Haier LET50C800HF User Manual

0 (0)

Welcome Important Information

01 Safety Warnings

2 Safety notice Warning and cautions

Main Parameter Base Stand Assembly Instruction

02 Introduction

7 Wall Mounting Installation Guidelines Control Panel

9 Rear/Side Sockets

9 Connecting your Haier TV Common Interface

Remote Control

03 Remote Control

12 Teletext

Installation Guide

04 Operation

CHANNEL MENU 15

Auto Tuning (DVB-T) 15 Auto Tuning (DVB-C) 16

DTV Manual Tuning (DVB-T) DTV Manual Tuning (DVB-C) ATV Manu al Tuning

PICTURE MENU 18

SOUND MENU

TIME

OPTION MENU

LOCK MENU

EPG Menu(Electronic Program Guide)

PVR function

Prepare to record the program

Rec ord the program

Play the record

Timeshift function

Prepare to record the program

USB D rive Storage Form at

Rec ord a paused DTV pro gram to USB storage device

Timeshift limitations

USB Player

Trouble shooting

05 Trouble shooting

Specification 28

Program edit

CI information

Thanks for buying this 50" LED LCD TV . This guide will help you set up and

begin using your TV.

IMPOR

TANT INFORMATION

READ ALL INSTRU

CTIONS BEFORE USE AND KEEP FOR FUTURE REFERENCE.

CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).NO USER SERVICEABLE PARTS INSIDE.

FOR ANY PROBLEMS, REFER SERVICING TO THE CUSTOMER HELP LINE. THERE IS A LIGHTNING ARROW SYMBOL IN THE TRIANGLE: THIS SYMBOL INDICATES HIGH VOLTAGE IS PRESENT INSIDE. IT IS DANGEROUS TO MAKE ANY KIND OF CONTACT WITH ANYINSIDE PART OF THIS PRODUCT.

THERE IS A EXCLAMATION MARK IN THE TRIANGLE: THIS SYMBOL ALERTS YOU THAT IMPORTANT LITERATURE CONCERNING OPERATION AND MAINTENANCE HAS BEEN INCLUDED WITH THIS PRODUCT.

CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK AND FIRE, DO NOT PUT THE TV SET NEAR

SOURCES OF HUMIDITY. DO NOT USE ANY ABRASIVE CLEANERS WHICH MAY SCRATCH OR DAMAGE THE LCD SCREEN. AVOID CONTACT WITH OBJECTS THAT MAY SCRATCH THE LCD SCREEN.

NOTE: SERVICING THE UNIT YOURSELF IS UNAUTHORISED AND COULD LEAD TO INJURY OR PRODUCT

DAMAGE. REFER ALL SERVICING TO THE CUSTOMER HELPLINE.

Now you can get star

ted!

01 Safety warnings

50" Full HD 1080P Digital Remote control

Instruction Manual Quick start guide

AAA ba x2ttery

LED LCD TV

Scart Cable x 1 Stand

the

Safety notice

EN-3

Dim:515*320mm(不包括底座）

Warning High voltages are used in the operation of this television receiver. Do not remove the cabinet back from your set. Refer servicing to qualified service personnel.

Warning To prevent fire or electrical shock hazard, do not expose the television receiver to rain or moisture.

Warning Do not drop or push objects into the television cabinet slots or openings. Never spill any kind of liquid on the television receiver.

Caution Do not block the ventilation holes in the back cover. Adequate ventilation is essential to prevent failure of electrical components.

Caution Do not trap the power supply cord under the television receiver.

Caution Never stand on, lean on, or suddenly push the television or its stand. You should pay special attention to children. Serious injury may result if it should fall.

Caution Do not place your television on an unstable cart, stand, shelf or table. Serious injury to an individual , and damage to the television, may result if it should fall.

Caution When the television receiver is not used for an extended period of time, it is advisable to disconnect the AC power cord from the AC outlet.

Caution If the television is to be built into a compartment or similar enclosure, the minimum distances must be maintained. Heat build-up can reduce the service life of your television, and can also be dangerous.

