HISENSE PDP4220 User Manual

PDP COLOUR TV

USER'S MANUAL

PDP4220EU

Part No:

IES050723

The presence of certain substances can have harmful effects on the environment.

The presence of certain substances can have harmful effects on the environment.

This apparatus profits from a specific treatment of recycling for the re-use of the matters which make it

This apparatus profits from a specific treatment of recycling for the re-use of the matters which make it

up.

up.

This apparatus must be thrown only to the places envisaged. Inform near your authority to know the

This apparatus must be thrown only to the places envisaged. Inform near your authority to know the

places of electronic collection of waste.

places of electronic collection of waste.

Your sale point must collect this apparatus against the purchase of a new one for its recycling.

Your sale point must collect this apparatus against the purchase of a new one for its recycling.

The selective collection of waste electronics is to reduce the number of substance vermin not recycled

The selective collection of waste electronics is to reduce the number of substance vermin not recycled

and to thus contribute to the environment.

and to thus contribute to the environment.

OSD Language Settings

Using the OSD settings menu

OSD language

1) Press the MENU button to enter the main menu.

2) Press the [VOL+ or VOL-] button to select the item OSD settings.

CHANGE PASSWORD

3) Press the [CH+ or CH-] button to select OSD language,and press
the [VOL+]button to enter the OSD language

4) Press the [ VOL+] button to select the language what you want use.

OSD settings

OSD position

OSD timeout

OSD language

OSD lock

Transparency

The lightning flash with arrowhead symbol, within an

CAUTION

equilateral triangle is intended to alert the user to the
presence of uninsulated dangerous voltage within the
product s enclosure that may be of sufficient magnitude

'

to constitute a risk of electric shock.

CAUTION: TO REDUCE THE RISK OF ELEC­ TRIC SHOCK, DO NOT REMOVE
COVER(OR BACK).NO USER­ SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.

The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance( servicing ) instructions in
the literature accompanying the set.

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

IMPORTANT SAFEGUARD

FIRE AND SHOCK PRECAUTIONS

Adequate ventilation must be provided to prevent heat build up inside unit. Keep the inside of unit free

from foreign objects, such as hairpins, nails, paper, etc. Do not build the set into a bookcase or other
enclosures in which it would be poorly ventilated. Do not place it on carpet or a bed as low ventilation
boles could become obstructed.

Do not set liquids, including flower vases and vessels filled with chemicals or water etc., On top of the

unit as liquid could get inside the unit. If a hazardous object falls inside the TV set, unplug it immediately
and call a qualified technician for removal.

When placing or moving the TV set, take care to insure that the power cord is fitted into the allocated slot.
To avoid damage to the power cord, never allow heavy objects such as the TV set itself to be placed on
the power cord. Keep cord away from radiating appliances. Do not allow cord to become knotted or
tangled. Do not lengthen the cord. When removing the power plug from the socket, always hold onto the
plug, never pull by the cord.

This TV set shall be connected to a main socket outlet with a protective earthing contaction

The main plug and main switch should be remain readily operable after installation

No nacked flame sources, such as lighted candles, should be placed on the apparatus

Minimum distances around the apparatus for sufficient ventilation

The use of apparatus in moderate climates

WARNING

Do not remove the back cover of the TV set. Accidental contact with high voltage components could result

in electric shock. When internal adjustment is necessary, please contact your distributor.

If your set produces sound but no picture, or it emits smoke or produces a strange sound or smell, continue

operation is dangerous. Immediately turn off power and remove the power plug from the socket and
contact your distributor.

During vacation or other occasions when you will not be using the set for an extended period, remove the

power plug from the socket.

This appliance should not be operated by children or infirm persons without adequate supervision.

-1-

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

STAND IN STALLATION

Stand installation

STAND INSTALLATION

STAND INSTALLATION

If the TV is to be desktop mounted

If the TV is to be desktop mounted

1.You will Take out stand from accessory box and put aside level flat roof , and then support groupware

1.You will Take out stand from accessory box and put aside level flat roof , and then support groupware

like fig.1 using six screw A (M5X12) stand groupware. Please ensure screw to be fix closely.

like fig.1 using six screw A (M5X12) stand groupware. Please ensure screw to be fix closely.

2.You will take out TV set and put aside soft flat roof,and then take off two screw B on back cover as fig.2.

