DS-1530HMI Mobile Alarm Terminal
User Manual (V1.0)
UD.6L0202D2104A01
DS-1530HMI Mobile Alarm Terminal
1
TABLE OF CONTENTS
Chapter 1 Introduction ........................................................................................................................ 5
1.1 Overview................................................................................................................................... 5
1.2 Components .............................................................................................................................. 5
Chapter 2 Connecting Cables .............................................................................................................. 6
Chapter 3 Function Introduction ........................................................................................................ 7
3.1 Indicator .................................................................................................................................... 7
3.2 Triggering Alarm ...................................................................................................................... 7
3.3 Signal Capture by Acceleration Sensor ..................................................................................... 7
3.4 Sending Signals from Terminal ................................................................................................. 8
Chapter 4 Specifications ....................................................................................................................... 9
DS-1530HMI Mobile Alarm Terminal
2
User Manual
COPYRIGHT ©2015 Hangzhou Hikvision Digital Technology Co., Ltd.
ALL RIGHTS RESERVED.
Any and all information, including, among others, wordings, pictures, graphs are the properties of Hangzhou
Hikvision Digital Technology Co., Ltd. or its subsidiaries (hereinafter referred to be “Hikvision”). This user
manual (hereinafter referred to be “the Manual”) cannot be reproduced, changed, translated, or distributed,
partially or wholly, by any means, without the prior written permission of Hikvision. Unless otherwise stipulated,
Hikvision does not make any warranties, guarantees or representations, express or implied, regarding to the
Manual.
About this Manual
This Manual is applicable to DS-1530HMI Mobile Alarm Terminal.
The Manual includes instructions for using and managing the product. Pictures, charts, images and all other
information hereinafter are for description and explanation only. The information contained in the Manual is
subject to change, without notice, due to firmware updates or other reasons. Please find the latest version in the
company website (http://overseas.hikvision.com/en/).
Please use this user manual under the guidance of professionals.
Trademarks Acknowledgement
and other Hikvision’s trademarks and logos are the properties of Hikvision in various jurisdictions.
Other trademarks and logos mentioned below are the properties of their respective owners.
Legal Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT DESCRIBED, WITH
ITS HARDWARE, SOFTWARE AND FIRMWARE, IS PROVIDED “AS IS”, WITH ALL FAULTS AND
ERRORS, AND HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT
LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR
PURPOSE, AND NON-INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL HIKVISION, ITS
DIRECTORS, OFFICERS, EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY SPECIAL,
CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS,
DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA OR
DOCUMENTATION, IN CONNECTION WITH THE USE OF THIS PRODUCT, EVEN IF HIKVISION HAS
BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE
WHOLLY AT YOUR OWN RISKS. HIKVISION SHALL NOT TAKE ANY RESPONSIBILITES FOR
ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER
ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS;
HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.
SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS IN YOUR
JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO ENSURE THAT YOUR USE CONFORMS
THE APPLICABLE LAW. HIKVISION SHALL NOT BE LIABLE IN THE EVENT THAT THIS PRODUCT IS
USED WITH ILLEGITIMATE PURPOSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE
LATER PREVAILS.
DS-1530HMI Mobile Alarm Terminal
3
Regulatory Information
FCC Information
FCC compliance: This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to correct the interference at his own expense.
FCC Conditions
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.
EU Conformity Statement
This product and - if applicable - the supplied accessories too are marked with "CE" and comply
therefore with the applicable harmonized European standards listed under the EMC Directive
2004/108/EC, the RoHS Directive 2011/65/EU.
2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted
municipal waste in the European Union. For proper recycling, return this product to your local
supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection
points. For more information see: www.recyclethis.info
2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as unsorted
municipal waste in the European Union. See the product documentation for specific battery
information. The battery is marked with this symbol, which may include lettering to indicate
cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to your supplier or to a
designated collection point. For more information see: www.recyclethis.info
Industry Canada ICES-003 Compliance
This device meets the CAN ICES-3 (A)/NMB-3(A) standards requirements.
DS-1530HMI Mobile Alarm Terminal
4
Safety Instruction
• Install the monitor in a proper place where can’t affect drivers sight.
• Do not disassemble the device by yourself.
• Do not place the device in damp or hot environment.
