Hilti DC-EX 125/5"M Operating Instructions Manual
DC-EX 125/5"M
English
Printed: 08.06.2018 | Doc-Nr: PUB / 5128910 / 000 / 02
Printed: 08.06.2018 | Doc-Nr: PUB / 5128910 / 000 / 02
English 1
1 Information about the documentation
1.1 About this documentation
• Read this documentation before initial operation or use. This is a prerequisite for safe, trouble-free
handling and use of the product.
• Observe the safety instructions and warnings in this documentation and on the product.
• Always keep the operating instructions with the product and make sure that the operating instructions
are with the product when it is given to other persons.
1.2 Explanation of symbols used
1.2.1 Warnings
Warnings alert persons to hazards that occur when handling or using the product. The following signal words
are used:
DANGER
DANGER !
▶ Draws attention to imminent danger that will lead to serious personal injury or fatality.
WARNING
WARNING !
▶ Draws attention to a potential threat of danger that can lead to serious injury or fatality.
CAUTION
CAUTION !
▶
Draws attention to a potentially dangerous situation that could lead to slight personal injury or damage
to the equipment or other property.
1.2.2 Symbols in the documentation
The following symbols are used in this document:
Read the operating instructions before use.
Instructions for use and other useful information
Dealing with recyclable materials
Do not dispose of electric equipment and batteries as household waste
1.2.3 Symbols in the illustrations
The following symbols are used in illustrations:
These numbers refer to the corresponding illustrations found at the beginning of these operating
instructions
The numbering reflects the sequence of operations shown in the illustrations and may deviate
from the steps described in the text
Item reference numbers are used in the overview illustrations and refer to the numbers used in
the product overview section
This symbol is intended to draw special attention to certain points when handling the product.
Wireless data transfer
Printed: 08.06.2018 | Doc-Nr: PUB / 5128910 / 000 / 02
2 English
1.3 Product-dependent symbols
1.3.1 Symbols
The following symbols are also used:
Wear protective goggles while working with the tool.
Wear ear protection while working with the tool.
Wear protective gloves while working with the tool.
1.4 Product information
products are designed for professional users and only trained, authorized personnel are
permitted to operate, service and maintain the products. This personnel must be specifically informed about
the possible hazards. The product and its ancillary equipment can present hazards if used incorrectly by
untrained personnel or if used not in accordance with the intended use.
The type designation and serial number are printed on the rating plate.
▶ Write down the serial number in the table below. You will be required to state the product details when
contacting Hilti Service or your local Hilti organization to inquire about the product.
Product information
Hood DC-EX 125/5"M
Generation: 01
Serial no.:
2 Safety
2.1 Safety instructions
WARNING! Read all safety precautions and instructions in this documentation and the safety
instructions of the approved tools. Failure to follow the safety instructions and other instructions can result
in electric shock, fire and/or serious injury.
Keep all safety precautions and instructions for future reference.
▶ Wear personal protective equipment and always wear protective goggles.
▶ Use respiratory protection to keep residual dust away from the face and airways when working.
▶ Even when the hood is fitted, always use the side handle of the approved Hilti power tool.
▶ Wear protective gloves when changing the accessory tool.
Printed: 08.06.2018 | Doc-Nr: PUB / 5128910 / 000 / 02
Loading...