WARNING AND CAUTIONS

EN-4

INSTALLATIONCAUTION

*Locate the TV in the room where light does not strike the screen directly. *Total darkness or a reflection on the picture screen can cause eyestrain. Soft and indirect lighting is recommended for comfortable viewing. *Allow enough space between the TV and the wall to permit ventilation. *Avoid excessively warm locations to prevent possible damage to the cabinet or premature component failure. *Do not cover the ventilation openings when using theTV.

Main parameter

Main features

4 NICAM；

5 T ；ime-shift

HDMI interface and SCART

Inter face；

High luminance, wide viewing

angle；

Used as Television, display terminal,

PC display；

Never tamper with any components inside the TV, or any other adjustment controls not described in this manual. All LED-TV's are high voltage electrical equipment. When you clean dust or any water drops off the SCREEN or CABINET or around any of the buttons or connectors, the power cabled should be removed from the power socket. Wipe the TV with a soft, dry, dust free cloth. During thunderstorms, unplug the power cable and aerial / antenna cable to prevent damage to your TV and any other devices connected to it. All repairs to this TV should only be performed by qualified TV service personnel.

02 Introdution

Introduction

EN-5

Panel

TV System

PAL-B/G 、I、D/K SECA M- B/G 、D/K、L、 L

Video Signal System PAL/SECAM I

nput Power V oltage AC 100-240 V 50/60Hz

Power consumption

Audio

Output Power （THD 7% ）

2x8W

Signal Input

Analog RGB(PC) x1; PC audio x1

High-Definition Multimedia Interface (HDMI)x2 Video I nput x1 Audio Input x1 YPb Prx1

Mini SCART x 1

120W

CI x 1 USB x 1 RF Co-Ax x 1

Standby Power consumption

<0.5W

Horizontal definitio n（TV line）

Composite Video

input >=350

YPbPr >=400

PRESET MODE

1024x768

1280x1024

640x480

31.47

800x600

37.88

48.36

63.98

RESOLUTION

V.Freq.(KHz) H.Freq.(KHz)

1360x768

47.7

Introduction

EN-6

1920x1080

66.64

Base Stand Assembly Instruction

1. Place the TV with the display side down on a flat surface. Use a cloth to protect .the

display Position the stand base plate onto the bottom of the stand pole.

2. Attach the stand base plate to the stand pole

by firmly tightening the supplied screws.

INSTALLATION NOTES

Locate the TV in a room where light does not strike the screen directly. Total darkness or a reflection on the screen can cause eyestrain. Soft and indirect lighting is recommended for comfortable viewing.

Allow enough space between the TV and the wall to permit ventilation.

Avoid excessively warm locations to prevent possible damage to the cabinet or premature component failure.

Please do not attempt to rotate the TV on the stand.

Introduction

EN-7

WALL MOUNTING INSTALLATION GUIDELINES

2.Remove the screws from the lower part of the

television, where the base joins to the TV, and take away the stand (put the stand somewhere safe for future use).

1.Place the LED LCD Television onto a solid surface. Please place some soft material over the front of the screen to protect it from any damage.

3.Use the four screws provided to fix the TV onto a wall mounting bracket (not included) via the four VESA standard holes on the back of the television.

Introduction

EN-8

This television can be wall mounted as follows:

M6x9

200mm

AC-INPUT 100-240V~50/60Hz

PrVIDEO L R HDMI2

Rear/Side Sockets

Remote control sensor. Indicator LED:

BLUE: POWER ON. RED: STAND BY.

Key board.

SOURCE

Display the input source menu.

Display main MENU.

CH+/CH-

In TV mode,press CH+ or CH- to change the channel up and down. In MENU, press CH+ or CH- to select items .

STANDBY

VOL+/VOL-

Adjust sound level. In MENU,adjust the item that you selected.

