Hitachi Power Tools
ELECTRIC TOOL PARTS LIST
LIST NO. E489
ROTARY HAMMER
Model DH 24PC3
1
2
3
23
24
25
26
27
28
29
30
57
58
59
60
61
62
63
47
64
31
48
4
65
32
2005 • 5 •20
(E1)
5
6
7
8
9
10
11
12
13
40
56
76
77
14
41
15
44
16
45
17
46
83
84
49
61
33
66
50
34
68
18
35
69
51
36
70
19
37
71
52
42
72
38
73
53
39
74
20
21
54
75
22
43
55
501
502
503
67
78
75
85
82
81
79
86
80
PARTS
ITEM
NO.
CODE NO.
DESCRIPTION REMARKS
1 306-345 FRONT CAP 1
2 306-340 STOPPER RING 1
3 324-527 GRIP 1
4 324-528 BALL HOLDER 1
5 324-526 HOLDER PLATE 1
6 322-812 HOLDER SPRING 1
7 984-118 WASHER (B) 1
8 939-547
RETAINING RING FOR D20 SHAFT (10 PCS.)
9 301-654 TAPPING SCREW (W/FLANGE) D5X35 4
10 324-605 GEAR COVER ASS’Y 1 INCLUD. 47
11 NAME PLATE 1
12 307-688 OIL SEAL 1
13 322-815 SLEEVE 1
14 323-232 FELT PACKING (B) 1
15 690-4DD BALL BEARING 6904DDPS2L 1
16 324-522 SLEEVE (A) 1
17 322-813 RETAINING RING 37MM 1
18 324-530 PUSHING BUTTON 1
19 317-223 PUSHING SPRING 1
20 878-885 O-RING (S-18) 1
21 324-603 CHANGE LEVER 1
22 317-238 SPRING (B) 2
23 959-156 STEEL BALL D7.0 (10 PCS.) 1
24 323-184 CYLINDER 1
25 323-185 SECOND GEAR 1
26 317-233 SPRING (A) 1
27 317-234 WASHER (A) 1
28 317-235 RETAINING RING D30 1
29 324-525 SECOND HAMMER 1
30 944-486 O-RING (1AP-20) 1
31 324-523 HAMMER HOLDER 1
32 322-802 O-RING (B) 1
33 322-805 DAMPER (A) 1
34 322-808 O-RING (C) 1
35 324-524 DAMPER HOLDER 1
36 322-807 STOPPER RING 1
37 324-535 STRIKER 1
38 322-834 O-RING (I.D. 16) 1
39 324-534 PISTON 1
40 322-793 O-RING (I.D. 66.5) 1
41 324-542 INNER COVER ASS’Y 1 INCLUD. 44-46
42 322-798 PISTON PIN 1
43 322-799 WASHER (C) 2
44 324-543 FELT PACKING (A) 1
45 324-545 VALVE 1
46 324-544 FELT PACKING (B) 1
47 323-249 PINION SLEEVE 1
48 318-522 LOCK PLATE 1
49 323-181 SECOND PINION 1
50 323-182 CLUTCH SPRING 1
51 324-606 CLUTCH 1
ALTERNATIVE PARTS--- 2 ---
*
NO.
USED
1
DH 24PC3
5 -- 05
PARTS
ITEM
NO.
CODE NO.
DESCRIPTION
52 323-180 SECOND SHAFT 1
53 324-533 RECIPROCATING BEARING 1
54 322-797 FIRST GEAR 1
55 322-795 SPACER 1
56 626-VVM BALL BEARING 626VVC2PS2L 1
57 322-816 FELT PACKING 1
58 876-796 O-RING (P-22) 1
59 322-818 PACKING WASHER 1
60 608-DDM BALL BEARING 608DDC2PS2L 1
61 982-631 WASHER (A) 2
*62 360-720U ARMATURE ASS’Y 110V-120V 1 INCLUD. 60, 61, 66
*62 360-720E ARMATURE 220V-230V 1
*62 360-720F ARMATURE 240V 1
63 324-531 FAN GUIDE 1
64 961-672 HEX. HD. TAPPING SCREW D4X50 2
*65 340-635C STATOR 110V-120V 1
*65 340-635E STATOR 220V-230V 1
*65 340-635F STATOR 240V 1
66 608-VVM BALL BEARING 608VVC2PS2L 1
67 324-604 HITACHI PLATE 1
68 324-553 HOUSING 1
*69 324-549 CHOKE COIL (A) BROWN 1 EXCEPT FOR USA, CAN, GBR (110V),
*69 324-550 CHOKE COIL (A) BROWN 1 FOR GBR (110V)
70 324-536 SWITCH (1P PILLAR TYPE) 1
71 322-853 PUSHING BUTTON 1
*72 324-551 CHOKE COIL (A) BLUE 1 EXCEPT FOR USA, CAN, GBR (110V),
*72 324-552 CHOKE COIL (A) BLUE 1 FOR GBR (110V)
*73 324-538 INTERNAL WIRE (A) (BLUE) 1
74 999-041 CARBON BRUSH (1 PAIR) 1
75 955-203 BRUSH HOLDER 2
*76 324-537 INTERNAL WIRE (A) (BROWN) 1
77 999-072
CARBON BRUSH (AUTO STOP TYPE) (1 PAIR)
*78 994-273 NOISE SUPPRESSOR 1 EXCEPT FOR USA, CAN, INA, IND, SYR,
