Hikvision DS-2DY9188-AIA, DS-2DY9236X-A Quick Start Guide

Network Positioning System

Quick Start Guide

Network Positioning System·Quick Start Guide

Quick Start Guide

Any and all information, including, among others, wordings, pictures, graphs are the properties of Hangzhou Hikvision Digital Technology Co., Ltd. or its subsidiaries (hereinafter referred to be “Hikvision”). This user manual (hereinafter referred to be “the Manual”) cannot be reproduced, changed, translated, or distributed, partially or wholly, by any means, without the prior written permission of Hikvision. Unless otherwise stipulated, Hikvision does not make any warranties, guarantees or representations, express or implied, regarding to the Manual.

About this Manual

This Manual is applicable to Network Positioning System.

The Manual includes instructions for using and managing the product. Pictures, charts, images and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without notice, due to firmware updates or other reasons. Please find the latest version in the company website (http://overseas.hikvision.com/en/).

Please use this user manual under the guidance of professionals.

Trademarks Acknowledgement

and other Hikvision’s trademarks and logos are the properties of Hikvision in various jurisdictions. Other trademarks and logos mentioned below are the properties of their respective owners.

Legal Disclaimer

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, IS PROVIDED “AS IS”, WITH ALL FAULTS AND ERRORS, AND HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL HIKVISION, ITS DIRECTORS, OFFICERS, EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA OR DOCUMENTATION, IN CONNECTION WITH THE USE OF THIS PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE WHOLLY AT YOUR OWN RISKS. HIKVISION SHALL NOT TAKE ANY RESPONSIBILITES FOR

Network Positioning System·Quick Start Guide

ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.

SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS IN YOUR JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO ENSURE THAT YOUR USE CONFORMS THE APPLICABLE LAW. HIKVISION SHALL NOT BE LIABLE IN THE EVENT THAT THIS PRODUCT IS USED WITH ILLEGITIMATE PURPOSES.

IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER PREVAILS.

0505001080517

Network Positioning System·Quick Start Guide

Regulatory Information

FCC Information

Please take attention that changes or modification not expressly approved by the party

responsible for compliance could void the user’s authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits

for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

FCC Conditions

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference that may cause undesired operation

EU Conformity Statement

This product and - if applicable - the supplied accessories too are marked with "CE" and comply therefore with the applicable harmonized European standards listed under the Low Voltage Directive 2015/35/EU, the EMC

Directive 2014/30/EU, the RoHS Directive 2011/65/EU.

2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points.

For more information see: www.recyclethis.info.

2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union. See the product documentation for specific battery information. The battery is marked with this symbol, which may include lettering to indicate cadmium

(Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to your supplier or to a designated collection point. For more information see:

www.recyclethis.info.

Industry Canada ICES-003 Compliance This device meets the CAN ICES-3 (A)/NMB-3(A) standards requirements.

Network Positioning System·Quick Start Guide

Safety Instruction

These instructions are intended to ensure that user can use the product correctly to avoid danger or property loss.

The precaution measure is divided into Warnings and Cautions:

Warnings: Neglecting any of the warnings may cause serious injury or death. Cautions: Neglecting any of the cautions may cause injury or equipment damage.

Warnings

 Adopt the power adapter which can meet the safety extra low voltage (SELV)

standard. The power consumption cannot be less than the required value.

 Do not connect several devices to one power adapter as an adapter overload may

cause over-heating and can be a fire hazard.

 When the product is installed on a wall or ceiling, the device should be firmly fixed.

 To reduce the risk of fire or electrical shock, do not expose the indoor used product

to rain or moisture.

 This installation should be made by a qualified service person and should conform to

all the local codes.

 Install blackouts equipment into the power supply circuit for convenient supply

interruption.

 If the product does not work properly, contact your dealer or the nearest service

center. Never attempt to disassemble the product yourself. (We shall not assume any responsibility for problems caused by unauthorized repair or maintenance.)

Cautions

 If the network positioning system fails to synchronize local time with that of the

network, you need to set up network positioning system time manually. Visit the network positioning system (via web browser or client software) and enter system settings interface for time settings.

 Make sure the power supply voltage is correct before using the product.  Do not drop the product or subject it to physical shock. Do not install the product on

vibratory surface or places.

 Do not expose it to high electromagnetic radiating environment.  Do not aim the lens at the strong light such as sun or incandescent lamp. The strong

light can cause fatal damage to the product.

Warnings Follow these safeguards to prevent serious injury or death.

Cautions Follow these precautions to prevent potential injury or material damage.

Network Positioning System·Quick Start Guide

 The sensor may be burned out by a laser beam, so when any laser equipment is

being used, make sure that the surface of the sensor not be exposed to the laser beam.

 For working temperature, refer to the specification manual for details.  To avoid heat accumulation, good ventilation is required for a proper operating

environment.

