HIKVISION DS-KD8002-VM, DS-KD8102-V, DS-KD6002-VM User Manual

UD.6L0206D1098A01

Video Intercom

Door Station (D Series)

User Manual

Video Intercom Door Station·User Manual

i

User Manual

© 2016 Hangzhou Hikvision Digital Technology Co., Ltd.

This user manual is intended for users of the models below:

Series

Model

Door Station (D Series)

DS-KD8102-V

DS-KD8002-VM

DS-KD6002-VM

It includes instructions on how to use the Product. The software embodied in the
Product is governed by the user license agreement covering that Product.

About this Manual

This Manual is subject to domestic and international copyright protection. Hangzhou

Hikvision Digital Technology Co., Ltd. (“Hikvision”) reserves all rights to this manual. This

manual cannot be reproduced, changed, translated, or distributed, partially or wholly,
by any means, without the prior written permission of Hikvision.

Trademarks

and other Hikvision marks are the property of Hikvision and are
registered trademarks or the subject of applications for the same by Hikvision and/or its
affiliates. Other trademarks mentioned in this manual are the properties of their
respective owners. No right of license is given to use such trademarks without express
permission.

Disclaimer

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, HIKVISION MAKES NO WARRANTIES,
EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, REGARDING THIS MANUAL.
HIKVISION DOES NOT WARRANT, GUARANTEE, OR MAKE ANY REPRESENTATIONS REGARDING THE
USE OF THE MANUAL, OR THE CORRECTNESS, ACCURACY, OR RELIABILITY OF INFORMATION
CONTAINED HEREIN. YOUR USE OF THIS MANUAL AND ANY RELIANCE ON THIS MANUAL SHALL BE
WHOLLY AT YOUR OWN RISK AND RESPONSIBILITY.

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT WILL HIKVISION, ITS
DIRECTORS, OFFICERS, EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY SPECIAL,
CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES
FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, SECURITY BREACHES, OR LOSS OF DATA
OR DOCUMENTATION, IN CONNECTION WITH THE USE OF OR RELIANCE ON THIS MANUAL, EVEN IF
HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

Video Intercom Door Station·User Manual

ii

SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY OR CERTAIN
DAMAGES, SO SOME OR ALL OF THE ABOVE EXCLUSIONS OR LIMITATIONS MAY NOT APPLY TO YOU.

Support

Should you have any questions, please do not hesitate to contact your local dealer.

0103001060116

Video Intercom Door Station·User Manual

iii

Regulatory Information

FCC Information

Please take attention that changes or modification not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.

FCC compliance: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one
or more of the following measures:

—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.

This equipment should be installed and operated with a minimum distance 20cm
between the radiator and your body.

FCC Conditions

This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference that may
cause undesired operation.

EU Conformity Statement

This product and - if applicable - the supplied accessories too are
marked with "CE" and comply therefore with the applicable
harmonized European standards listed under the R&TTE Directive
1999/5/EC, the EMC Directive 2004/108/EC, the RoHS Directive
2011/65/EU.

2012/19/EU (WEEE directive): Products marked with this symbol
cannot be disposed of as unsorted municipal waste in the European
Union. For proper recycling, return this product to your local supplier
upon the purchase of equivalent new equipment, or dispose of it at
designated collection points. For more information see:

www.recyclethis.info

Video Intercom Door Station·User Manual

iv

2006/66/EC (battery directive): This product contains a battery that
cannot be disposed of as unsorted municipal waste in the European
Union. See the product documentation for specific battery information.
The battery is marked with this symbol, which may include lettering to
indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling,
return the battery to your supplier or to a designated collection point.
For more information see: www.recyclethis.info

Industry Canada ICES-003 Compliance

This device meets the CAN ICES-3 (B)/NMB-3(B) standards requirements.

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is
subject to the following two conditions:

(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause

undesired operation of the device.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils
radioexempts de licence. L'exploitation est autorisée aux deux conditions suivantes :

(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si

le brouillage est susceptible d'en compromettre le fonctionnement.

Under Industry Canada regulations, this radio transmitter may only operate using an
antenna of a type and maximum (or lesser) gain approved for the transmitter by
Industry Canada. To reduce potential radio interference to other users, the antenna type
and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.)
is not more than that necessary for successful communication.

Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut
fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé
pour l'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage
radioélectrique à l'intention des autres utilisateurs, il faut choisir le type d'antenne et
son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse
pas l'intensité nécessaire à l'établissement d'une communication satisfaisante.

Video Intercom Door Station·User Manual

v

Safety Instruction

These instructions are intended to ensure that user can use the product correctly to
avoid danger or property loss.

The precaution measure is divided into Warnings and Cautions:

Warnings: Neglecting any of the warnings may cause serious injury or death.
Cautions: Neglecting any of the cautions may cause injury or equipment damage.

Warnings

All the electronic operation should be strictly compliance with the electrical safety
regulations, fire prevention regulations and other related regulations in your local
region.

Please use the power adapter, which is provided by normal company. The power
consumption cannot be less than the required value.

Do not connect several devices to one power adapter as adapter overload may cause
over-heat or fire hazard.

Please make sure that the power has been disconnected before you wire, install or
dismantle the device.

When the product is installed on wall or ceiling, the device shall be firmly fixed.
If smoke, odors or noise rise from the device, turn off the power at once and unplug the

power cable, and then please contact the service center.
If the product does not work properly, please contact your dealer or the nearest service

center. Never attempt to disassemble the device yourself. (We shall not assume any
responsibility for problems caused by unauthorized repair or maintenance.)

Cautions

Do not drop the device or subject it to physical shock, and do not expose it to high
electromagnetism radiation. Avoid the equipment installation on vibrations surface or
places subject to shock (ignorance can cause equipment damage).

Do not place the device in extremely hot (refer to the specification of the device for the
detailed operating temperature), cold, dusty or damp locations, and do not expose it to
high electromagnetic radiation.

The device cover for indoor use shall be kept from rain and moisture.

Warnings Follow
these safeguards to
prevent serious
injury or death.

Cautions Follow these
precautions to prevent
potential injury or
material damage.

Video Intercom Door Station·User Manual

vi

Exposing the equipment to direct sun light, low ventilation or heat source such as heater
or radiator is forbidden (ignorance can cause fire danger).

Do not aim the device at the sun or extra bright places. A blooming or smear may occur
otherwise (which is not a malfunction however), and affecting the endurance of sensor
at the same time.

Please use the provided glove when open up the device cover, avoid direct contact with
the device cover, because the acidic sweat of the fingers may erode the surface coating
of the device cover.

Please use a soft and dry cloth when clean inside and outside surfaces of the device
cover, do not use alkaline detergents.

Please keep all wrappers after unpack them for future use. In case of any failure
occurred, you need to return the device to the factory with the original wrapper.
Transportation without the original wrapper may result in damage on the device and
lead to additional costs.

Improper use or replacement of the battery may result in hazard of explosion. Replace
with the same or equivalent type only. Dispose of used batteries according to the
instructions provided by the battery manufacturer.

Video Intercom Door Station·User Manual

vii

Table of Contents

1 Overview ...................................................................................................... 1

1.1 Introduction ............................................................................................................. 1

1.2 Main Features .......................................................................................................... 1

2 Appearance .................................................................................................. 2

2.1 Front Panel and Keys (DS-KD8102-V) ....................................................................... 2

2.2 Front Panel and Keys (DS-KD8002-VM) ................................................................... 4

2.3 Front Panel and Keys (DS-KD6002-VM) ................................................................... 6

3 Typical Application ....................................................................................... 8

4 Terminals and Interfaces .............................................................................. 9

4.1 Terminals and Interfaces of DS-KD8102-V/ DS-KD8002-VM .................................... 9

4.2 Terminals and Interfaces of DS-KD6002-VM .......................................................... 11

5 Installation and Wiring ............................................................................... 13

5.1 Installation of DS-KD8102-V .................................................................................. 13

5.1.1 Gang Box for DS-KD8102-V ............................................................................. 13

5.1.2 Wall Mounting with Gang Box of DS-KD8102-V .............................................. 14

5.2 Installation of DS-KD8002-VM ............................................................................... 15

5.2.1 Gang Box for DS-KD8002-VM .......................................................................... 15

5.2.2 Wall Mounting with Gang Box of DS-KD8002-VM ........................................... 16

5.3 Installation of DS-KD6002-VM ............................................................................... 18

5.3.1 Gang Box for DS-KD6002-VM .......................................................................... 18

5.3.2 Wall Mounting with Gang Box of DS-KD6002-VM ........................................... 19

5.4 Wiring Description ................................................................................................. 20