2.You will take out TV set and put aside soft flat roof,and then take off two screw B on back cover as fig.2.

3.Fixed stand use four screw A according Fig.2 fixing TV set and ensure screw to be fix closely.

3.Fixed stand use four screw A according Fig.2 fixing TV set and ensure screw to be fix closely.

STAND INSTALL SKETCH MAP

STAND INSTALL SKETCH MAP

Fig.1

Fig.2

- 2 -

Preparation for Using your new TV

Selecting a location for the TV

1)Place the TV on the floor or on a sturdy platform in a location where light does not directly hit the screen.

2)Place the TV far enough from the walls to allow proper ventilation. Inadequate ventilation may cause
overheating, which may damage the TV.
NOTE: Please contact local dealer for wall mounting.

Learning about your TV

You can operate your TV by using the buttons on the front panel or the remote control. The terminals on the
back panel provide all the connections you will need to connect other equipment to your TV.

Front Controls

- 3 -

MENU

SOURCE

VOL

CH

Preparation for Using your new TV

28

13

1211

SCAR

CVBS/RGB

ANT

S

C

A

T1

75

R

CVBS/YC

T

2

Remote Sensing Window
Power indicator

Menu button

Source

Volume up / cursor right

Volume down / cursor left

Channel up / cursor up

Channel down / cursor down

Power button (standby)

Power Switch

(ON/OFF)

14 1616

PIP

PC

AUDIO

OUT IN

AUDIO

21

VIDEO OUT

VIDEO IN

22

S

-

V

ID

E

O

17171515

AUDIO 3 AUDIO 2 AUDIO 1

AUDIO IN

L

L

R

R

18

L

R

19 20

AUDIO OUT

L

R

Scart1 connector

CATV antenna input

Scart2 connector
PIP headphone output

PC/ DVI audio input

S-VIDEO AUDIO INPUT

YPBPR/YCBCR AUDIO input

AV audio input
audio output

VIDEO OUTPUT

23

B

B

24

R

R

25 26 27

C

Power

Video input
S-video input

YPBPR/YCBCR input
VGA input

DVI input

RS232C DEBUG input

AC Power Socket

28

Spare port

Note: The above figures are for reference only, please refer to the actual units to determine their appearance.

- 4 -

Preparation for Using your new TV

Connecting your TV

Caution: Do not plug the TV in until you have finished connecting all of your equipment.

Connecting to A/V equipments

To enjoy its multimedia features, you can connect your to A/V equipments such as VCR, DVD, STB, Satellite

receiver, Camcorder, Audio amplifier etc., and select signal sources using your remote control.

TV

Connect the

devices as shown below.

1

SCAR

T1

CVBS/RGB CVBS/YC

LEFT

ANT

1

S/PDIF

RIGHT

SUBWOOFER

SCART1

CENTER

ANT IN
75

STB

S.L

S.R

SCA

SCART2

PB

Y

VGA

CV

PR

PIP

RT

2

S-VIDEO

PC

AUDIO

OUT IN

AUDIO

AUDIO 3 AUDIO 2 AUDIO 1

AUDIO IN

L

L

R

R

L

R

AUDIO OUT

L

R

VIDEO OUT

VIDEO IN

B

S

-

V

ID

E

O

R

B

R

C

Power

R

B

VCD, DVD

Notes: Modes that YPBPR/YCBCR can display include:480P/60Hz,480I/60Hz,576P/50Hz,576I/50Hz

720P/50Hz,720P/60Hz,1080I/50Hz,1080I/60Hz

Connecting to a Computer

You can use your TV as a monitor/speakers for connecting through its 15pin standard RGB
interface and PC audio interface.

Connect the devices as shown below.

your computer by

- 5-

Preparation for Using your new TV

PC/NB

To speaker

To VGA

RGB line

PC

AUDIO

IN

AUDIO 3 AUDIO 2 AUDIO 1

AUDIO IN

L

L

R

R

L

R

AUDIO OUT

L

R

VIDEO OUT

VIDEO IN

B

S

-

VID

E

O

R

B

R

Audio line

Connecting to an antenna

To enjoy the terrestrial signal transmitted by your local TV station, you need an indoor or outdoor antenna
(not supplied). Perfect picture quality requires a good signal and generally means that an outdoor antenna

must be used. The exact type and location of the antenna will depend on your particular area. Consult your

local dealer or service personnel for best advice. If you are a subscriber of your local CATV net, the outdoor

or indoor antenna is not needed. Connect the equipments as the following figure.

