and no objects filled with liquids, such as
vases, shall be placed on the apparatus.
The mains plug is used as the disconnect device, the
disconnect device shall remain readily operable.
CAUTION
Batteries shall not be exposed to excessive heat such
as sunshine, fire or the like.
• Please do not place the set in a place subject to
direct sun light, excessive dust or mechanical shock
or in a location near heat sources.
• The set should be placed on a solid and safe base.
Do not place the apparatus on a soft surface such
as a rug that might block the ventilation holes on
the bottom.
• A location should not be selected such as a room
with high humidity, as the condensation, arising in
the kitchen for example, may cause malfunction or
damage the set.
• Heating or other thermal radiation under the set also
may cause malfunction or damage the set.
• The hot air, which arises during the operation, should
be ventilated with sufficient air circulation. Please do
not put the set into closed areas and do not cover it.
• Please avoid the contact of the set with water
or humidity. Do not put into operation near bath,
swimming pools.
• Take care to provide a good air circulation. Place
the apparatus in a location with adequate ventilation
to prevent heat build-up in the apparatus.
English - 2 -
SOME DOS AND DON'TS ON THE SAFE USE OF EQUIPMENT
This equipment has been designed and manufactured to meet international safety standards but, like any
electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured.
**************
DO read the operating instructions before you attempt to use the equipment.
DO ensure that all electrical connections (including the mains plug, extension leads and inter-connections
between the pieces of equipment) are properly made and in accordance with the manufacturer's
instructions. Switch off and withdraw the mains plug before making or changing connections.
DO consult your dealer if you are ever in doubt about the installation, operation or safety of your
equipment.
DO be careful with glass panels or doors on equipment.
DO route the mains lead so that it is not likely to be walked on, crushed, chafed, or subjected to
excessive wear and tear or heat.
**************
DON'T remove any fixed cover as this may expose dangerous voltages.
DON'T obstruct the ventilation openings of the equipment with items such as newspapers, tablecloths,
curtains, etc. Overheating will cause damage and shorten the life of the equipment.
DON'T allow electrical equipment to be exposed to dripping or splashing, or objects filled with liquids,
such as vases, to be placed on the equipment.
DON'T place hot objects or naked flame sources such as lighted candles or nightlights on, or close to
equipment. High temperatures can melt plastic and lead to fires.
DON'T use makeshift stands and NEVER fix legs with wood screws - to ensure
complete safety always fit the manufacturer's approved stand or legs with the fixings
provided according to the instructions.
DON'T use equipment such as personal stereos or radios so that you are distracted from
the requirements of traffic safety. It is illegal to watch television whilst driving.
DON'T listen to headphones at high volume, as such use can permanently damage your
hearing.
DON'T leave equipment switched on when it is unattended unless it is specifically stated
that it is designed for unattended operation or has a stand-by mode. Switch off using the
switch on the equipment and make sure that your family know how to do this. Special
arrangements may need to be made for infirm or handicapped people.
DON'T continue to operate the equipment if you are in any doubt about it working
normally, or if it is damaged in any way - switch off, withdraw the mains plug and consult
your dealer.
ABOVE ALL
--- NEVER let anyone especially children push anything into holes, slots or any other opening in
the case - this could result in a fatal electrical shock;
--- NEVER guess or take chances with electrical equipment of any kind
--- it is better to be safe than sorry!
English - 3 -
Overview of the Remote Control
English - 4 -
Connections
Rating label
FRONT VIEW
1.AERIAL OUT : Connect to your TV
2.ANTENNA IN : Aerial input
3.OPTICAL AUDIO : Optical Digital Audio Output
4.TV SCART : TV SCART connection
BACK VIEW
5. POWER SUPPLY : DC IN (12V)
English - 5 -
Remote Control
First open the battery cover on the underside of the remote control. Put in both batteries 1.5Volt (RO3/AAA)
referring to the imprinted symbols (+/-) in the battery case and put on the battery cover again. While using
the remote control, direct it towards the front side of the receiver. If the remote control does not work or the
chosen function does not work, the batteries are most probably exhausted and they should be replaced as
soon as possible. Please use only the leak proof batteries. It is best to remove the batteries from the remote
unit if you will not be using the remote control unit for long time.