5.4.1 Door Lock Wiring ............................................................................................. 20

5.4.2 Door Magnetic Wiring ..................................................................................... 21

5.4.3 Exit Button Wiring ........................................................................................... 23

5.4.4 External Card Reader Wiring ........................................................................... 24

5.4.5 Alarm Device Input Wiring .............................................................................. 25

5.4.6 Alarm Device Output Wiring ........................................................................... 26

6 Before You Start ......................................................................................... 27

7 Video Intercom Device Set-up Tool ............................................................. 28

7.1 Setting a Community Structure ............................................................................. 28

7.1.1 Setting Project ................................................................................................. 28

7.1.2 Setting Community ......................................................................................... 29

7.1.3 Setting Building ............................................................................................... 30

7.1.4 Setting Floor .................................................................................................... 30

7.1.5 Setting Room ................................................................................................... 31

7.2 Activating and Setting Main Door Station .............................................................. 32

7.3 Activating and Setting Sub Door Station ................................................................ 33

Video Intercom Door Station·User Manual

viii

8 Batch Configuration Software..................................................................... 36

8.1 Activating Device Remotely ................................................................................... 36

8.2 Editing Network Parameters .................................................................................. 37

8.3 Adding Device ........................................................................................................ 38

8.3.1 Adding Online Devices .................................................................................... 38

8.3.2 Adding by IP Address, IP Segment or Port No. ................................................ 39

8.4 Remote Configuration ........................................................................................... 41

8.4.1 System ............................................................................................................. 41

8.4.2 Video Intercom ................................................................................................ 48

8.4.3 Network .......................................................................................................... 52

8.4.4 Video Display ................................................................................................... 54

9 Setting the Door Station via iVMS-4200 ..................................................... 55

9.1 System Configuration ............................................................................................. 55

9.2 Device Management .............................................................................................. 55

9.3 Live View of Device ................................................................................................ 55

9.4 Picture Storage on Storage Server ......................................................................... 57

9.4.1 Adding Storage Server ..................................................................................... 57

9.4.2 Formatting the HDDs ....................................................................................... 58

9.4.3 Configuring Storage Server Picture Storage .................................................... 58

9.5 Group Management .............................................................................................. 59

9.5.1 Adding Group .................................................................................................. 60

9.5.2 Assigning Devices to Group ............................................................................. 61

9.5.3 Modifying Device Information ........................................................................ 62

9.5.4 Deleting Device ............................................................................................... 62

9.6 Card Management ................................................................................................. 63

9.6.1 Unauthorized Card Management .................................................................... 63

9.6.2 Normal Card Management .............................................................................. 70

9.7 Notice Management .............................................................................................. 71

9.7.1 Querying Unlocking Log .................................................................................. 71

9.8 Device Arming Control ........................................................................................... 71

10 Local Operation ........................................................................................ 73

10.1 Activating the Device ........................................................................................... 73

10.2 Status ................................................................................................................... 73

10.3 Unlocking Door .................................................................................................... 74

10.3.1 Unlocking Door by Password ......................................................................... 74

10.3.2 Unlocking Door by Swiping Card ................................................................... 75

10.4 Starting Video Call ............................................................................................... 75

10.4.1 Video Call via Main/Sub Door Station ........................................................... 75

10.4.2 Video Call via Outer Door Station.................................................................. 75

10.5 Setting Parameters .............................................................................................. 76

10.5.1 Network Configuration .................................................................................. 77

10.5.2 Local Settings ................................................................................................ 78

10.5.3 Issuing Card ................................................................................................... 79

10.5.4 Changing Password ....................................................................................... 80

Video Intercom Door Station·User Manual

ix

10.5.5 Volume Settings ............................................................................................ 81

10.5.6 About ............................................................................................................ 82

Appendix ...................................................................................................... 83

Installation Notice ....................................................................................................... 83

Wiring Cables ............................................................................................................... 83

Specification ................................................................................................................ 83

Specification of DS-KD8102-V .................................................................................. 83

Specification of DS-KD8002-VM ............................................................................... 85

Specification of DS-KD6002-VM ............................................................................... 87

Video Intercom Door Station·User Manual

1

1 Overview

1.1 Introduction

The video intercom system can realize functions such as video intercom,
resident-to-resident video call, live view of HD video, access control, one-card system,
elevator linkage, 8-ch zone alarm, notice information and visitor messages to provide a
complete smart community video intercom solution.

