2 PIECE SOLAR LIGHT SET
95745
ASSEMBLY AND OPERATING INSTRUCTIONS
Visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Copyright© 2008 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any artwork
contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight
Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual
product may differ slightly from the product described herein. Tools required for assembly and service may not
be included.
For technical questions or replacement parts, please call 1-800-444-3353.
Revised Manual 10f
THANK YOU for choosing a HARBOR FREIGHT TOOLS product. For future reference, please complete
the owner’s record below:
Model______________ Serial No._____________ Purchase Date_______________
SAVE THE RECEIPT, WARRANTY AND THESE INSTRUCTIONS. It is important that you read the
entire manual to become familiar with the unit BEFORE you begin assembly.
Technical Specifications
Material: Injection molded ABS plastic body
LED’s (3) Super Bright White
Switch Type: 2 way push button photo/cell eye for auto on/off
Power: 2 “AA” 1.2 VDC, 600 mAh rechargeable and replaceable Ni-Cd
Panel Dimensions: 4.5” diameter
Weight: .7 lb.
Overall Dimensions: 13” H X 5-3/4” W
Safety Warnings and Precautions
WARNING: When using product, basic safety precautions should always be followed to
reduce the risk of personal injury and damage to equipment.
Read all instructions before using this product!
1. Keep work area clean. Cluttered areas invite injury.
2. Observe work area conditions. Keep work area well lit. Position the Solar Spotlights in an
unobstructed area that receives sunlight at least six hours a day.
3. Check for damaged parts. Before using any product, any part that appears damaged should
be carefully checked to determine that it will operate properly and perform its intended function.
Check for any broken or damaged parts and any other conditions that may affect its operation.
Replace or repair damaged or worn parts immediately. Do not use the Solar Spotlights if any
switch does not turn on and off properly.
4. Replacement parts and accessories. When servicing, use only identical replacement parts.
Use of any other parts will void the warranty.
5. Always check hardware and assembled parts after assembling. All connections should be
tight and hardware tightened.
6. Keep children away. Children must never be allowed in the work area. Do not let them handle
the Solar Spotlights.
7. Store idle equipment. When not in use always lock up the Solar Spotlights and keep it out of
the reach of children.
8. Dress properly. Protective, electrically nonconductive clothes and nonskid footwear are
recommended when working with the Solar Spotlights. Wear restrictive hair covering to contain
long hair.
SKU 95745 For technical questions please call 1-800-444-3353. Page 2