• Good ventilation is required for placing the device and do not place the device at the sun or extra bright places
to ensure the LED screen can be read.
• Regular inspection and maintenance is require
Preventive and Cautionary Tips
Before connecting and operating your device, please be advised of the following tips:
• Ensure unit is installed in a well-ventilated, dust-free environment.
• Keep all liquids away from the device.
• Ensure environmental conditions meet factory specifications.
• Ensure unit is properly secured to a rack or shelf. Major shocks or jolts to the unit as a result of dropping it
may cause damage to the sensitive electronics within the unit.
• Power down the unit before connecting and disconnecting accessories and peripherals.
• Improper use or replacement of the battery may result in hazard of explosion. Replace with the same or
equivalent type only. Dispose of used batteries according to the instructions provided by the battery
manufacturer.
DS-1530HMI Mobile Alarm Terminal
5
Chapter 1 Introduction
1.1 Overview
The mobile alarm terminal is pressed by the driver in emergency. The terminal provides three LED indicators,
respectively showing mobile DVR’s power status, recording status and error status, which is convenient for users
to know the mobile DVR’s status, as well as beneficial for malfunction investigation.
1.2 Components
The DS-1530HMI Mobile Alarm Terminal is composed of panic button, ERROR, RECORD, and POWER
indicators shown as the figure below.
Figure 1. 1 Physical Interface
Along with the mobile alarm terminal, an eight-meter long adapter cable is provided with one five-pin female
aviation plug for connecting to DVR and the other H2 × 2 interface for connecting to mobile alarm terminal. The
adapter cable is shown as below.
Figure 1. 2 Adapter Cable
DS-1530HMI Mobile Alarm Terminal
6
Chapter 2 Connecting Cables
DS-1530HMI Mobile Alarm Terminal is connected with mobile DVR by RS-232 shown as the figure below.
Figure 2. 1 Connection
H2 × 2
DS-1530HMI Mobile Alarm Terminal
7
Chapter 3 Function Introduction
3.1 Indicator
After the mobile DVR and mobile alarm terminal have been connected, the indicator shows the mobile DVR’s
working status. The terminal provides three LED indicators, respectively showing power status, recording status,
and error status.
POWER
Power on: green
Power down: unlit
RECORD
All cameras are recording: green
Part of cameras are recording: yellow
No camera is recording: unlit
ERROR
Connection with mobile DVR error: red
Video loss or abnormal storage media: red, flashing at 0.5s interval
Error types have been set and the user cannot modify them.
3.2 Triggering Alarm
When emergency happens, press the panic button and then release it. The terminal sends alarm information to
Mobile DVR which performs the following actions.
1. Pre-set camera alarm is reported to CMS (Content Management System).
2. Pre-set camera starts alarm recording.
The recording schedule should contain pre-recording time settings.
3. Release the panic button to stop alarm. When the post-recording stops, all of the triggered recording channels
stop alarm recording as well.
4. All the alarm time are recorded in video files and remote logs.
3.3 Signal Capture by Acceleration Sensor
A built-in acceleration sensor is used for capturing real-time acceleration signal and the default sampling period is
100ms. The function requires the proper installation position and you are recommended to place the terminal
horizontally, ensuring the Z-axis is vertical upward. The advancing direction is X-axis by default, and the
installation position is shown as the below.
DS-1530HMI Mobile Alarm Terminal
8
Figure 3. 1 Installation Position
Calibration is required before enabling acceleration sensor. Within the 10s after the power indicator lighted, press
the panic button for 3s, then the power indicator flashes for twice, indicating the calibration is successfully set.
3.4 Sending Signals from Terminal
The remote control is able to capture the signal not only sent by the Mobile DVR, but also by the terminal, which
greatly facilitates the Mobile DVR’s signal capture.
X+
Y+
Z+
DS-1530HMI Mobile Alarm Terminal
9
Chapter 4 Specifications
Table 4.1 specifications
Model
DS-1530HMI
Power Supply
5V/30mA or 12V/15mA
Indicator
three indicators to indicate power, record and error status
Dimensions (W×D×H)
80 mm ×30 mm × 19 mm (3.15" ×1.18" × 0.75")
Working Temperature
-10° C to 55° C (14° F to 131° F)
DS-1530HMI Mobile Alarm Terminal
10
Loading...