Hikvision DS-1271ZJ-110 User Manual

DS-1271ZJ-110

Pendent Mounting Bracket for
Mini Dome Camera

Features:

 Aluminum alloy material with surface spray

treatment

 Indoor/Outdoor general design
 Internal routed cable design
 Cable entrance is reserved for convenient wiring

indoor

 Better water proof design

Dimension:

Order Model:

DS-1271ZJ-110

Parameter:

Model

Parameters

DS-1271ZJ-110

Pendent Mounting Bracket for Dome Camera

Appearance

Hik White

Range of
Application

Suitable for dome camera pendent mounting

Material

Aluminum Alloy

Dimension

150×560mm

Weight

1270g

Notice:

 The bracket should be installed on flat wall
 Waterproof rubber is necessary for outdoor application
 The wall must be capable of supporting over 3 times as

much as the total weight of the camera and the mount.

 The maximum load capacity of the bracket is 4.5KG

Model Suitable:

DS-2CC51D3S-VPIR, DS-2CD2112-(I), DS-2CD2132-(I)

① Choose the appropriate

wall to install the ceiling
plate and thread the
cable

② Connect pole and

adapter; thread cable and
screw up

③ Screw up and complete the

fixation of adapter and pole

④ Take off lower dome, inner

module and lining

Waterproof rubber is necessary for
outdoor application

A&B: Tightening Screw

⑤ Thread the cable and fix

inner module to
adaptor

⑥ Adjust the view angle of

camera

⑦ Install lining and lower dome

alternatively to inner module
and fix them

⑧ Installation complete.

Installation Step:

Note: The figure of Speed Dome in “Installation Step” is only for your reference; please adhere to our real products.