*79 981-373 TUBE (D) 2 FOR CORD
*80 953-327 CORD ARMOR D8.8 1
*80 938-051 CORD ARMOR D10.1 1
81 937-631 CORD CLIP 1
82 984-750 TAPPING SCREW (W/FLANGE) D4X16 2
83 LABEL (WEEE) 1
84 324-554 HANDLE COVER 1
85 301-653
TAPPING SCREW (W/FLANGE) D4X20 (BLACK) 3
*86 500-390Z CORD 1 (CORD ARMOR D8.8)
*86 500-446Z CORD 1 (CORD ARMOR D8.8) FOR GBR (230V)
*86 500-465Z CORD 1 (CORD ARMOR D8.8) FOR GBR (110V)
*86 500-235Z CORD 1 (CORD ARMOR D8.8) FOR INA
*86 500-245Z CORD 1 (CORD ARMOR D10.1) FOR SYR
*86 500-249Z CORD 1 (CORD ARMOR D8.8) FOR USA, CAN
*86 500-408Z CORD 1 (CORD ARMOR D8.8) FOR AUS, NZL
5 -- 05
ALTERNATIVE PARTS --- 3 ---
*
NO.
USED
REMARKS
INA, IND, SYR, KUW, SIN, HKG
INA, IND, SYR, KUW, SIN, HKG
FOR USA, CAN, INA, IND, SYR, KUW, SIN, HKG
FOR USA, CAN, INA, IND, SYR, KUW, SIN, HKG
1
KUW, SIN, HKG
DH 24PC3
PARTS
ITEM
NO.
CODE NO.
DESCRIPTION REMARKS
*86500-424Z CORD 1 (CORD ARMOR D8.8) FOR KUW, SIN
*86500-456Z CORD 1 (CORD ARMOR D8.8) FOR CHN
*86500-440Z CORD 1 (CORD ARMOR D8.8) FOR HKG
NO.
USED
DH 24PC3
ALTERNATIVE PARTS--- 4 ---
*
5 -- 05
STANDARD ACCESSORIES
ITEM
NO.
CODE NO.
DESCRIPTION REMARKS
501 324-555 CASE 1
502 324-548 SIDE HANDLE 1
* 503 303-709 DEPTH GAUGE 1
* 503 310-331 DEPTH GAUGE 2 FOR USA, CAN
NO.
USED
OPTIONAL ACCESSORIES
ITEM
CODE NO.
NO.
601 981-840
602 308-471
603 980-927
DESCRIPTION REMARKS
GREASE (A) FOR HAMMER. HAMMER DRILL (30G)
GREASE FOR HAMMER. HAMMER DRILL (70G) 1
GREASE FOR HAMMER. HAMMER DRILL (500G)
604 306-885 DUST COLLECTOR (B) ASS’Y 1 INCLUD. 605, 613
605 986-802 DUST COLLECTOR ASS’Y 1 INCLUD. 606-612
606 986-803 DUST COVER 1
607 986-804 SEAL COVER 1
608 948-310 RETAINING RING FOR D30 SHAFT 1
609 958-063 WASHER 1
610 959-150 STEEL BALL D6.35 (10 PCS.) 19
611 986-805 OUTER RACE 1
612 986-806 SOCKET 1
613 306-910 SOCKET ADAPTER (B) 1
614 971-787 DUST CUP 1
615 931-844 STOPPER 1
616 321-814 DRILL CHUCK 13VLRB-D 1 INCLUD. 617
617 995-344 FLAT HD. SCREW (A) (LEFT HAND) M6X25 1
618 321-813 DRILL CHUCK 13VLD-D 1
619 971-511Z + DRIVER BIT (A) NO. 2 25L 1
620 971-512Z + DRIVER BIT (A) NO. 3 25L 1
621 944-477 COTTER 1
622 982-684
623 982-685
CENTER PIN (A) 109L FOR CORE BIT D32-38
CENTER PIN (B) 104L FOR CORE BIT D45-90
624 982-672 CORE BIT (A) 25MM 1
625 982-673 CORE BIT (A) 29MM 1
626 982-674 CORE BIT (A) 32MM 1 INCLUD. 627
627 982-686 GUIDE PLATE (FOR CORE BIT 32MM) 1
628 982-675 CORE BIT (A) 35MM 1 INCLUD. 629
629 982-687 GUIDE PLATE (FOR CORE BIT 35MM) 1
630 982-676 CORE BIT (A) 38MM 1 INCLUD. 631
631 982-688 GUIDE PLATE (FOR CORE BIT 38MM) 1
632 982-677 CORE BIT (B) 45MM 1 INCLUD.633
633 982-689 GUIDE PLATE (FOR CORE BIT 45MM) 1
634 982-678 CORE BIT (B) 50MM 1 INCLUD.635
635 982-690 GUIDE PLATE (FOR CORE BIT 50MM) 1
636 971-794
637 971-795
638 971-796
639 971-797
640 971-798
641 971-799
ANCHOR SETTING ADAPTER A W1/4” (MANUAL)
ANCHOR SETTING ADAPTER A W5/16” (MANUAL)
ANCHOR SETTING ADAPTER A W3/8” (MANUAL)
ANCHOR SETTING ADAPTER A W1/2” (MANUAL)
ANCHOR SETTING ADAPTER A W5/8” (MANUAL)
ANCHOR SETTING ADAPTER B W1/4” (MANUAL)
ALTERNATIVE PARTS --- 5 ---5 -- 05
*
NO.