C

ANTENNA SOCKET

ANT 75 ¦¸W

Plug(not supplied)

Adaptor (not supplied)

- 6-

TWIN-LEAD FEEDER(300W )

Loosen the screw

COAXIAL CABLE (75W )

Insert the feeder in

The signal comes from:

An outdoor antenna
An indoor antenna
CATV net

Tighten the screw

Using the remote control

Preparing the remote control for use

Installing the remote control batteries

1. Open the battery cover on the back of the remote control.

2. Install two AAA size(1.5V) batteries. Match the + and - signs on the batteries to the signs on the battery
compartment.

3. Close the battery cover.

Note:

1.Dispose of your batteries in a designated disposal area. Do not throw batteries into fire.

2.Do not mix battery types or combine used batteries with new ones.

3.Remove dead batteries immediately to prevent battery acid from leaking into the battery compartment.

4.If you do not intend to use the remote control for a long time, remove the batteries.

5.The effective range of remote control is suggested in the figure.

M6

15

M8

15

M6

30

30

8m

6m

6m

- 7-

Using the remote control

Learning about the remote control

Channel number:

Direct

selectionchannel

Power:Power on/off

Teletext select

Recall :

Return to previous channel

P.Mode:Select picture mode

CH+:Channel up

VOL-:Volume down

CH-:Channel down

S.Mode:Select sound mode

Still:Snapshooting

Zoom:Ajust zoom ration

Video:Switch to Video source

Source:Switch input source

YPBPR:Switch to YPBPR source

PIP Source:Switch input PIP source

Sub.Code

ZoomZoom

Index

Video

Reveal

Source

Source

Still

Hold

S-Video

Cancel

YPBPR

PIP

CH-

Size

PC

Mix

Swap

CH+

Text

Display:Display current input

Teletext

VOL+:Volume up

Menu:Call up the main menu

Mute:Mute the sound

S-VIDEO:Switch to S-VIDEO source

PC:Switch to VGA/DVI source

SWAP:Exchange main source and PIP source

PIP : PIP Channel upCH+

PIP : PIP Channel downCH-

:

Mono/Stereo operation

:

- 8-

Using the TV features

Understanding the TV features

Multimedia - TV receiver, Video monitor and PC display, all in one.

Wider viewing angle, 16:9 display - 160¡ãviewing angle at typical value

Digital display device - truthfully reproducing the images, without distortion or blurring, irrespective
of magnetic or geomagnetic effect.

200 channels storage

Sleep timer

Teletext with 252 pages memory

NICAM

Two SCART interface

Multi-language OSD

Basic Operations

Power ON/OFF

1) Connect the TV to power outlet and turn on the power switch, the power
indicator will be red
will display on the screen.

2) Press the Power button on the front control or on the
the TV on standby.Press the power switch to turn off power.

3) If you decide to shut off the TV for a long time, it is recommended
that you unplug the power from the outlet.

Signal source selection

Press [CH+/CH- ] button to select TV main source input; press the [SOURCE] button to select TV ,YPBPR ,Video,
S-video,VGA,DVI, scart1,scart2 input;press the [VIDEO] button to select VIDEO input; press the
[S-VIDEO] button to select S-VIDEO input; press the [ YPBPR button to select YPBPR input; press the [PC] button
to select VGA or DVI input;
press the [PIP SOURCE] button to select TV ,YPBPR ,video,vga,dvi,scart1,scart2 input of pip
source input;press [PIP CH+/CH- ] button to select TV input;
press the [SWAP] button to swap main source input and pip source input.

and then turn blue.Several seconds later, TV picture

remote control to make

POWER
INDICATOR

MENU

SOURCE

VOL

CH

POWER BUTTON
(STANDBY)

Select channels by [CH+/CH-]

Select channels by [CH+/CH-]

- 9-

Using the TV features

Select channels by [CH+/CH-]

You can also use[CH+ / CH-] to select channels. ndicates channel number increase; indicates channel

[CH+] i [CH-]

number decrease.

Select channels by numbers

To select a channel : Press the channel numbers in series to select channel directly.