Introduction

Front control panel

EN-9

input

YPbPr

input

SCART

input

PC AUDIO input

L/R AUDIO

Intput

10 11

Input

input

6 7 8

AC Power Source

HDMI2

input

HDMI1

USB

COMMON INTERFACE(CI)

VGA INPUT ANT

Intput

30 30

SOURCE

CH+ CH- VOL+ STANDBYVOL-

2 3 4 5

Introduction

EN-10

Connecting a DVD p layer / Sa tellite / cabl e set t op box rec eiver / game s conso le / PC or Laptop

The re are several op tions t o conne cting a D VD pla yer / Satellite or Cable set top box rec eiver / games console / PC or Lap top to your TV.

Option 1 SCART

Connect a SC ART cable (not supplied) from the SCART socket on the TV to the DVD pla yer / Satellite or cable set top box receiver or games consol. To select the device connected with the SCA RT cable press t he SOURCE butto n on the remote and use the keys t o selec t SCART and p ress th e OK button.

Note:- The TV will default to the SCART connection when the TV is switched on.

Option 2 HDMI

If th e device you want to connect to the is switched on, switch off the device first. Connect a HD MI cable (not supplied) from the HDMI socket on the TV to the DVD player / Satellite or cable receiver or games consol. Swi tch on the device you have just con necte d to the TV To select the device connected with the HDMI cable press the SOURCE button on the remote and use the keys t o selec t HDMI and press the OK button.

Option 3 AV Audio Visual

(Yellow/White/Red) Mak e sure th at both T V and the d evice are switched off before connecting. Connect the AV cables (not supplied) from the Video (yellow) and Audio (white, red) sockets on the TV to the DVD player or games console etc. To select the device connected with the AVI cable press the SOURCE button on the remote and use the keys t o selec t AV and pre ss the OK b utton.

Option 4 COMPONENT (Green/Blue/Red)+(White/Red)

Mak e sure th at both T V and the device are switched off before connecting.

Connect th e cable s (not su pplie d) from t he

COMPONENT IN sockets Y, Pb, Pr (green, blue, red) and L-Audio-R (white, red) on the T V to th e DVD player o r games c onsol e etc.

To select th e devic e connected with the AVI cab le pres s the SOU RCE but ton on the rem ote and u se the ke ys to select COMPONENT and p ress th e OK button.

Opt ion 5 VGA (15pin S ub-D)

Connect a VGA cab le (not s uppli ed) from the VGA s ocket o n the TV to t he PC / Laptop. To select th e PC / Lapt op conn ected w ith the VGA c able pr ess the SOURCE b utton o n the rem ote and use th e keys to select PC and

press the OK button. Not e VGA i s video o nly. For au dio fro m your PC/Laptop you need to connect a sep arate cable from the PC Audio (3.5mm jack) to the headphone socket on you PC/Laptop (3.5mm jack)

Opt ion 6 USB

Most USB sticks can be connected to your TV and s ome dig ital ca meras may al so work . Connect US B stick ( not sup plied ) or a USB cable (not supplied) to the TV. To select the USB device connected to the TV, pre ss the SO URCE bu tton on the re mote an d use t he keys to select USB and press the OK button.

Note1:Only *.jpg and *.mp3 files will work, oth er file t ypes ar e not gua ranteed an d may not .

Note 2. Apple iPhones and iPods are not compatible with your TV.

Note 3. When connecting any device to the USB connection, keep the USB cable length as short as possible.

Connecting to your Haier TV

The common i nterface (CI ) slot is d esign ed to accept the conditional Access (CA) Module and Smart card in order to view the pay TV programmes and additional services. Contact your Common Interface service provider to ge t more infor matio n about t he modu les and subscription. Please noted that CA modules and smart cards are neither supplied nor optional accessories from us.

COMMON INTERFACE

CHANNEL

PICTURE

SOUND

TIME

OPTION

LOCK

Auto Tuning

ATV Man ual Tuni ng Programme Edit Signal Information

DTV Manual Tuning

Software Update(USB)

CI Information

MENU MOVE OK

Introduction

EN-11

1.POWER:Pres s to turn o n the TV.

2.D.MENU:No function.

3.P.Mode:To switch picture mode.

4.INFO:Press to d isplay the c urren t signa l

status,including input source and channel audio mode.

5.AUDIO I/II: Press to se lect MONO,Nicam stereo for ATV ch annel . Selec t Audio l angua ge for DT V chann el.

