Hikvision EKI-K41B44W Quick Start Guide
EKI-K41B44W Wi-Fi Kit
NVR: DS-7104NI-K1/W/M NVR
Cameras: DS-2CV1041G1-IDW
Quick Start Guide
© 2020 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved.
This Manual is the property of Hangzhou Hikvision Digital Technology Co., Ltd. or its affiliates (hereinafter
referred to as "Hikvision"), and it cannot be reproduced, changed, translated, or distributed, partially or
wholly, by any means, without the prior written permission of Hikvision. Unless otherwise expressly stated
herein, Hikvision does not make any warranties, guarantees or representations, express or implied,
regarding to the Manual, any information contained herein.
About this Manual
The Manual includes instructions for using and managing the Product. Pictures, charts, images and all
other information hereinafter are for description and explanation only. The information contained in the
Manual is subject to change, without notice, due to firmware updates or other reasons. Please find the
latest version of this Manual at the Hikvision Website (http://www.hikvision.com/).
Please use this Manual with the guidance and assistance of professionals trained in supporting the
Product.
Trademarks Acknowledgement
and other Hikvision trademarks and logos are the properties of Hikvision in various
jurisdictions.
Other trademarks and logos mentioned are the properties of their respective owners.
LEGAL DISCLAIMER
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT DESCRIBED, WITH
ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED “AS IS” AND “WITH ALL FAULTS AND ERRORS.”
HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY,
SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR
OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR
INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS
INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON
BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH
THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR
LOSS.
YOU ACKNOWLEDGE THAT THE NATURE OF INTERNET PROVIDES FOR INHERENT SECURITY RISKS, AND HIKVISION
SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES
RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS INFECTION, OR OTHER INTERNET SECURITY RISKS;
HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.
YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE SOLELY
RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. ESPECIALLY, YOU ARE
RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF THIRD
PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA
PROTECTION AND OTHER PRIVACY RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES,
INCLUDING THE DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR
PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR
EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATTER PREVAILS.
QSG EKI-K41B44W Kit 110520NA 2
Regulatory Information
FCC Information
Please take attention that changes or modification not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
FCC Compliance: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
●
Reorient or relocate the receiving antenna.
●
Increase the separation between the equipment and receiver.
●
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
●
Consult the dealer or an experienced radio/TV technician for help. This equipment should be installed
and operated with a minimum distance of 20 cm between the radiator and your body.
FCC Conditions
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
●
This device may not cause harmful interference.
●
This device must accept any interference received, including interference that may cause undesired
operation
EU Conformity Statement
This product and, if applicable, the supplied accessories too are marked with “CE” and comply
therefore with the applicable harmonized European standards listed under the EMC Directive
2014/30/EU, the RoHS Directive 2011/65/EU and the RE Directive 2014/53/EU.
2012/19/EU (WEEE Directive): Products marked with this symbol cannot be disposed of as unsorted
municipal waste in the European Union. For proper recycling, return this product to your local
supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection
points. For more information, see: www.recyclethis.info.
2006/66/EC (Battery Directive): This product contains a battery that cannot be disposed of as
unsorted municipal waste in the European Union. See the product documentation for specific
battery information. The battery is marked with this symbol, which may include lettering to indicate
cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to your supplier or
to a designated collection point. For more information, see: www.recyclethis.info.
QSG EKI-K41B44W Kit 110520NA 3
Industry Canada ICES-003 Compliance
Warnings
Cautions
serious injury or death.
potential injury or material damage.
This device meets the CAN ICES-3 (B)/NMB-3(B) standards requirements.
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the
following two conditions:
●
This device may not cause interference, and
●
This device must accept any interference, including interference that may cause undesired operation
of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radioexempts de
licence. L'exploitation est autorisée aux deux conditions suivantes :
●
l'appareil ne doit pas produire de brouillage, et
●
l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d'en compromettre le fonctionnement.
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and
maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio
interference to other users, the antenna type and its gain should be so chosen that the equivalent
isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.
Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peutfonctionner avec
une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie Canada.
Dans le but de réduire les risques de brouillage radioélectrique à l'intention des autres utilisateurs, il faut
choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne
dépasse pas l'intensité nécessaire à l'établissement d'une communication satisfaisante.
This equipment should be installed and operated with a minimum distance 20 cm between the radiator
and your body.
Cet équipement doit être installé et utilisé à une distance minimale de 20 cm entre le radiateur et votre
corps.
Safety Instruction
These instructions are intended to ensure that user can use the product correctly to avoid danger or
property loss.
The precaution measure is divided into “Warnings” and “Cautions”
Warnings: Serious injury or death may occur if any of the warnings are neglected.
Cautions: Injury or equipment damage may occur if any of the cautions are neglected.
Follow these safeguards to prevent
Warnings
QSG EKI-K41B44W Kit 110520NA 4
Follow these precautions to prevent
For Network Camera:
●
Proper configuration of all passwords and other security settings is the responsibility of the installer
and/or end-user.
●
In the use of the product, you must be in strict compliance with the electrical safety regulations of the
nation and region. Please refer to technical specifications for detailed information.
●
The power source should meet limited power source or PS2 requirements according to IEC 60950-1 or
IEC 62368-1 standard.
●
Do not connect several devices to one power adapter as adapter overload may cause overheating or a
fire hazard.
●
Please make sure that the plug is firmly connected to the power socket. When the product is mounted
on wall or ceiling, the device shall be firmly fixed.
●
If smoke, odor, or noise rise from the device, turn off the power at once, unplug the power cable, and
then contact the service center.