The video intercom door station is mainly applied to situations such as community, villa,
and official buildings.

1.2 Main Features

 Video intercom function
 HD video surveillance (Max. resolution 1280×720@30fps, WDR, 120° wide angle)
 Self-adaptive light supplement
 Access control function
 Activating card via local station function (This function will be invalid if the card has

been activated via iVMS-4200)

 Auto-uploading captured pictures to FTP or iVMS-4200 Client while unlocking the

door

 Elevator linkage
 Door magnetic alarm and tamper-proof alarm function
 Noise suppression and echo cancellation
 IR detection (only supported by DS-KD8102-V model)
 Remote upgrade, batch setting, upgrade via USB flash disk functions

Video Intercom Door Station·User Manual

2

2 Appearance

2.1 Front Panel and Keys (DS-KD8102-V)

Figure 2-1 Front Panel Keys

Figure 2-2 Side View

Video Intercom Door Station·User Manual

3

Table 2-1 Descriptions of Front Panel Keys

No.

Description

1

Low Illumination Supplement Light

2

Built-in Camera

3

LCD Display Screen

4

Numeric Keypad

5

Calling Button

6

Calling Center Key

7

Microphone

8

Card Induction Area

9

IR Emission

10

IR Receiver

11

Loudspeaker

12

Tamper Button

Video Intercom Door Station·User Manual

4

2.2 Front Panel and Keys (DS-KD8002-VM)

Figure 2-3 Front Panel Keys

10

Figure 2-4 Side View

Video Intercom Door Station·User Manual

5

Table 2-2 Descriptions of Front Panel Keys

No.

Description

1

Low Illumination Supplement Light

2

Built-in Camera

3

LCD Display Screen

4

Card Induction Area

5

Loudspeaker

6

Numeric Keypad

7

Calling Button

8

Microphone

9

Calling Center Key

10

Tamper Button

The appearance of the devices is only for reference, and the actual appearance of it
depends on the actual object.

Video Intercom Door Station·User Manual

6

2.3 Front Panel and Keys (DS-KD6002-VM)

Figure 2-5 Front Panel Keys and Rear Panel Keys

Table 2-3 Descriptions Keys

No.

Description

1

Low Illumination Supplement Light

2

Built-in Camera

3

Loudspeaker

4

LCD Display Screen

5

Card Induction Area

6

Numeric Keypad

Video Intercom Door Station·User Manual

7

No.

Description

7

Calling Button

8

Calling Center Key

9

Microphone

10

Tamper Button

The appearance of the devices is only for reference, and the actual appearance of it
depends on the actual object.

Video Intercom Door Station·User Manual

8

3 Typical Application

Please refer to the following figure for typical application of door station.

Switch

Client Software

Center Master Station

(Master Station)

Network Cable

Optical Fiber

Resident 2

Resident 1

Door Station

Resident 2

Resident 1

Resident 2

Resident 1

Building

IPC

Video/Audio

Distributor

Master Station
in Guard's Room

Outer Door Station

Estate LAN

Switch

Indoor

Extension 1

Indoor

Extension 2

Resident 2

Resident 1

Video/Audio

Distributor

One Resident

Figure 3-1 Typical Application of Door Station

Video Intercom Door Station·User Manual

9

4 Terminals and Interfaces

4.1 Terminals and Interfaces of DS-KD8102-V/

DS-KD8002-VM

Figure 4-1 Terminals and Interfaces

Table 4-1 Descriptions of Terminals and Interfaces

Name

No.

Interface

Description

USB 1 USB

USB Interface

LAN

2

LAN1

Network Interface

3

LAN2

Reserved

Power

Supply

4

DC 12V

DC 12V Power Supply Input

READER

A1

12V

Card Reader Power Supply Output

A2

GND

Grounding

A3

W1

Data Input Interface Wiegand Card Reader:

Data1

A4

W0

Data Input Interface Wiegand Card Reader:

Data0

A5

BZ

Card Reader Buzzer Output

Video Intercom Door Station·User Manual

10

Name

No.