 While shipping, the product should be packed in its original packing.  Use the provided glove when open up the product cover. Do not touch the product

cover with fingers directly, because the acidic sweat of the fingers may erode the surface coating of the product cover.

 Use a soft and dry cloth when clean inside and outside surfaces of the product cover.

Do not use alkaline detergents.

 Improper use or replacement of the battery may result in hazard of explosion. Use

the manufacturer recommended battery type.

Network Positioning System·Quick Start Guide

Table of Contents

1 Overview ...................................................................................................... 7

1.1 Introduction ........................................................................................................ 7

1.1.1 Overview of DY5xxx Series Network Positioning System ............................. 7

1.1.2 Overview of DY7xxx Series Network Positioning System ............................. 8

1.1.3 Overview of DY9xxx Series Network Positioning System ........................... 10

1.2 Cable Descriptions ............................................................................................ 11

1.3 Alarm Input/Output .......................................................................................... 12

2 Installation ................................................................................................. 13

2.1 Installing DY9xxx Network Positioning System ...................................................... 13

2.1.1 Installing DY9xxx Series Laser Network Positioning System (Type III and Type IV)

................................................................................................................................. 13

2.1.2 Installing DY9xxx Series IR Network Positioning System (Type II) .................... 18

2.1.3 Installing DY9xxx Series Network Positioning System (Type I) ......................... 21

2.2 Installing DY7xxx Network Positioning System ...................................................... 21

2.3 Installing DY5xxx Network Positioning System ...................................................... 21

3 Setting the Positioning System over the LAN .............................................. 22

3.1 Wiring .................................................................................................................... 22

3.2 Activating the Positioning System .......................................................................... 22

3.2.1 Activation via Web Browser ............................................................................ 23

3.2.2 Activation via SADP Software .......................................................................... 24

3.3 Modifying the IP Address ....................................................................................... 25

4 Accessing via Web browser ........................................................................ 27

5 Operating via Hik-Connect App .................................................................. 29

5.1 Enable Hik-Connect Service on Positioning System ............................................... 29

5.1.1 Enable Hik-Connect Service via SADP Software .............................................. 29

5.1.2 Enable Hik-Connect Service via Web Browser ................................................. 30

5.2 Hik-Connect Setup ................................................................................................. 30

5.3 Adding Positioning System to Hik-Connect ............................................................ 31

5.4 Initializing the Memory Card ................................................................................. 32

Network Positioning System·Quick Start Guide

1 Overview

1.1 Introduction

The network positioning system has three series:

 DY5xxx Series  DY7xxx Series  DY9xxx Series

1.1.1 Overview of DY5xxx Series Network Positioning System

Shield

(Auxiliary

Light Side)

Shield

(Camera Side)

Wiper

Main Body

Base

306

212

165

Unit: mm

Figure 1-1 Dimensions of DY5xxx Series Network Positioning System (Type I)

167

132

4-Φ9

Unit: mm

Figure 1-2 Bottom View of DY5xxx Series Network Positioning System (Type I)

Network Positioning System·Quick Start Guide

306

212

165

Unit: mm

Shock-absorbing

pad

Shield

(Auxiliary

Light Side)

Main body

Wiper

Shield

(Camera

Side)

Base

Figure 1-3 Dimensions of DY5xxx Series Mobile Network Positioning System (Type II)

Unit: mm

134

4-Φ9

140

175

Figure 1-4 Dimensions of Shock-absorbing Pad for DY5xxx Series Mobile Network

Positioning System (Type II)

1.1.2 Overview of DY7xxx Series Network Positioning System

Unit: mm

396

188

377.5

218

Base

Main Body

Shield

Figure 1-5 Dimensions of DY7xxx Series IR Network Positioning System (Type I)

Network Positioning System·Quick Start Guide

218

377.5

188

396

Shield

Wiper

Main Body

Base

Unit: mm

Figure 1-6 Dimensions of DY7xxx Series IR Network Positioning System (Type I with

Wiper)

Unit: mm

396

188

377.5

218

Shield

Main Body

Base

Figure 1-7 Dimensions of DY7xxx Series Network Positioning System (Type II)

Network Positioning System·Quick Start Guide

1.1.3 Overview of DY9xxx Series Network Positioning System

390

180

491

Unit: mm

Shield

390

180

491

Unit: mm

Wiper

Main Body

Base

Figure 1-8 Dimensions of DY9xxx Series Network Positioning System (Type I)

Unit: mm

460

180

491

Wiper

Shield

Main Body

Base

IR Module

Figure 1-9 Dimensions of DY9xxx Series IR Network Positioning System (Type II)

251

Unit: mm

360

508

180

Housing

Wiper

Main Body

Base

Figure 1-10 Dimensions of DY9xxx Series Laser Network Positioning System (Type III)

+ 23 hidden pages