6.SUBTITLE:Pres s to turn t he subt itle On or Off.

7.Number Buttons:For dire ct acce ss to cha nnels .

8.SOURCE:To select i nput so urce.

9.MUTE:To disabl e or enab le the so und out put.

10.Volume Control:To adjust sound level.

11.MENU:To display TV me nu.

12.OK:To confirm selection.

13.EXIT:To retur n to the pr eviou s menu or e xit men u.

14.Teletext Index/USB PLAY

15.REPEAT:No fu nction

16. Tele text Gr een But ton / USB Fast Forwa rd

17. Tele text Re d Butto n / USB Fast R ewind

18.Teletext Mix

19.Teletext Text

20.Teletext Reveal

21.Teletext Size

22.Teletext Time/ANGLE/REC.LIST(tele text ti me is no

function)

23.Teletext Mode:No function

24.Teletext Hold

25.Teletext Subcode:Teletext Subpage

26. Tele text Bl ue Butt on / USB Nex t File

27.Teletext Yellow Button / USB Pre vious File

28.USB STOP

29.USB PAUSE

30.START RECORD

31.UP,DOWN,LEFT,RIGHT Cursor:Pre ss to naviga te

your selection.

32.Fav:To acces s your favou rite ch annel s list in T V or DTV mod e.

33.Select Programme:Press

▲▼ Butto n to sele ct the

nex t or prev ious TV c hanne l.

34.GUIDE:Press to d isplay ele ctron ic prog ramme gui de in TV mo de.

35.Q.View:To acc ess the p revio usly viewe d chann el.

36.CH.LIST: Press to dis play th e chann el list.

37.Screen:To change picture aspect ratio.

38.Sleep :Set timer to turn of f the TV.

39.S.Mode:To switch sound mo de.

40.OPEN/CLOSE:No Functi on

:No DVD function

Remote Control

03 Remote Control

Insert Batteries Into the Remote Control

1. Remove the battery cover.

2. Inserting the 2 AAA 1.5V batteries making sure the polarity(+ or -) of the batteries matches the polarity marks inside the unit

3. Mount the battery cover. Replace with new batteries when the TV set begins to show the following symptoms: Operation is unsteady or erratic. Sometimes the TV set does not function with Remote Control Unit.

Remark:

1) Alkaline Battery Recommeded.

2) Remove batteries when they are exhausted or if the remote control is not to be used for long time.

EN-12

TEXT

SELECTING A PAGE

DIRECT ACCESS

TO THE ITEMS

INDEX

SUB PAGE

HOLD

REVEAL

Press:

You will obtain :

LIST

TELETEXT

Enter the number of the page required using the 0 to 9 up/down. Example: page 120, enter 120. The number is displayed top left, the counter turns and then the page is displayed. Repeat this operation to view another pa ge. If the counte r continues to s earch, this mean s that the page is not transmitted. Select another number.

Coloured a re as are displayed a t the bot tom of the scree n. The 4 coloured keys are used to access the items or corresponding pages. The coloured areas flash when the item or the page is not yet available.

This returns to the contents page (usually page 100).

Cer tain page s contain sub-page s which a re automatically disp layed successively. This key is used to stop or resume sub-page acq uisition. The indication appears top left.

To freeze the page.

To display or hide the concealed information (games solutions).

The user can set four favorite p ages to be direc tly linke d to the four co lor keys. While l ist mod e is activated, it is not possi bilit y to use TOP or FLOF navigation with the colorkeys. The favorite page numbers should be sto red and restored to/f rom nonvol atile memory for eac h chann el by the system software.

This is used to call or exit teletext modes. The summary appears with a list of items that can be accessed. Each item has a corresponding 3 digit pa ge num ber. If th e chann el sele cted do es not broadcast telete xt, theindication 100 w ill be di splayed and th e screen will remain blan k (in thi s case, exit teletext and select another channel).

Teletext is an information system broadcast by certain channels which can be consulted like a newspaper. It also offers access to subtitles for viewers with hearing problems or who are not familiar with the transmission language(cable networks, satellite channels, etc.)

