Hikvision CB135 Specsheet

Waterproof D

esign

CB135

Appearance

Hikvision white

Application

Wire intake box

Material

Aluminum alloy

Dimension

Ø5.39"

x 1.65

" (Ø137 mm x 42 mm)

Weight

9.88 ozs (

28

0 g)

CB135

Conduit Base

NOTES: Pay attention to color matching and special

installation instructions on back of this sheet
for select cameras.

Aluminum Alloy Material with Surface

Spray Treatment

Available model

CB135

Dimensions

Dimensions

DimensionsDimensions

NOTE: The actual bracket may vary from the picture above.

© 2020 Hikvision USA Inc. • All Rights Reserved • Specifications subject to change without notice.
Hikvision USA Inc., 18639 Railroad Street, City of Industry, CA 91748, USA • Hikvision Canada, 4848 rue Levy, St-Laurent, Quebec, Canada, H4R 2P1
Tel: [phone] • Toll Free in USA: [phone] • E-Mail: [e-mail] • www.hikvision.com 030520NA 

Special Installation Instructions for Select Cameras Only

1. Twist to remove trim ring from

camera mounting

Some cameras require the following instructions when installing the CB135 (e.g., DS-2CD23x5G1,
DS-2CD23x7G1, DS-2TD1217-2/3/6/V1, and others).

base.

2. Loosen locking screw on camera mounting
base.

3. Detach camera mounting base from camera.

4. Position camera mounting base on CB135
conduit base.

5. Align four screw holes on the camera mounting
base to the four inner screw hole posts on the
CB135.

6. Attach camera mounting base to the CB135 with
four screws.

Do not use the three outer screw
holes on the CB135 rim; you must use
the four inner screw hole posts.

Figure 1, Attaching CB135 to a

Select Camera Model (Typical)

© 2020 Hikvision USA Inc. • All Rights Reserved • Specifications subject to change without notice.
Hikvision USA Inc., 18639 Railroad Street, City of Industry, CA 91748, USA • Hikvision Canada, 4848 rue Levy, St-Laurent, Quebec, Canada, H4R 2P1
Tel: [phone] • Toll Free in USA: [phone] • E-Mail: [e-mail] • www.hikvision.com 030520NA 