Henny Penny HC-5 Specifications

PROJECT QUANTITY ITEM NO

Heated holding cabinet

General Information

Henny Penny heated holding cabinets are designed to hold a wide range of cooked foods at safe temperatures for long periods of time prior to serving.

The HCN-5 is a half-size heated holding cabinet produced in China and developed for small grocery stores and quick-service retail chains in the Asian region. A shallower footprint is designed to hold half-size sheet pans sideways. This compact operating depth helps maximize kitchen space and efficiency and makes the HCN-5 the ideal choice for cost-conscious foodservice

HCN-5 half-size heated holding cabinet with flip-up panels in door. Holds up to 5 half-size sheet pans.

operators who wish to obtain the product quality and productivity benefits that Henny Penny holding cabinets are well known for.

The HCN-5 features “flip up” panels built in to the door that allow workers to pick product from upper or lower trays without opening the

MODEL HCN-5 hal

-size

door. This saves time and energy in the kitchen. Units are also commonly ordered in pass-through design, with a rear door offering convenient access from both cooking and service sides.

Additional standard features such as stainless steel construction, fully insulated cabinet walls, and selfclosing doors help protect food quality, reduce waste and provide for more efficient workflow.

Heavy-duty fan and ventilated side racks allow hot, moist air to circulate evenly throughout the cabinet and keep practically any menu item hot and tasty until serving. And that translates into higher food quality and less waste throughout the day.

Simple electro-mechanical controls feature thermostat-controlled heat that lets you adjust the environment to best suit the food product being held.

Standard Features

 Heated holding for up to 5 half-size

sheet pans sideways in a shallow footprint for smaller kitchens.

 Durable, stainless steel

construction, interior and exterior.

 Electro-mechanical controls feature

thermostat temperature control, dial thermometer, ON/OFF and cycle temperature lights.

 Two clear acrylic flip-up panels in

front door for visibility and specific product access.

 Energy-efficient dual pane window

glass in rear door (pass-through

 Heavy-duty blower motor.  Ventilated side racks.  Removable air ducts for easy

cleaning.

 Full perimeter door gasket.  Fully insulated sidewalls and

control module.

 Self-closing, lift-off doors stay open

past 90 degrees of arc.

 Partial pan removal for convenient

loading and unloading.

 Magnetic door latch and heavy-duty

plated hinges.

 Stainless steel water pan, standard.

units.)

 APPROVED  APPROVED AS NOTED  RESUBMIT

Please specify desired configuration

Door hinge  Right OR  Left

Style  Pass-through OR  Solid back

AUTHORIZED SIGNATURE DATE

PROJECT ITEM NO

)



Heated holding cabinet

Dimensions

Height: 832 mm (32 3/4 in.) Width: 610 mm (24 in.) Depth: 445 mm (17 1/2 in.)

Required clearances: N/A Crated dimensions

Length: 940 mm (37 in.) Depth: 559 mm (22 in.) Height: 749 mm (29 1/2 in.) Volume: 0.39 m³ (13.9 cu. ft.)

Crated weight: 74 kg (162 lbs.) Water connections: N/A Heating

Temperature range: 71-99C (160-210F)

Humidity: 1.9 liter (1/2 gal.) water pan Pan capacity

Accepts up to 5 half size sheet pans 457 x 330 mm (18 x 13 in.) on 102 mm (4 in.) centers.

610 mm (24 in.)

832 mm

(32 3/4 in.)

445 mm(17 1/2 in.

Electrical

Volts Phase Cycle/Hz Watts Amps Wire Plug

240 1 50 1320 5.5 1NG

HCN-5 hal

MODEL

Power cord from back or top

PLAN

FRONT

240V

Type I

-size

Bidding Specifications

 Provide Henny Penny Model HCN-5 half-

size heated holding cabinet, designed to hold hot foods in quality condition at safe temperatures for long periods of time.

 Unit shall be designed for shallow footprint

and accept half-size sheet pans in sideways orientation.

 Unit shall have electro-mechanical controls

with thermostat-controlled adjustable heat.

Continuing product improvement may subject specifications to change without notice.

 Provide choice of right or left-hand doors.  Provide choice of solid back or pass-through

design.

 Unit shall include 2 clear acrylic flip-up

panels on door. If pass-through, flip-up panels on front door, only.

 If pass-through, unit shall have dual-pane

glass door on rear.

Henny Penny Corporation

PO Box 60 Eaton OH 45320 USA +1 937 456.8400 800 417.8417

+1 937 456.8434 Fax 800 417.8434 Fax

www.hennypenny.com

Cabinet interior and exterior shall be of

stainless steel construction.

 Unit shall have full perimeter door gasket and

fully insulated sidewalls and control module.

 Unit shall have heavy-duty blower motor and

ventilated side racks.

This product manufactured in Suzhou, China