For example, to seclect channel 120,

Press the button 1, and 1 will display on the top right corner of the screen,

then press the button 2, 12 will display, press the button zero, you can enjoy the program of channel 120.

NOTE:

1) When you changing the channel, the sound state graphics can be displayed below the channel number. There

are 3 sound states in this TV. If the sound is mono, the graphics is , If the sound is stereo, the graphics is
If the sound is NICAM dual I/II, the graphics is .

Which indicate preset of picture system and sound system.

When you changing the channel, the sound of current channel will be firstly changed to stereo or NICAM dual I

2)

There are two symbol at right of the sound state graphics,

according to the sound state of current channel. You can press the I/II button on the remote control to change
current sound type.

Adjust Volume

When menu is not displayed on the screen, press to adjust the volume.[VOL+ or VOL-]

Use [Recall] button
Power ON/OFF

Press the [ Recall ] button repeatedly to alternate between the present channel and the previous channel.

Display channel number

Press [Display] button to display the present channel number, but it will also disappear 3 seconds after your pressing.

Select picture modes

You can select the picture mode from among three preset modes and one user-set
mode. Press the [ P.mode ] button repeatedly to select the desired picture mode.

Normal

User

Soft

Bright

Select sound modes

You can select the sound mode from among three preset modes and one user-set
mode. Press the [ S.mode ] button repeatedly to select the desired sound mode.

Use [Still] button

Speech

Nomal

User

Music

Press the [ Still ] button to snapshot the present picture, and press again to return to normal watching.

Use [ Zoom ] button

Press the [ Zoom ] button to adjust the screen aspect ratio and zoom ratio

Mute function

Press [ Mute ] button repeatedly to switch between mute and unmute mode.

- 10-

Using the TV features

Using the TV settings menu

Program

1) Press the [MENU] button to enter the main menu.

2) Press the button to select the item .

3) Press the button to select Program.

4) Press the button to select the present channel.

Sound system

You can set sound syetem.

1) Press the [MENU] button to enter the main menu.

2) Press the button to select the item

3) Press the button to select sound system.and press
the [VOL+] button to enter sound system

4) Press the button to switch among AUTO D/K B/G L/L`

[VOL+ or VOL-] TV settings

[CH+ or CH-]

[VOL+ or VOL-]

[VOL+ or VOL-] TV settings

[CH+ or CH-]

[VOL+ ] I

Tv settings

Program

Sound system

Auto search

Manual search

Fine tune

Skip

Program edit

AUTO-Search

1) Press the MENU button to enter the main menu.

2) Press the [VOL+ or VOL-] button to select the item TV settings.

3) Press the [CH+ or CH-] button to select Auto search and press
the [ VOL+ ] button to enter Auto search .

4) Press the [ VOL+ ] button to switch among Normal and Auto +L/L`.

Notes:If you want to select L/L` and else sound system,
please select [auto search +L/L`] as right shown.

Manual search

1) Press the MENU button to enter the main menu.

2) Press the [VOL+ or VOL-] button to select the item TV settings.

3) Press the [CH+ or CH-] button to select Manual search.

4) Press the [ VOL+ or VOL-] button to start Manual searching.

Fine tune

1) Press the MENU button to enter the main menu.

2) Press the [VOL+ or VOL-] button to select the item TV settings.

3) Press the [CH+ or CH-] button to select Fine tune.

4) Press the [ VOL+ or VOL-] button to start Fine searching.

Tv settings

Program

Sound system

Auto search

Manual search

Fine tune

Skip

Program edit

Normal

Auto +L/L`

Skip

1) Press the [MENU] button to enter the main menu.

2) Press the button to select the item

3) Press the button to select Skip.

4) Press the button to skip or unskip the present channel.

[VOL+ or VOL-] TV settings

[CH+ or CH-]

[VOL+]
NOTE: The 'skipped' channels cannot be accessed by , but you can access them by digit (direct select)
button.

[CH+ or CH-]

-11-

Using the TV features

Program edit

1) Press the MENU button to enter the main menu.

2) Press the [VOL+ or VOL-] button to select the item TV settings.

3) Press the [CH+ or CH-] button to select edit.

4) Press the [ VOL+] button to start edit.

5)Program

edit can carry out program1 and program2 to be interchanged by the button [SWAP],or copy program1 to

program2 by the button [COPY].

Using the Picture menu

PROGRAM
Adjust picture settings

1) Press the [MENU] button to enter the main menu.