Connection to the Tv
Connect your set-top box with a scart cable using the TV scart connector on the rear panel to your television’s
scart connector. The set-top box gives RGB or CVBS output. If you want to get the picture via scart connector
and your TV’s scart connector has an RGB input, then you can switch your digital set-top box to RGB mode, by
toggling TV out menu to RGB mode, in configuration menu. So, you will be able to achieve high performance
from your digital set-top box.
English - 6 -
Power Connection
IMPORTANT: The set-top box is designed to operate on 12 V DC. For this, an adaptor is
used which gives 12 V voltage. Connect this adaptor to a system that supplies 220-240V
AC,50Hz.
• After unpacking, allow the set-top box to reach the ambient room temperature before you connect the set
to the mains
Power On-Off
Connect all cables before plugging into the mains. After plugging in the mains cord of the set-top-box to the
mains supply, a light will be seen on the front panel (Standby mode). When the set-top-box is first powered
up please wait until the box is initialized before activating the receiver since booting of software will take some
time. Make sure that all cable connections are in place. Plug the mains. Please wait until unit is initialized.
This may take almost a minute.
This product conforms the latest European Union Power Consumption Regulations and features low power
standby mode. Product enters into the low power standby mode approximately 2-3 minutes later after you
press standby button to turn off the unit. Until low power mode is activated, clock will be displayed at the
display. When the low power mode is activated, display will be shut down. When you press standby button
during low power mode, it may take a minute until product is initialised. However if you press standby button
before low power mode is activated unit will be initialized in a couple of seconds (Active standby mode).
Although it is not recommended for enviromental reasons, you may disable low power mode in your product
at setup –configuration menu.
Important Note : If there is any ongoing programme recording or if any EPG programme recordings and/or
manual recordings is set to a nearby time, the unit does not switch to low power mode and remains in active
standby mode until recording tasks have been finished. At low power mode, the unit initializes a couple of
minutes before the actual time of the incoming recording task.
Important Note : The unit initializes time to time to receive updates from EPG broadcast in order to sycnronize
EPG recording tasks properly. After getting updates, the unit switches to low power mode automatically. This
takes a short while and it is not a malfunction.
Antenna Connection
English - 7 -
Main Interface
When the box is switched on from stand-by mode for
the first time or after first time installation, the following
menu message will be displayed.
After hard disk initializing process, First Time
Installation Menu window is displayed on the screen.
In this window, set the TV type with “
press OK to continue.
”/“ ” keys and
Menu System
Main menu is accessed by pressing the MENU key
on the remote control. Navigate with “
among the menus and press OK to activate menus.
In some sub-menus, press the BACK button to return
to the previous menu, otherwise, use it to exit from
the menu. In all menus there is an Info banner at the
bottom of the screen. These are functions that can be
used in the current menu.
The Main Menu is accessed, pressing the MENU
button. The items accessed through the Main Menu
are:
1.)Channel List
2.)Programme guide
3.)Timers
4.)Recording Library
5.)Setup
”/“ ” keys
Then “Do you want to start an automatic channel
scan?” pop-up menu is displayed. Auto search can
be started by selecting the “Yes” button. The box
will automatically find the channels and store them
for you.
To start installation process, select “Yes”, to cancel
select “No”.
The set-top box will automatically tune to the channels.
You can press the “MENU” button at any time during
the process.
Channel List
Channel list is the place where the channels are
managed. The following operations can be performed
in this menu:
1. Navigating the whole list of channels
2. Deleting unwanted channels
3. Renaming channels
4. Adding locks to channels
5. Setting the favourite list
Channel table is the place where the channels are
managed.
English - 8 -
Loading...