Hilti DAG 500-D User Manual
DAG 500-D
Operating instructions en
Mode d’emploi fr
Manual de instrucciones es
Printed: 09.12.2013 | Doc-Nr: PUB / 5164435 / 000 / 00
1
This Product is Certified
Ce produit est homologué
Producto homologado por
Este produto está registrado
C US
Printed: 09.12.2013 | Doc-Nr: PUB / 5164435 / 000 / 00
2 3
4 5
6
7
Printed: 09.12.2013 | Doc-Nr: PUB / 5164435 / 000 / 00
8
10
9
PP
PP
11
Printed: 09.12.2013 | Doc-Nr: PUB / 5164435 / 000 / 00
12
13
Printed: 09.12.2013 | Doc-Nr: PUB / 5164435 / 000 / 00
ORIGINAL OPERATING INSTRUCTIONS
DAG 500‑D angle grinder
It is essential that the operating instructions
are read before the power tool is operated for
the first time.
Always keep these operating instructions together with the power tool.
Ensure that the operating instructions are
with the power tool when it is given to other
persons.
Contents Page
1 General information 1
2Description 2
3Consumables 4
4 Technical data 5
5 Safety instructions 6
6Beforeuse 10
7 Operation 11
8 Care and maintenance 12
9 Troubleshooting 13
10 Disposal 13
11 Manufacturer’s warranty - tools 13
1 General information
1.1 Safety notices and their meaning
DANGER
Draws attention to imminent danger that will lead to
seriousbodilyinjuryorfatality.
WARNING
Draws attention to a potentially dangerous situation that
could lead to serious personal injury or fatality.
CAUTION
Draws attention to a potentially dangerous situation that
could lead to slight personal injury or damage to the
equipment or other property.
NOTE
Draws attention to an instruction or other useful information.
1 These numbers refer to the corresponding illustrations. The illustrations can be found on the fold-out cover
pages. Keep these pages open while studying the operating instructions.
In these operating instructions, the designation “the
power tool” always refers to the DAG 500-D angle grinder.
Operating controls and components 1
Ventilation slots
@
Hold-to-run switch
;
Side handle
=
Spindle lockbutton
%
Guard release button
&
Spindle
(
Guard
)
Clamping flange
+
Cutting disc / grinding disc (not supplied)
§
Clamping nuts
/
Wrench
:
Safety release
·
1.2 Explanation of the pictograms and other
information
Warning signs
General
warning
Warning:
electricity
Warning: hot
surface
en
1
Loading...