2) Press the button to select the item Picture
Parameters.

3) Press the button to select the item you want to adjust.

4) Press the button to adjust the level.

5) The adjusted data is stored automatically in the user mode.
NOTE : The Colour temp is only to adjust in the PC mode.
.

[VOL+ or VOL-]

[CH+ or CH-]

[VOL+ or VOL-]

program

program

Picture parameters

Brightness

Contrast

Saturation

Hue

Colour temp

Sharpness

Using the Audio settings menu

Adjust audio settings

1) Press the [MENU] button to enter the main menu.

2) Press the button to select the item Audio settings.

3) Press the button to select the item you want to adjust.

4) Press the button to adjust the level.

5) The adjusted data is stored automatically in the user mode.

[VOL+ or VOL-]

[CH+ or CH-]

[VOL+ or VOL-]

Audio settings

Bass

Treble

Balance

Sorround

Using the PIP menu

1) Press the MENU button to enter the main menu ,press the
[VOL+ or VOL-]

select the Picture in picture.

2) Press the

press the Press the

[CH+ or CH-]

button to select the Off/Small/Medium/Large/PBP .

3) Press the button to select the PIP , and

press the button to enter the PIP , Press the

[CH+ or CH-]

button to select the pip .

4) Press the button to select the PIP position or PIP

to

[CH+ or CH-]

[ VOL+]

button to enter the PIP size,

[CH+ or CH-]

[ VOL+]

[CH+ or CH-]

button to select the PIP size, and

saturation

saturation

saturation

brightness or PIP contrast, press the [VOL+ or VOL-] button to adjust the value.

Note: 1) When main picture is TV/ VIDEO/SCART/S-VIDEO. pip picture is HDTV/VGA.

2) When main picture is HDTV/VGA. pip picture is TV/ VIDEO ./SCART

Picture in picture

PIP position

PIPsize

PIP brightness

PIP contrast

PIP saturation

Volume

-12 -

Using the TV features

Using the OSD settings menu

OSD position

OSD settings

1) Press the [MENU] button to enter the main menu.

2) Press the [VOL+ or VOL-] button to select the item OSD

settings.

3) Press the [CH+ or CH-] button to select OSD position

4) Press the [VOL+ or VOL- ] button to

adjust the OSD POSITION

OSD timeout

OSD position

OSD timeout

OSD language

OSD lock

Transparency

1) Press the [MENU] button to enter the main menu.

2) Press the button to select the item OSD
settings.

3) Press the button to select OSD timeout

4) Press the button to

[VOL+ or VOL-]

[CH+ or CH-]

[VOL+ or VOL- or CH+ or CH-]

adjust the OSD TIMEOUT

OSD language

1) Press the MENU button to enter the main menu.

2) Press the [VOL+ or VOL-] button to select the item OSD settings.

CHANGE PASSWORD

3) Press the [CH+ or CH-] button to select OSD language,and press the [VOL+]]button
to enter the OSD language

4) Press the [ VOL+] button to select the language what you want use.

OSD lock

1) Press the MENU button to enter the main menu.

2) Press the [VOL+ or VOL-] button to select the item OSD settings.

CHANGE PASSWORD

3) Press the [CH+ or CH-] button to select OSD lock ,and press the [VOL+]button
to enter the OSD lock

4) Press the [ VOL+] button to select Yes, then OSD locked.

At that time you press MENU again,the screen will display as right shown.
Notes: If you want to unlock the OSD, please press [9] when the screen
display as right shown.

Transparency

1) Press the MENU button to enter the main menu.

2) Press the [VOL+ or VOL-] button to select the item OSD settings

3) Press the [CH+ or CH-] button to select Transparency

4) Press the [ VOL+ or VOL-] button to adjust the ITEM

-13 -

OSD locked!

Using the TV features

Using the General settings menu

Colour system

You can set colour syetem.

1) Press the [MENU] button to enter the main menu.

2) Press the button to select the item

[VOL+ or VOL-]

General settings

3) Press the button to select colour system and press

[CH+ or CH-]

the [VOL+] button to enter colour system

4) Press the button to switch among Auto, Pal ,Secam.

[VOL+ ]

Noise reduce

1) Press the MENU button to enter the main menu.

2) Press the [VOL+ or VOL-] button to select the item General settings

3) Press the [CH+ or CH-] button to select Noise reduce.

