Instruction Manual
HI 180
Magnetic Stirrer
http://www.hannainst.com
These Instruments are in
Compliance with the CE Directives
Dear Customer,
Thank you for choosing a Hanna product. This manual will
provide you with the necessary information for a correct
operation. Please read it carefully before using the controller. If you need additional technical information, do not
hesitate to e-mail us at tech@hannainst.com.
These instruments are in compliance with the directives.
PRELIMINARY EXAMINATIONPRELIMINARY EXAMINATION
PRELIMINARY EXAMINATION
PRELIMINARY EXAMINATIONPRELIMINARY EXAMINATION
Remove the instrument from the packing material and
examine it carefully. If any damage has occurred during
shipment, immediately notify your Dealer or the nearest
Hanna Customer Service Center.
Note: Conserve all packing material until the instrument
has been observed to function correctly. Any defective
items must be returned to the Dealer in its original
packing.
GENERAL DESCRIPTIONGENERAL DESCRIPTION
GENERAL DESCRIPTION
GENERAL DESCRIPTIONGENERAL DESCRIPTION
HI 180 is a compact and lightweight magnetic stirrer. Lack
of laboratory bench space is no longer a concern.
It incorporates electronic controls that allow the user to
regulate the speed with greater precision.
In addition to speed control, the SpeedsafeTM system
will assure that the maximum speed (1000 rpm) is never
exceeded.
Several HI 180 stirrers can be placed on the laboratory
bench and the colors will help in recognizing the different
samples.
The plastic cover of these stirrers will resist the harmful effects
of any accidentally spilled chemical.
Each stirrer is supplied with a 25 mm long (7 mm as
diameter), PTFE coated, magnetic stir bar.
SpeedsafeTM is a Trademark of "Hanna Instruments".
HI 180 stirrers are available in two voltage versions
("/D" = 220/240V and "/U" = 110/115V) and in nine
colors as follows:
MODEL COLOR
HI 180 A yellow
HI 180 B light sea-green
HI 180 C light blue
HI 180 D citron
HI 180 E green
HI 180 F dark blue
HI 180 G red
HI 180 H grey
HI 180 I ivory
SPECIFICATIONSSPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONSSPECIFICATIONS
HI 180
Maximum Stirring 1 Liter (0.26 gallons)
Capacity
Speed Range
Min. 100 rpm
Max. 1000 rpm
Power Supply
HI 180/U 110/115V, 50/60 Hz
HI 180/D 220/240V, 50/60 Hz
Installation Category II
Cover Material ABS plastic
Environment 0 to 50ºC (32 to 122ºF)
95% RH max.
Dimensions dia. 137 mm x 51 mm (h)
(5.39 x 2”)
Weight 640 g (1.4 lb.)
FUNCTIONAL DESCRIPTIONFUNCTIONAL DESCRIPTION
FUNCTIONAL DESCRIPTION
FUNCTIONAL DESCRIPTIONFUNCTIONAL DESCRIPTION
THE FRONT PANEL
1. Power indication (LED lights up when there is
power supply)
2. Speed knob (for rpm setting with ON/OFF)
continuously variable up to the maximum
THE REAR PANEL
21
1) Fuse holder for 200 - 250V fuse
2) AC power cord.
Unplug the stirrers from the power supply before
replacing the fuse.
OPERATIONAL GUIDEOPERATIONAL GUIDE
OPERATIONAL GUIDE
OPERATIONAL GUIDEOPERATIONAL GUIDE
• Make sure that the SPEED knob is in the OFF position.
• Place a beaker or glass container on the top of the
stirrer and place the stirring bar at the center of the
beaker base.
• Pour the liquids to be mixed into the beaker. Do not fill
the brim and leave sufficient space to prevent spillage
during stirring.
• Connect the power cord to the mains.
• Adjust the SPEED knob slowly until the required stirring
speed is achieved.
• Allow sufficient time for the mixing operation to attain
uniform rotational flow.
• After stirring is complete, turn the SPEED knob to OFF
position.
• If no further stirring is required, disconnect the power
supply.
ACCESSORIESACCESSORIES
ACCESSORIES
ACCESSORIESACCESSORIES
HI 731319 Micro stir bar (10 each)
CE DECLARATIONCE DECLARATION
CE DECLARATION
CE DECLARATIONCE DECLARATION
OF CONFORMITYOF CONFORMITY
OF CONFORMITY
OF CONFORMITYOF CONFORMITY
Recommendations for Users
Before using these products, make sure that they are entirely suitable for the environment in which they are used.
Operation of these instruments in residential areas could cause unacceptable interferences to radio and TV equipment.
Any variation introduced by the user to the supplied equipment may degrade the
instrument's EMC performance.
WARRANTYWARRANTY
WARRANTY
WARRANTYWARRANTY
All Hanna Instruments stirrers are warranted for two
years against defects in workmanship and materials when
used for their intended purpose and maintained according
to the instructions. Damages due to accident, misuse,
tampering or lack of prescribed maintenance are not covered. This warranty is limited to repair or replacement free
of charge. If service is required, contact the dealer from
whom you purchased the instrument. If under warranty,
report the model number, date of purchase, serial number
and the nature of the failure. If the repair is not covered by
the warranty, you will be notified of the charge for repair or
replacement. If the instrument is to be returned to Hanna
Instruments, obtain a Return Goods Authorization from the
Customer Service Department first and then send it with
shipment cost prepaid. When shipping any instrument,
make sure it is properly packaged for complete protection. To
validate your warranty, fill out and return the enclosed
warranty card within 14 days from the date of purchase.
All rights are reserved. Reproduction in whole or in part is
prohibited without the written consent of the copyright
owner, Hanna Instruments Inc., Woonsocket, Rhode Island,
02895 , USA.
Hanna Instruments reserves the right to modify the design, construction and appearance of its products without advance notice.
ISTR180R2 10/97
Loading...