
DS-2TD2137-4/V1
Thermal Network Bullet Camera
Hikvision DS-2TD2137-4/V1 Thermal Network Bullet Camera equipped with built-in GPU which support intelligent
behavior analysis algorithm, can realize high precision VCA detection and real-time alarm. It is applied to perimeter
defense and fire-prevention purposes in critical infrastructures such as: airport, railway, prison, power station, 4S
stores, and so on. The pre-alarm system helps you discover unexpected events immediately and protects you from
property loss.
Smart Function (Thermal Imaging)
● Leading image processing technology: Adaptive AGC, DDE, 3D DNR, NETD less than 35mk (@25°C,F#=1.0)
● Powerful behavior analysis function, based on deep learning algorithm: Line crossing, Intrusion, Region Entrance &
Exit
● Reliable temperature exception alarm function
● Advanced fire detection algorithm
Thermal Imaging Module Function
● 384 × 288 resolution sensor, high sensitivity sensor, support contrast adjustment
● Shutter adjustment in various modes
● 3D DNR, 15 palettes of color adjustable, image detail enhancement

Vanadium Oxide Uncooled Focal Plane Arrays
less than 35mk (@25°C,F#=1.0)
VCA (Video Content Analysis)
4 VCA rule types (Line Crossing, Intrusion, Region Entrance, and Region Exiting),
up to 8 VCA rules.
3 temperature measurement rule types, 21 rules (10 points, 10 regions, and 1
line).
-20 °C to 150 °C (-4 °F to 302 °F)
Dynamic fire point detection, up to 10 fire points detectable.
H.265/H.264/MJPEG, H.265+/H.264+ encoding with Baseline/Main/High Profile
G .711u/G.711a/G.722.1/MP2L2/G.726/PCM
IPv4/IPv6, HTTP, HTTPS, 802.1x, Qos, FTP, SMTP, UPnP, SNMP, DNS, DDNS,NTP,
RTSP, RTCP, RTP, TCP, UDP, IGMP, ICMP, DHCP, PPPoE
ONVIF (PROFILE S, PROFILE G)
Up to 32 users, 3 levels: Administrator, Operator, User
User authentication (ID and PW), MAC address binding, HTTPS encryption, IEEE
802.1x access control, IP address filtering
2-ch relay outputs, alarm response actions configurable
Preset/Patrol Scan/Pattern Scan/SD Card Record/Relay Output/Smart
capture/FTP upload/Email linkage
1 3.5mm Mic in/Line in interface. Line input: 2-2.4V[p-p], output
impedance:1KΩ±10%

Linear Level; Impedance: 600Ω
1 RJ45 10M/100M Self-adaptive Ethernet interface
Built-in Micro SD card slot, support Micro SD/SDHC/SDXC card (up to 128G),
support manual/alarm recording
1.0V [p-p]/75Ω, PAL/NTSC/BNC
Open-ended API, support ISAPI, HIKVISION SDK and third-party management
platform
IE9+, chrome31-chrome44, Firefox 30-Firefox51, Safari 5.02+(mac)
24 VAC± 25%, 12 VDC± 20%, two-core terminal block
PoE (802.3at, class 4)
24 VAC± 25%: 0.84 A, 12 VDC ± 20%: 1.7 A, max. 8W (20W with De-icing Heater
On), PoE (802.3at, class 4): 42.5 V to 57 V, 0.4 A to 0.5 A
Working
Temperature/Humidity
-40 °C to 65 °C (-40 °F to 149 °F), 90% or less
IP66 Standard
TVS 6000V Lightning protection, surge protection, voltage transient protection
352.4mm × 113.5mm × 113mm (13.9" × 4.45" × 4.45")

Detection Range Table
* The table is only for reference, the performance may vary from camera to camera.
Smart functions Range
Different targets trigger the VCA events within different range limits.
VCA Range
(Vehicles:
1.4×4.0m)
VCA Range
(Humans:
1.8×0.5m)
Temperature
Measurement
(Object:2×2 m)
Temperature
measurement
(Object:1×1 m)
Fire Detection
(Object:2×2 m)
Fire Detection
(Object:1×1 m)
Wide Range Coverage
There is range limit for detecting, recognizing, and identifying human/vehicle targets.
Detection Range
(Vehicles:
1.4×4.0m)
Detection Range
(Humans:
1.8×0.5m)
Recognition
Range (Vehicles:
1.4×4.0m)
Recognition
Range (Humans:
1.8×0.5m)
Identification
Range (Vehicles:
1.4×4.0m)
Identification
Range (Humans:
1.8×0.5m)
Available Model
DS-2TD2137-4/V1
Dimension