4) Press the [ VOL+ ] button to enter the Noise reduce.

5) Press the [ CH+ or CH-] button to select Low / Middle / High .

Deinterlace

General settings

Language english

Colour system

Noise reduce

Deinterlace

Factory reset

Sleep timer

1) Press the MENU button to enter the main menu.

2) Press the [VOL+ or VOL-] button to select the item General settings

3) Press the [CH+ or CH-] button to select Deinterlacer

4) Press the [ VOL+ ] button to enter the Deinterlacer

5) Press the [ CH+ or CH-] button to select the feature

Factory reset

1) Press the MENU button to enter the main menu.

2) Press the [VOL+ or VOL-] button to select the item General settings

3) Press the [CH+ or CH-] button to select Factory reset.

4) Press the [ VOL+-] button to select Yes or No .

Sleep timer

1) Press the MENU button to enter the main menu.

2) Press the [VOL+ or VOL-] button to select the item General settings

3) Press the [CH+ or CH-] button to select Sleep timer

4) Press the [ VOL+-] button to adjust the Sleep timer

-14-

Using the TV features

Using the PC menu

1) Press the MENU button to enter the main menu.

PC Parameters

2) Press the [VOL+ or VOL-] button to select the item
PC Parameters.

3) Press the [CH+ or CH-] button to select the item you
want to adjust.

NOTE: 1)The menu is useful only on VGA/DVI and HDTV mode.
It is useless in others mode.

2)

The button [AUTO] is used to adjust position of picture
automatic and it is effective only on mode.
The button [POSITION] is used to adjust the position of
picture.
The button [CLOCK] and [PHASE] can adjust quality of picture minutely,
and they are used less.

3) In HDTV mode ,Clock can not be select.

4) In DVI mode,I/P info can be select only.

VGA

Auto

LANGUAGE ENGLISH

Clock

Phase

Position

I/p info

Teletext Operations

Selecting teletext mode

Select the channel that is broadcasting the desired Teletext program.
Press [ TEXT ] button and alternate between Teletext mode and normal mode.
Note: All the operations below should be under the Teletext mode except TIME operation.

Page selection

You can directly input your desired page number by pressing [0-9] buttons.
You can sequentially read pages by pressing [CH+ or CH-] button.

Hold

Some Teletext information is contained on more than one page, the pages automatically changing
after a given reading time.
Press [ S-Video ] button to stop the page changing.
Press [ S-Video ] button again to allow the page to change.

Reveal

Some Teletext pages contain quiz or questions with hidden answers.
Press the [ Source ] button to see the answers.
Press the [ ] button again to hide the answers.Source

Cancel

When a page is selected in Teletext mode it may take some time before it becomes available.
Press the [ YPbPr ] button to switch to the TV mode.
When the required page is found, the page number will appear at the top of the TV picture,
press the [ YPbPr ] button to return to the selected Teletext page.
Note: You can not change TV program while in this mode.

-15-

Using the TV features

Teletext Operations

Sub code

Some Teletext pages contain sub page that require you to input the sub code.
Press [ Zoom ] button until ***|**** is displayed, and enter last four-digit sub code for the sub page you need.

Mix

You can mix Teletext with TV pictures, which means transparent teletext.
Press [ Swap ] to mix, and press [ Swap ] again to cancel the mixed effect.

Size (top/bottom/full)

Press the [ PC ] button to display the TOP HALF of the page.
Press again to display the BOTTOM HALF of the page.
Press again to return to a FULL PAGE display.
Note: Changing pages reverts to a FULL PAGE display.

Index

Teletext index page guides you quickly to your desired page.
Press [ Vedio ] button to enter index page.

Fast text

The RED, GREEN, YELLOW & CYAN buttons are used for quick access to colour coded pages
transmitted by FAST TEXT broadcast.

-16-

Appendix

The SCART interface

Scart Connector Pinout Details

Pin Signal Signal level Impedance

1 Audio output B (right) 0.5V rms <1kohm

Also known as Peritel, this standard provides a cheap multi-signal connector

to domestic TV and other video equipment.

Arrangement 1 is the original and allows for composite video input/output,
RGB inputs and stereo audio input/output.