For NVR Device:
●
Proper configuration of all passwords and other security settings is the responsibility of the installer
and/or end-user.
●
In the use of the product, you must be in strict compliance with the electrical safety regulations of the
nation and region. Please refer to technical specifications for detailed information.
●
The power source should meet limited power source or PS2 requirements according to IEC 60950-1 or
IEC 62368-1 standard.
●
Do not connect several devices to one power adapter as adapter overload may cause overheating or a
fire hazard.
●
Please make sure that the plug is firmly connected to the power socket.
●
If smoke, odor, or noise rise from the device, turn off the power at once, unplug the power cable, and
then contact the service center.
●
If the PoE ports of device do not comply with Limited Power Source, the additional equipment
connected to PoE ports shall have fire enclosure.
●
The USB interface of the /P devices can be connected with the mouse and USB flash disk storage
device only.
QSG EKI-K41B44W Kit 110520NA 5
Cautions
For Network Camera:
●
CAUTION: Hot parts! Burned fingers when handling the parts.
Wait one-half hour after switching off before handling parts. This sticker is to indicate that the marked
item can be hot and should not be touched without taking care. For device with this sticker, this
device is intended for installation in a restricted access location, access can only be gained by
service persons or by users who have been instructed about the reasons for the restrictions applied to
the location and about any precautions that shall be taken.
●
Make sure the power supply voltage is correct before using the camera.
●
Do not drop the camera or subject it to physical shock.
●
Do not touch sensor modules with fingers. If cleaning is necessary, use clean cloth with a bit of
ethanol and wipe it gently. If the camera will not be used for an extended period, please replace the
lens cap to protect the sensor from dirt.
●
Do not aim the camera at the sun or extra bright places. Blooming or smearing may occur otherwise
(which is not a malfunction), and affect the endurance of sensor at the same time.
●
The sensor may be burned out by a laser beam, so when any laser equipment is in using, make sure
that the surface of sensor will not be exposed to the laser beam.
●
The operating temperature shall be -30°C to +60°C (-22° to +140° F). Do not place the camera in
extremely hot, cold, dusty or damp locations, and do not expose it to high electromagnetic radiation.
●
To avoid heat accumulation, good ventilation is required for operating environment.
●
Keep the camera away from liquid while in use.
●
While in delivery, the camera shall be packed in its original packing, or packing of the same texture.
●
Regular part replacement: a few parts (e.g. electrolytic capacitor) of the equipment shall be replaced
regularly according to their average enduring time. The average time varies because of differences
between operating environment and using history, so regular checking is recommended for all the
users. Please contact with your dealer for more details.
●
This equipment is not suitable for use in locations where children are likely to be present.
●
CAUTION: Risk of explosion if the battery is replaced by an incorrect type. Dispose of used batteries
according to the instructions
ATTENTION: IL Y A RISQUE D'EXPLOSION SI LA BATTERIE EST REMPLACÉE PAR UNE BATTERIE DE TYPE INCORRECT.
METTRE AU REBUT LES BATTERIES USAGÉES CONFORMÉMENT AUX INSTRUCTIONS
●
Improper replacement of the battery with an incorrect type may defeat a safeguard (for example, in the
case of some lithium battery types).
QSG EKI-K41B44W Kit 110520NA 6
●
Standard
Power Supply Models
Manufacturer
MSA-C2000IC12.0-
24P-DE
MOSO POWER SUPPLY TECHNOLOGY CO.,LTD
ADS-26FSG-12
12024EPG
SHENZHEN HONOR ELECTRONIC CO.,LTD
MSA-C2000IC12.0-
24P-GB
MOSO POWER SUPPLY TECHNOLOGY CO.,LTD
ADS-26FSG-12
12024EPB
SHENZHEN HONOR ELECTRONIC CO.,LTD
U.S.
101700626 Adapter MSA-C2000IC12.0-24P-US
US-PLUG, AC100-240V, 12V 2A, 24W, Φ2.1x5.5x10
Do not dispose of the battery into fire or a hot oven, or mechanically crush or cut the battery, which
may result in an explosion.
●
Do not leave the battery in an extremely high temperature surrounding environment, which may result
in an explosion or the leakage of flammable liquid or gas.
●
Do not subject the battery to extremely low air pressure, which may result in an explosion or the
leakage of flammable liquid or gas.
●
If the product does not work properly, please contact your dealer or the nearest service center. Never
attempt to disassemble the camera yourself. (We shall not assume any responsibility for problems
caused by unauthorized repair or maintenance.)
For NVR Device:
Before connecting and operating your device, please be advised of the following tips:
●
Ensure unit is installed in a well-ventilated, dust-free environment.
●
Unit is designed for indoor use only.
●
Keep all liquids away from the device.
●
Ensure environmental conditions meet factory specifications.
●
Ensure unit is properly secured to a rack or shelf. Major shocks or jolts to the unit as a result of
dropping it may cause damage to the sensitive electronics within the unit.
●
Use the device in conjunction with a UPS if possible.
●
Power down the unit before connecting and disconnecting accessories and peripherals.
●
A factory recommended HDD should be used for this device.
●
Improper use or replacement of the battery may result in hazard of explosion. Replace with the same or
equivalent type only. Dispose of used batteries according to the instructions provided by the battery
manufacturer.
L’utilisation ou le remplacement inadéquats de la pile peuvent entraîner un risque d’explosion.
Remplacez-la par le même type ou l’équivalent du même type seulement. Jetez les piles usagées
conformément aux directives fournies par le fabricant de la pile.
NVR Power Supply Instructions
Use only power supplies listed in the user instructions.
European
British
QSG EKI-K41B44W Kit 110520NA 7
Loading...