Hikvision DS-1212ZJ Specsheet

DS-1212ZJ(-S)

Features:

 Die casting aluminum with surface spray treatment
 Design with cable entry hole

 Sponge pat is fixed on the surface of substrate to

ensure the stabilization of camera

 The soleplate is rotatable for monitoring scene

adjustment

Dimension:

Order model:

DS-1212ZJ DS-1212ZJ-S

Parameters:

Model

Parameter

DS-1212ZJ

DS-1212ZJ-S

Wall Mounting Bracket

Color

Hik white

Silver

Feature

Suitable for box, bullet and zoom camera

wall mounting

Material

Aluminum alloy

Angle

Horizontal:360°; Vertical:-45°~45°

Dimension

65×95×188.5mm

Weight

360g

Configurable

Bracket

DS-1275ZJ (vertical pole mount)

Notice:

 Pay attention to the color matching as selecting bracket
 The bracket is installed on the flat surface of a wall
 The diameter of hole site is within 6.5mm
 The distance between two screw hole is 13~33mm
 The wall must be capable of supporting more than 3

times the total load of the camera and the mount.

 The Max. capacity load of bracket arm is 8.5kg
 The maximum load capacity of the mount is 2.5KG

①Choose the appropriate wall to mount the bracket

②Complete the fixation and wiring

A: Screw of vertical adjust; B: Screw of Horizontal adjust

③Unscrew the vertical adjusting screw and get

the soleplate out of the camera.

C: Installation base of camera

④ Fix the camera onto the base and screw up

⑤ Fix the IPC & base onto the bracket and

screw up

⑥ Wiring and adjust the site and angle of IPC

A

B

C

Wall Mounting Bracket

Installation step:

Note: The actual bracket may vary from the picture above.