Arrangement 2 allows for composite video input/output,and stereo audio
input/output.
Cation:The output of video and audio are always from turner of R F.
Arrangement 3 allows for composite video input, S-Video inputs,and stereo
audio input/output.
TV can auto check aspect ratio in scart.

SCART arrangement 1

2 Audio input B (right) 0.5V rms >10kohm

3 Audio output A (left) 0.5V rms <1kohm

4 Ground (audio) - -

5 Ground (blue) - -

6 Audio input A (left) 0.5V rms >10kohm

7 Blue input 0.7V 75ohms

8 Function select (AV control)

9 Ground (green) - -

10

-

11 Green input 0.7V 75ohms

12

-

13 Ground (red) - -

14 Ground (blanking) - -

15 Red input 0.7V 75ohms

16 RGB switching control

High (5-12V) - AV mode

Mid(5-8V)-Wide-screen

Low (0-2V) - TV mode

- -

- -

High (1-3V) - RGB

Low (0

-0.4V) - Composite

>10kohm

75ohms

17 Ground (video input & output) - -

18 Ground(RGB

19 Video output (composite) 1V including sync 75ohms

20 Video input (composite) 1V including sync 75ohms

21 Common ground (shield) - -

Switching

Control)

- -

-17 -

Appendix

Pin Signal Signal level Impedance

1 Audio output B (right) 0.5V rms <1kohm

2 Audio input B (right) 0.5V rms >10kohm

3 Audio output A (left) 0.5V rms <1kohm

4 Ground (audio) - -

5 Ground - -

6 Audio input A (left) 0.5V rms >10kohm

7 - - -

8

9 Ground - -

SCART arrangement 2

Function select (AV control)

High

(5-12V)

Mid(5-8V)-Wide-screen

Low (0-2V) - TV mode

- AV mode

>10kohm

10

11 - - -

- -

12

13 Ground - -

14 Ground (blanking) - -

-

15

16 - - -

17 Ground - -

18 - -

Ground

19

Video output

20

Video input

21 Common ground (shield) - -

-

0.3V

1V including sync

1V including sync

---

75ohms

75ohms

75ohms

WARNING: Do NOT attempt to work on ANY equipment unless you KNOW what you are doing.

Notes: Y/C can not be displayed in the PIP source.

Cleaning and care

WARNING: Do not try to remove the cabinet back. Refer servicing to qualified service technicians.

To clean the TV screen:

1) Unplug the TV to avoid possible shock hazard.

2) Use a clean cellulose sponge or chamois cloth dampened with a solution of mild detergent and warm
water to clean the TV screen and trim. Do not use too much water as water spilled into the cabinet
can cause damage to the TV.

3) Wipe off any excess moisture with a clean dry cloth.

4) Polish the cabinet with a quality furniture polish to maintain the finish and appearance of the cabinet.

Caution: Never use strong solvents such as thinner, benzene, or other chemicals on or near the cabinet.
These chemicals can damage the finish of the cabinet.

-18 -

Appendix

Troubleshooting

Before calling a service technician, please check the following table for a possible cause of the problem and
some solutions.

Symptoms

TV will not turn on

No picture, no sound

No sound, picture OK

Poor sound, picture OK

Poor picture, sound OK

Possible Solutions

Make sure the power cord is plugged in, then press [Power].
The remote control batteries may be dead. Replace the batteries.

Check if you have set the off timer.
Check the antenna/cable connections.
Press [Display] to see if you have select the right signal source.

The sound may be muted. Press on the remote control or .
The station may have broadcast difficulties. Try another channel.

Check the speakers cable connections.

The station may have broadcast difficulties. Try another channel
Check the speakers cable connections.

Check the antenna connections.
The station may have broadcast difficulties. Try another channel.
Adjust the picture from the menu.

[ >]

Unable to select a certain channel

Poor colour or no colour

The remote control does not operate

Abnormal TV pictureAbnormal TV picture

Customer important notice: When the TV can not be operationed in some special situation,please unplug the power and restart.

The channel may be skipped. See SKIP on page 11.

The station may have broadcast difficulties. Try another channel.
Adjust the HUE and COLOUR in the menu.

There may be an obstruction between the remote control and the
remote control sensor.
The batteries may be installed with a wrong polarity.
The remote control batteries may be dead. Replace the batteries.
Check if you have entered Teletext mode. Press [ Text ] to quit.

