Hilti TE60, TE60-ATC User Manual

TE 60/
TE 60-ATC

Bedienungsanleitung de
Operating instructions en
Mode d’emploi fr
Istruzioni d’uso it
Manual de instrucciones es
Manual de instruções pt
Gebruiksaanwijzing nl
Brugsanvisning da
Bruksanvisning sv
Bruksanvisning no
Käyttöohje fi

ΟΟδδηηγγιιεεςς χχρρηησσεεωωςς

el
Instrukcija lt
Lietoßanas pamåcîba lv
Kasutusjuhend et

1

2 3

4 5

6 7

8

ORIGINAL OPERATING INSTRUCTIONS

TE 60 / TE 60‑ATC / TE 60T / TE 60T‑ATC
combihammer

It is essential that the operating instructions
are read before the power tool is operated
for the first time.

Always keep these operating instructions
together with the power tool.

Ensure that the operating instructions are
with the power tool when it is given to other
persons.

Contents Page

1. General information 17

2. Description 18

3. Insert tools, accessories 20

4. Technical data 21

5. Safety instructions 23

6. Before use 25

7. Operation 26

8. Care and maintenance 28

9. Troubleshooting 29

10. Disposal 30

11. Manufacturer’s warranty - tools 31

12. EC declaration of conformity 31

1 These numbersrefer to the corresponding illustra­tions. The illustrations can be found on the fold-out
cover pages. Keep these pages open while studying
the operating instructions.
In these operating instructions, the designation “the
power tool” always refers to the TE 60 / TE 60-ATC /
TE 60T / TE 60T-ATC combihammer.

Parts, operating controls and indicators 1

Chuck

@

Function selector switch

;

Control switch

=

Supply cord

%

Side handle

&

Depth gauge

(

Service indicator

)

Theft protection indicator (option)

+

Control switch lock

§

Reduced-power indicator

/

Power reduction button (50% power)

:

en

1. General information

1.1 Safety notices and their meaning

DANGER

Draws attention to imminent danger that could lead
to serious bodily injury or fatality.

WARNING

Draws attention to a potentially dangerous situation
that could lead to serious personal injury or fatality.

CAUTION

Draws attention to a potentially dangerous situation
that could lead to slight personal injury or damage to
the equipment or other property.

NOTE

Draws attention to an instruction or other useful
information.

1.2 Explanation of the pictograms and other
information

Warning signs

General
warning

Warning:
electricity

Warning: hot

surface

17

Obligation signs

Wear eye
protection

en

Wear
breathing
protection

Symbols

Read the

operating

instructions

before use

Chiseling Chisel position

Wear a hard

hat

Return waste

material for

recycling.

adjustment

Wear ear

protection

Drilling
without

hammering

Volts Amps

Wear

protective

gloves

Hammer

drilling

Watts Alternating

Revolutions

per minute

Lock symbol

current

Diameter Double

Hertz Rated speed

insulated

under no load

Equipped with

theft

protection

system

Location of identification data on the power tool

The type designation can be found on the type iden­tification plate and the serial number on the side of
the motor housing. Make a note of this data in your
operating instructions and always refer to it when
making an enquiry to your Hilti representative or
service department.

Type:

Generation: 02

Serial no.:

2. Description

2.1 Use of the product as directed

The power tool is an electrically-powered combihammer with pneumatic hammering mechanism. The ATC
(Active Torque Control) function of the TE 60-ATC / TE 60T‑ATC provides greater operating comfort while
drilling.
The tool is designed for drilling in concrete, masonry, metal and wood and can also be used for chiseling.
The power tool is equipped with electronic overload protection. If the power tool is overloaded for a continuous
period, motor speed will be reduced automatically and, if necessary, the motor may be stopped completely.
When the control switch is released and then pressed again, the motor immediately regains full power. When
restarting, care should thus be taken to ensure that the power tool is held securely with both hands.
Under certain conditions, the power tool is suitable for use for mixing (see “Tools, accessories” and
“Operation”).
The power tool is designed for professional use and may be operated, serviced and maintained only by trained,
authorized personnel. This personnel must be informed of any special hazards that may be encountered. The
power tool and its ancillary equipment may present hazards when used incorrectly by untrained personnel or
when used not as directed.

18

Working on materials hazardous to the health (e.g. asbestos) is not permissible.
The working environment may be as follows: construction site, workshop, renovation, conversion or new
construction.
The power tool may be used only in a dry environment.
Take the influences of the surrounding area into account. Do not use the power tool where there is a risk of
fire or explosion.
The power tool may be operated only when connected to a power supply providing a voltage and frequency in
compliance with the information given on its type identification plate.
Observe the information printed in the operating instructions concerning operation, care and maintenance.
To avoid the risk of injury, use only genuine Hilti accessories and insert tools.
Modification of the power tool or tampering with its parts is not permissible.

2.2 Chuck

TE‑Y (SDS-max) quick-change “click” chuck (TE 60 / TE 60‑ATC)
TE‑T (SDS-top) quick-change “click” chuck (TE 60T / TE 60T‑ATC)

2.3 Switches

Speed-control switch for smooth hole-starting / chiseling
Function selector switch: Hammer drilling, rotary-only drilling, chiseling, chisel blade position (24-way
adjustment)
Choice of full or reduced (50%) power
Control switch lockable for chiseling

2.4 Grips

Vibration-absorbing, pivotable side handle
Vibration-absorbing grip

2.5 Protective devices

Mechanical safety clutch
Electronic restart interlock to prevent the power tool starting unintentionally after an interruption in the electric
supply (see section “Troubleshooting”).
ATC Active Torque Control (TE 60‑ATC / TE 60T‑ATC)

en

2.6 Lubrication

Gearing and hammering mechanism with separate lubrication chambers

2.7 Active Vibration Reduction

The power tool is equipped with an AVR Active Vibration Reduction system which reduces vibration significantly
compared to power tools without AVR.

2.8 TPS Theft Protection System (optional)

The power tool may be equipped with the TPS Theft Protection System as an option. If the power tool
is equipped with this feature, it can be unlocked and made ready for operation only through use of the
corresponding TPS key.

2.9 LED indicators

Service indicator LED (see section “Care and maintenance / service indicator”)
Theft protection system indicator (optional) (see section “Operation / TPS theft protection system (optional)”)

19