Remote Control

EN-13

Operation

04 OPERATION

Please select on OSD language

Czech

English

French

Italian

Greek

Spanish

Deutsch

Magyar

Nederlands

Polski

Russian

Romanian

Password

Please enter old password

Please enter new password

Confirm new password

Home Mode

Mode Sele ct

Shop Mode

The installation guide only appear when the TV first

time turn on or reset to factory set.

Installation Guide

1).Press the ▲▼ buttons to navigate the menu and

change the settings. Press the OK button to confirm.

Select your desired language ,Home/Shop Mode to be

displayed on the menu.

2). Press the buttons to select DVB-T/DVB-C and then press the OK button to confirm.

French

Italy

Greece

Nederlands

Poland

Germany

Hungary

Luxembourg

Norway

a. If you select DVB-T, the next step is to selec t the Tune type and country then press the OK button to start tuning.

b. If you select DVB-C, the next step is to config the DVB-C system like (scan type / Frequency/ Network ID/Sy mbol(KS/S) then press OK button to into the tune type and country select menu, this step is the same as DVB-T, select the tune type (DT V/ATV). Choose the right country, press OK button to start tuning.

HOM E or SHOP m odes

1. Ho me Mode i s an ener gy-savin g Mode. H ome Mode is recommended for normal viewing setting and is se t as defa ult dur ing man ufacturer.

2. Shop Mode is an option for retailers for Advertising or product presentation. Sho p Mode ha s a brigh ter ima ge than H ome Mod e.

3. You may s witch b etwee n Home or S hop Mod e as yo u choos e.If you cho ose Sho p Mode ,i t will en ter HDM I1 sour ce automat icall y,and yo u wil press Ex it key to ex it POP me nu.

EN-14

Note: The default password is 6666.

1. 1)Auto Tuning (DVB-T)

1. CHANNEL MENU

CHANNEL

PICTURE

SOUND

TIME

OPTION

LOCK

Auto Tuning

ATV Manual Tuning Prog ramme E dit Signal Information

DTV Manual Tuning

Software Update(USB)

CI Information

Programme(s) Programme(s)

Programme(s)

MENU MOVE OK

1). Press the MENU button and then press the buttons to select the CHANNEL menu and then press the OK button.

2). Press the buttons to select Auto Tuning and then press the OK button.

3). Channel tuning will commence. This operation may take up to 6 minutes. The display will show the progress of the tuning and the number of channels found.

4). If you want to skip the ATV tuning, press the MENU button to interrupt the tuning half way. A pop-up screen will be displayed, press the button to select YES to confirm. You will then go straight to DTV tuning. You may repeat the above step if you also want to skip the DTV tuning. A n installation reminder will appear the next time you turn on the TV.

5). After tuning is complete, the channels are arranged in a preset order. If you wish to skip channels, modify the preset order or rename channels, select

Programme Edit under the

Channel menu.

6) Congratulations

Congratulations!!!

Completed Initial Quick Setup.

Enjoy your Haier TV

Press OK to Exit

3). Press the buttons to select DVB-T/ DVB-C Press select DVB-T and then press the OK button to confirm.

4). In the Tune Type menu, press the buttons to

select ATV / DTV / DTV + ATV. Press the button

and then press the buttons to select the

country where you will operate the TV. Press the

OK button to confirm

Operation

EN-15

5). Channel tuning will commence. This

operation may take up to 6 minutes. The display

will show the progress of the tuning and the

number of channels found.

6). If you want to sk ip the ATV tuning, press the

MENU button to interrupt the tuning half way. A

pop-up screen will be displayed, press the

button to select YES to confirm. You will then go

straight to DTV tuning. You may repeat the

above step if you also want to skip the DTV

tuning. An installation reminder will appear the

next time you turn on the TV.

7). After tuning is complete, the channels are

arranged in a preset order. If you wish to skip

channels, modify the preset order or rename

channels, select P

rogramme Edit under the

channel menu.

1.2 )Auto Tuning (DVB-C)

2). Press the buttons to select Auto Tuning and then press the OK button.