Interface

Description

A6

ERR

Card Reader Indicator Output (Invalid Card

Output)

A7

OK

Card Reader Indicator Output (Valid Card

Output)

A8

TAMP

Tamper-proof Input of Wiegand Card Reader

ALARM

OUT

B1

AO2-

Alarm Relay Output 2

B2

AO2+

B3

AO1-

Alarm Relay Output 1

B4

AO1+

ALARM IN

B5

AI4

Alarm Input 4

B6

AI3

Alarm Input 3

B7

AI2

Alarm Input 2

B8

AI1

Alarm Input 1

DOOR

C1

12V

Door Lock Power Supply Output

C2

GND

Grounding

C3

NC2

Door Lock Relay Output/Connect Electric Bolt

or Magnetic Lock

C4

COM2

Grounding Signal

C5

NO2

Door Lock Relay Output/Connect Electric Strike

C6

NC1

Door Lock Relay Output/Connect Electric Bolt

or Magnetic Lock

C7

COM1

Grounding Signal

C8

NO1

Door Lock Relay Output/Connect Electric Strike

RS485

D1

GND

Reserved

D2

485-

D3

485+

SENSOR

D4

GND

Grounding Signal

D5

S4

Door Magnetic Detection Input 4/Exit Button

D6

S3

Door Magnetic Detection Input 3/Exit Button

D7

S2

Door Magnetic Detection Input 2/Exit Button

D8

S1

Door Magnetic Detection Input 1/Exit Button

Video Intercom Door Station·User Manual

11

4.2 Terminals and Interfaces of DS-KD6002-VM

Figure 4-2 Terminals and Interfaces of DS-KD6002-VM

Table 4-2 Descriptions of Terminals and Interfaces

Name

No.

Interface

Description

USB 1 USB

USB Interface

LAN

2

LAN1

Network Interface

3

LAN2

Reserved

Power

Supply

4

DC 12V

DC 12V Power Supply Input

READER

A1

12V

Card Reader Power Supply Output

A2

GND

Grounding

A3

W1

Data Input Interface Wiegand Card Reader:

Data1

A4

W0

Data Input Interface Wiegand Card Reader:

Data0

A5

BZ

Card Reader Buzzer Output

A6

ERR

Card Reader Indicator Output (Invalid Card

Output)

A7

OK

Card Reader Indicator Output (Valid Card

Output)

A8

TAMP

Tamper-proof Input of Wiegand Card Reader

Video Intercom Door Station·User Manual

12

Name

No.

Interface

Description

ALARM

OUT

B1

AO2-

Alarm Relay Output 2

B2

AO2+

B3

AO1-

Alarm Relay Output 1

B4

AO1+

DEBUG

B5

GND

Grounding

B6

RX

Serial Port Debugging/Receive data

B7

TX

Serial Port Debugging/Send data

B8

3.3V

Serial Port Debugging/Power Supply

DOOR

C1

12V

Door Lock Power Supply Output

C2

GND

Grounding

C3

NC2

Door Lock Relay Output/Connect Electric Bolt

or Magnetic Lock

C4

COM2

Grounding Signal

C5

NO2

Door Lock Relay Output/Connect Electric Strike

C6

NC1

Door Lock Relay Output/ Connect Electric Bolt

or Magnetic Lock

C7

COM1

Grounding Signal

C8

NO1

Door Lock Relay Output/Connect Electric Strike

RS485

D1

GND

Reserved

D2

485-

D3

485+

ALARM IN

D4

GND

Grounding Signal

D5

AI4

Alarm Input 4

D6

AI3

Alarm Input 3

D7

AI2

Alarm Input 2

D8

AI1

Alarm Input 1

Video Intercom Door Station·User Manual

13

5 Installation and Wiring

5.1 Installation of DS-KD8102-V

To install the door station onto the wall, you are required to use a matched gang box.

5.1.1 Gang Box for DS-KD8102-V

Refer to the following figures for the dimensions of gang box for DS-KD8102-V door
station.

123

47.5

404

Figure 5-1 Front and Side View

123

Figure 5-2 Overhead (Plan) View

 The dimension of gang box for model DS-KD8102-V door station is: 404 (length)×123

(width)×47.5 (depth) mm.

 The dimensions above are for reference only. The actual size can be slightly different

from the theoretical dimension.

