Hikvision DS-1272ZJ-110B User Manual

DS-1272ZJ-110B

Wall Mounting Bracket for
Dome Camera (with Junction Box)

Features:

 Aluminum alloy material with surface spray

treatment

 Design of cable entrance hole
 Better water proof design
 Junction box for better cable arrangement

Dimension:

Order Model:

DS-1272ZJ-110B

Parameter:

Model

Parameters

DS-1272ZJ-110B

Wall Mounting Bracket for

Dome Camera (with Junction Box)

Appearance

Hik White

Range of
Application

Dome camera wall mounting

Material

Aluminum Alloy

Dimension

123×180×227.8mm

Weight

1205g

Notice:

 Pay attention to the color matching when select bracket
 The bracket should be installed on flat wall

 The wall must be capable of supporting over 3 times as

much as the total weight of the camera and the mount.

 The maximum load capacity of the bracket is 4.5KG

Model Suitable:

DS-2CC51D3S-VPIR, DS-2CC52D5S-VPIR, DS-2CD2112(D)-(I),
DS-2CD2132(D)-(I)

① Choose the appropriate

wall to fix the junction
box

② Thread cable through

waterproof stopper

③ Install bracket to junction

box; thread the cable and
screw up

④ Screw adaptor cap to bracket

and fix with fastening screw;
thread the cable

A: Fastening screw

⑤ Take off lower dome and

inner dome module

⑥ Thread the cable and

fix module to adaptor
cap

⑦ Adjust the angle of view;

install lower dome and screw
up

⑧ Installation complete

Installation Step:

Note: The actual bracket may vary from the picture above.