Hilti HDA Removal Tool INSTALLATION
M
H
DA-P
H
DA-T
TE-C
1
2
echanical Anchoring Systems
4.3.1 HDA Removal Tool
4.3.1.6 HDA Removal
The Hilti HDA Removal Tool is designed to remove the Hilti
HDA Heavy Duty Mechanical Anchor when installed in
standard applications in accordance with Hilti guidelines.
Removal Instructions
1. Remove the nut and washer
from the threaded rod, (also
remove fastening part for
HDA-P applications).
2. Push back the grip (against
this spring pressure).
3. Allow the two drive lugs to
engage the groove in the
anchor sleeve using a slight
twisting movement of the
grip. Release the grip.
4. Insert the adapter (drive) into
the drill chuck and lock
(TE 25 recommended).
Important:
• Switch off the hammer-
• Use lo
Product Features
• Complete removal of HDA design anchors for temporary
applications
• The removal process strips the threads to prevent reuse
of anchors for safety purposes
• Suitable for all rotary hammers with TE-C style chucks
ing action (the removal
tool will be permanentl
ged if this step
dama
is neglected.).
w speed
TE 25).
(setting 1 f
or the
5. Put adapter (drive) onto the
threaded spindle of the
removal tool and switch
on the drill.
6. The anchor sleeve will be
extracted.
y
7. Disenga
from the g
up and twisting the g
ge the drive lugs
roove by lifting
rip.
8. To return the tool to its start-
ing position, put the adapter
(drive) on the other end of
the threaded spindle.
9. Switch on the hammer drill
until the adapter stop reaches the removal tool.
Removal Tool with Adapter
194 Hilti, Inc. (US) 1-800-879-8000 | www
.us.hilti.com
Item No. Description Qty/Pkg Anchor Sizes
00333433 TE-C-HDA-RT 20-M10 1 HDA M10
00333434
TE-C-HDA-R
T 22-M12
00333435 TE-C-HDA-RT 30-M16 1 HDA M16
00339273 TE-C-HDA-RT 37-M20 1 HDA M20
I en español 1-800-879-5000 I Hilti (Canada) Corp. 1-800-363-4458 I www
.ca.hilti.com
1
I Pr
Applicable
HDA M12
echnical Guide 2006
oduct T
Loading...