USED
1
1
1
1
1
1
1
1
1
1
DH 24PC3
OPTIONAL ACCESSORIES
ITEM
CODE NO.
NO.
642 971-800
643 971-801
644 971-802
645 971-803
DESCRIPTION REMARKS
ANCHOR SETTING ADAPTER B W5/16” (MANUAL)
ANCHOR SETTING ADAPTER B W3/8” (MANUAL)
ANCHOR SETTING ADAPTER B W1/2” (MANUAL)
ANCHOR SETTING ADAPTER B W5/8” (MANUAL)
646 944-460 TAPER SHANK DRILL BIT D11X100 1
647 944-461 TAPER SHANK DRILL BIT D12.3X110 1
648 993-038 TAPER SHANK DRILL BIT D12.7X110 1
649 944-462 TAPER SHANK DRILL BIT D14.3X110 1
650 944-500 TAPER SHANK DRILL BIT D14.5X110 1
651 944-463 TAPER SHANK DRILL BIT D17.5X120 1
652 944-464 TAPER SHANK DRILL BIT D21.5X140 1
653 320-859 SYRINGE (BLOW-OUT BULB TYPE) 1
654 303-046
655 303-044
656 303-045
BULL POINT (SDS+) 250MM (ROUND SHANK TYPE)
CHEMICAL ANCHOR ADAPTER (SDS+) 12.7MMX90L
CHEMICAL ANCHOR ADAPTER (SDS+) 19.0MMX100L
657 303-334 CHUCK HANDLE 1
658 302-976
ANCHOR SETTING ADAPTER A (SDS+) W1/4X260L
659 930-515 CHUCK WRENCH 10G 1
660 302-975
661 303-621
662 302-974
663 302-979
664 302-978
665 303-622
666 302-977
ANCHOR SETTING ADAPTER A (SDS+) W5/16X260L
ANCHOR SETTING ADAPTER A (SDS+) W3/8X160L
ANCHOR SETTING ADAPTER A (SDS+) W3/8X260L
ANCHOR SETTING ADAPTER B (SDS+) W1/4X260L
ANCHOR SETTING ADAPTER B (SDS+) W5/16X260L
ANCHOR SETTING ADAPTER B (SDS+) W3/8X160L
ANCHOR SETTING ADAPTER B (SDS+) W3/8X260L
667 303-332 HAMMER DRILL CHUCK SET 13MM 1 INCLUD. 668, 669
668 303-334 CHUCK HANDLE 1
669 303-335 RUBBER CAP 1
670 303-617
671 303-618
TAPER SHANK ADAPTER (SDS PLUS) NO. 1
TAPER SHANK ADAPTER (SDS PLUS) NO. 2
672 303-619 A-TAPER SHANK ADAPTER (SDS PLUS) 1
673 303-620 B-TAPER SHANK ADAPTER (SDS PLUS) 1
674 981-122 SPECIAL SCREW M6X22 1
675 303-625
676 303-626
677 303-627
CORE BIT SHANK (SDS PLUS) 25-38MM 105L
CORE BIT SHANK (SDS PLUS) 25-38MM 300L
CORE BIT SHANK (SDS PLUS) 45-90MM 300L
678 303-624 CHUCK ADAPTER (D) (SDS PLUS) 1
679 321-825 DRILL CHUCK AND ADAPTER SET 1 INCLUD. 680
680 303-623 CHUCK ADAPTER (G) (SDS PLUS) 1
681 306-369 DRILL BIT (SLENDER SHAFT) D3.4X90 1
682 306-368 DRILL BIT (SLENDER SHAFT) D3.5X90 1
683 306-370
ADAPTER FOR SLENDER SHAFT (SDS PLUS) 1
NO.
USED
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
DH 24PC3
ALTERNATIVE PARTS--- 6 ---
*
Printed in Japan
(050520N)
5 -- 05
Loading...