Maybe TV signal isn't so good, you can try Fine tune to adjust.
See page 11

-19 -

Specifications

PDP4220EU

LCD panel

Television system

Channel coverage

Analog RGB mode

Y PB/CB PR/CR mode

Resolution

Contrast

Brightness

Viewing angle

Power source

Power consumption

Audio output

42 inch PDP

Multi- system(PAL,SECAM)

VHF-L: E2-S8
VHF-H: S9-S37
UHF: S38-E69

640X480/60Hz,800X600/60Hz,1024X768/60Hz,1280X1024/60Hz

480I/60Hz,480P/60Hz,576P/50Hz,720P/50Hz,720P/60Hz,
1080I/50Hz,1080I/60Hz

852X480

10000:1

1500cd/m

oo

160 (H)/160 (V)

2

AC100V--240V, 50/60Hz

280W

7W+7W

5W+5W

Connection interface

Dimensions

Weight

Supplied accessories

RF input: 1 CATV R antenna input

FF

VIDEO input: 1 AV input
1 s-video input
1 Y PB PR input
GRAPHIC input: 1Analog RGB 15pin(VGA) input
1 Digital RGB(DVI-D) input
AUDIO input: 1 AV audio
1PC/ DVI audio
1 S-video audio
1Y PB PR audio
AUDIO output: 1 audio output
1 PIP audio output
Video output 1 video output
SCART : SCART1 ( forCVBS, RGB andCANAL+ )
SCART2 ( for CVBS and Y/C)
OTHER: 1 RS232C ( for software updating )

1242mmX750mmX92mm

( LXWXH )

35kg

Remote control, AC Power cord, Batteries

Design and specifications are subject to change without notice.

-20-

Appendix

PDP Wall-mounting Bracket Installation Guide

READ CAREFULLY BEFORE INSTALLATION!
THE INSTALLATION GUIDE SHOULD BE RETAINED FOR FUTURE REFERENCE.
Caution:

1. Do NOT attempt to install the TV by yourself to avoid mistakes or hazard. Refer all
installation to qualified servicing personnel.

2. Do NOT install the TV on a wall aslope or a wall that makes the TV screen sloping
over 25o off plumb line. Otherwise, it may cause tumble or injury.

3. Refer all installation to qualified servicing personnel.

4. One must follow the instructions in this guide to correctly install the TV.

5. It requires more than one person to install the TV.

6. Before installation, examine whether the wall conforms to the specifications and
whether the supplied parts can be fixed on it. The wall for mounting should sustain
the weight of TV and speakers, e.g. cement wall or brick wall. Do NOT attempt to
install the TV on a flexible wall such as sand wall or plaster wall, unless the bolt are
fixed on an area with standard building rigidity which sustains the weight of the TV
and speakers. If the rigidity of the wall can not be measured, every mounting hole
should sustain a frontal force of over 100N and a shearing force of over 200N.

7. Use the specified electric drill and drill bit for drilling. The drilling holes should
conform to the specifications.

8. To avoid fire and shock, do NOT place radiator, heater or humidifier below the
installed TV.

9. The TV should be kept away from moisture, sensors and power line. The TV should
be kept away from impact and vibration.

10. Ensure that the power supply be disconnected before installation for fear of fire
and shock.

Wall-mounting Installation Steps:

1. Take out the brackets from the package, and check if there are serious defects

(e.g. infirm juncture).

2. Adjust the bracket to the desired angle. Use the bolts 2 to adjust the angle by
meeting holes of column beam 8 and holes of lever 5

3. Drill locating holes in the specified dimension in a vertical wall of concrete or brick.
The hole size should be 11mm. The hole depth should accommodate the
expanding tube of the bolt.

4. Fix the bolts into the drilled holes in step3, and then cover each bolt with a metal
washer. Meet the four mounting holes in the bracket with the four bolts in the wall,
cover each bolt with a metal washer, and then fasten with a screw nut. Check its
rigidity by pulling the bracket.

5. Fix the fixture disk 4 to the back cover of the TV using four bolt 3(M8X45).

6. Wall-mount the TV by putting the four fixture disks into the four mounting holes A.

7. If the customer is not satisfied with the mounting angle, take down the TV and
adjust the angle before re-mounting.

8.

After wall-mounting the TV, use bolts 2 to fix the fixture disks for fear of accidental

slide.

-21 -

Appendix

-22-