Hallde CC-32 User Manual

AB Hällde Maskiner

P.O. Box 1165, 164 26 KISTA

Tel: [phone]

www.hallde.com

Manufacturer

HALLDE

Model

CC-32

Product Description

Combi Cutter 2 kg/minute

Origin

Sweden, European Union

SPECIFICATIONS

Function Machine for slicing, dicing, shredding, grating and cutting julienne as well

as grinding, chopping, blending and mixing.
Processes fruit, vegetables, dry bread, cheese, nuts, mushrooms, meat,
fish, etc.

Capacity 2 kg/minute, 10-80 portions/day, 3 litre bowl.

0.9 litre feed cylinder, 53 mm tube feeder for elongated products.

Material Machine base: ABS-plastic. Knife chamber: aluminium.

Feeder top: polycarbonate and polyamide. Bowl: stainless steel.
Knife unit: acetal. Knives: stainless steel. Lid: polycarbonate.

Motor 1.0 kW, Two speeds (500 rpm, 1450 rpm).

230 V, single phase, 50-60 Hz.
Transmission: Toothed belt. Thermal protection.

Power supply Earthed, single phase, 10 A. Fuse: 10 A delayed action fuse.

Standards EU Directive 2006/42/EC, 2006/95/EC, 2004/108/EC.

NSF/ANSI Standard 8.

Safety CE approved.

Two safety switches, machine safety: IP34 .

Recommended
accessories

4-pack cutting tools:

 Slicer 2 mm
 Slicer 4 mm
 Grater/Shredder 2 mm
 Julienne 2x2 mm

Weights Machine: 11 kg Freight: 14 kg

Dimensions Width Height Depth Volume

Machine dimensions 285 mm 465 mm* 350 mm

Freight dimensions 410 mm 715 mm 410 mm 0.120 m

* Maximum height with pusher plate open 585 mm

3

AB Hällde Maskiner 2013-07-21 100 ex Elanders

Specification text

Drawings

Combination machine with half-moon feed cylinder and stainless steel bowl,
made to process 2 kg/minute or 10-80 portions/day. Machine has two speeds
which switch depending on what preparation top is mounted. Machine is
controlled with a turning knob instead of buttons. Vegetable preparation top is
of 0.9 litre with a tube feeder of 53 mm in diameter. Bowl is 3 litre. Knives for
bowl cutter are serrated. Machine base is made of ABS-plastic and the knife
chamber of aluminium. Machine is controlled with a turning knob instead of
buttons. Cutting tools are made of stainless steel, 185 mm in diameter and
washable in dishwasher. Motor rotate the cutting blade clockwise via a self­tensioned toothed belt. Machine has handles for easy mobility.

The drawings below can be downloaded at hallde.com.

285

150

440

335

CC34CF.dwg CC34CU.dwg CC34CS.dwg

250

405

285

585

150

465

350

CC34FF.dwg CC34FU.dwg CC34FS.dwg

250