Video Intercom Door Station·User Manual

14

5.1.2 Wall Mounting with Gang Box of DS-KD8102-V

Steps:

1. Take the gang box and screws from the packing box.

2. Chisel a hole in the wall for inserting the gang box. The size of the hole should be

larger than that of the gang box. The suggested size of hole is 404.5 (length) × 123.5
(width) ×48 (depth) mm.

3. Insert the gang box into the hole and fix it with 4 PA4 screws, as shown in the figure

below.

Figure 5-3 Insert the Gang Box into the Wall

4. Make sure the edges of the gang box align to the wall.

5. Route the cables of the door station through the cable hole.

6. Put the door station into the gang box and hook the lock catches on the rear panel

onto the hook A and B of the gang box, as shown in the figure below.

Figure 5-4 Install the Door Station

Video Intercom Door Station·User Manual

15

7. Pull the door station downward and then push it towards the inside to make sure it

fits the hole.

8. Tighten the screws of the door station with the Allen wrench in the package, as

shown in the figure below.

Figure 5-5 Tighten the Screws of Device

5.2 Installation of DS-KD8002-VM

To install the door station onto the wall, you are required to utilize a matched gang box.

5.2.1 Gang Box for DS-KD8002-VM

Please refer to the following figures for the dimensions of gang box for DS-KD8002-VM
door station.

407.5

135

Figure 5-6 Front View

Video Intercom Door Station·User Manual

16

9

9

7.6

Figure 5-7 Overhead (Plan) View

 The dimension of gang box for model DS-KD8002-VM door station is: 407.5 mm × 135

mm × 55 mm.

 The dimensions above are for reference only. The actual size can be slightly larger

than the theoretical dimension.

5.2.2 Wall Mounting with Gang Box of DS-KD8002-VM

1. Take the gang box and screws from the packing box.

2. Chisel a hole in the wall for inserting the gang box. The size of the hole should be

larger than that of the gang box. The suggested size of hole is 136 (length) × 408.5
(width) × 55.5 (depth) mm.

135.5

384

408

8.75 118 8.75

55

Figure 5-8 Dimensions of the Hole

Video Intercom Door Station·User Manual

17

3. Insert the gang box into the hole and fix it with 4 PA4 screws, as shown in the figure

below.

Figure 5-9 Insert the Gang Box into the Wall

4. Make sure the edges of the gang box align to the wall and the hook A and hook B of

the gang box hook onto the wall.

5. Route the cables of the door station through the cable hole.

6. Insert the door station into the gang box and then move the door station downward

to hook the lock catches on the rear panel onto the hook C of the gang box.

7. Fix the door station with 2 PM3 screws, as shown in the figure below.

Figure 5-10 Install the Door Station

8. After fixing the door station onto the gang box, secure it by inserting the plate and

insert 2 POM2 screws, as shown in the figure below.

Video Intercom Door Station·User Manual

18

Figure 5-11 Secure the Door Station

5.3 Installation of DS-KD6002-VM

To install the door station onto the wall, you are required to use a matched gang box.

5.3.1 Gang Box for DS-KD6002-VM

Refer to the following figures for the dimensions of gang box for DS-KD6002-VM door
station.

Figure 5-12 Front and Side View

Video Intercom Door Station·User Manual

19

 The dimension of gang box for model DS-KD6002-VM door station is: 343 (length)×

113(width)×55depth) mm.

 The dimensions above are for reference only. The actual size can be slightly different

from the theoretical dimension.

5.3.2 Wall Mounting with Gang Box of DS-KD6002-VM

Steps:

1. Take the gang box and screws from the packing box.

2. Chisel a hole in the wall for inserting the gang box. The size of the hole should be

larger than that of the gang box. The suggested size of hole is 343.5 (length) × 113.5
(width) × 55.5 (depth) mm.

3. Insert the gang box into the hole and fix it with 4 PA4 screws, as shown in the figure

below.

Screw

Screw

Figure 5-13 Insert the Gang Box into the Wall

4. Make sure the edges of the gang box align to the wall.

5. Route the cables of the door station through the cable hole.

6. Put the door station into the gang box.

Video Intercom Door Station·User Manual

20

Figure 5-14 Install the Door Station

7. Fix the door station to the gang box with 4 crews.

Figure 5-15 Tighten the Screws of Device

5.4 Wiring Description

5.4.1 Door Lock Wiring