Hikvision DS-1273ZJ-130 User Manual

DS-1273ZJ-130

Wall Mounting Bracket for Dome Camera

Features:

 Aluminum alloy material with surface spray

treatment

 Design with cable entry hole
 Better water proof design
 Convenient installation coordinating with cap

Dimension:

Order Model:

DS-1273ZJ-130

Parameter:

Model

Parameters

DS-1273ZJ-130

Wall Mounting Bracket for

Dome Camera

Appearance

Hik White

Range of
Application

Suitable for dome camera wall mounting

Material

Aluminum Alloy

Dimension

132×183.5×228.5mm

Weight

690g

Notice:

 The bracket is for dome camera
 Pay attention to the color matching when select bracket
 The bracket should be installed on flat wall

 The wall must be capable of supporting over 3 times as

much as the total weight of the camera and the mount.

 The maximum load capacity of the bracket is 4.5KG

Model Suitable:

DS-2CD7X3PF(NF)-E(I)(Z),DS-2CD793PFWD-E(I)(Z)
DS-2CD793NFWD-E(I)(Z),DS-2CD7X4FWD-E(I)(Z)
DS-2CD7XXF-E(I)(Z),DS-2CD783F-EP
DS-2CD4112F-(I),DS-2CD4112FWD-(I)
DS-2CD4124F-(I),DS-2CD4132FWD-(I)

① Choose the appropriate

wall to fix the bracket
and wire

② Fix cap to bracket and

complete wiring

③ Screw up and fix the cap

④ Take adaptor from the

case of dome camera

A: Cable entry hole

B: Fastening screw

C: Bayonet of adaptor

⑤ Check the hole site and

fix adaptor to cap

⑥ Connect the cable and fix

dome camera to cap

⑦ Rotate the dome camera

moderately and screw up the
fastening screw

⑧ Installation complete

D: Fastening screw on dome

φ132

4-φ8.5

6-M4深8

83.5

46

83.5

158

85.7

228.5

120

183.5

Unit：mm

Installation Step:

Note: The actual bracket may vary from the picture above.