3). Press the buttons to select DVB-T/DVB-C Press select DVB-C and then press the OK button to confirm.

4). Press buttons to select Scan type/Symbol (Ks/S) press the OK button to confirm.

5). In the Tune Type menu, press the buttons to select ATV / DTV / DTV + ATV. Press the button and then press the buttons to select the country where you will operate the TV. Press the OK button to confirm.

Programme(s) Programme(s)

Programme(s)

CHANNEL

PICTURE

SOUND

TIME

OPTION

LOCK

Auto Tuning

ATV Manual Tuning Programme Edit

Signal Information

CADTV Manual Tuning

Software Update(USB)

CI Information

MENU MOVE OK

French

Italy

Greece

Nederlands

Poland

Germany

Hungary

Luxembourg

Norway

1). Press the MENU button and then press the buttons to select the CHANNEL menu and then press the OK button.

French

Italy

Greece

Nederlands

Poland

Germany

Hungary

Luxembourg

Norway

Operation

EN-16

6). Channel tuning will commence. This operation may take up to 6 minutes. The display will show the progress of the tuning and the number of channels found.

7). If you want to sk ip the ATV tuning, press the MENU button to interrupt the tuning half way. A pop-up screen will be displayed, press the button to select YES to confirm. You will then go straight to DTV tuning. You may repeat the above step if you also want to sk ip the DTV tuning. An installation reminder will appear the next time you turn on the TV.

8). After tuning is complete, the channels are arranged in a preset order. If you wish to skip channels, modify the preset order or rename channels, select P

rogramme

Edit under the channel menu.

2. 1 )DTV Manual Tuning (DVB-T)

All the channels including ATV, DTV and Radio can be tuning by one time,if the Tune Type is DTV+ATV .

All t he stored ch annel s will be d isapp ear after auto tuning .

After auto tuning , the channel will skip to the first DTV channel.

2). Press the buttons to select DT V Manual Tuning and then press the OK button.

4). Press the MENU button to return back to the main menu.

5). Press the EXIT button to exit the menu.

2. 2 )DTV Manual Tuning (DVB-C)

1). Press the MENU button and then press the buttons to select the CHANNEL menu and then press the OK button.

3). The DTV M anual Tuning screen will pop up. Press the buttons to select the desired UHF channel and then press the OK button to commence the search of that channel. When the signal has been tuned, the picture and signal strength will be displayed on the screen.

1). Press the MENU button a nd then press th e buttons to select the CHANNEL menu and then press the O K button.

2). Press the buttons to select CADTV Manual Tuning and then press the OK button.

3). The CADTV Manual Tuning screen will pop up. Press the buttons to s elect(Frequency /Symbol (ks/s/QAM Type QAM) press the OK button to commence the search of that channel. When the signal has bee n tuned, the picture and sign al strength will be displayed on the screen.

4). Press the MENU button to return back to t he main menu.

5). Press the EXIT button to exit the menu.

Programme(s) Programme(s)

Programme(s)

490000

NO SIGNAL

CHANNEL

PICTURE

SOUND

TIME

OPTION

LOCK

Auto Tuning

ATV Manual Tuning Programme Edit

Signal Information

CADTV Manual Tuning

Software Update(USB)

CI Information

MENU MOVE OK

CHANNEL

PICTURE

SOUND

TIME

OPTION

LOCK

Auto Tuning

ATV Man ual Tuni ng Programme Edit

Signal Information

DTV Manual Tuning

Software Update(USB)

CI Information

MENU MOVE OK

Operation

EN-17

5). CI information: (optional)

This menu can display the CI card' s information.

Ren ame:

Use t he Arrow But tons to s elect t he chan nel you wis h to move. Th en pres s the Yellow Button to sel ect Move functio n. Once a ctive u se the Ar row But tons to move a nd then p ress OK to con firm.

Only can rename ATV programs . Move the cursor to the program, press teletext green button to rename the program. Press to choose the character. Press to move the cursor . Press MENU button to exit edit , Press EXIT to exit the menu. Note: ATV programs name only can be 5 charac ter, DTV programs name can be 25 character.

Press teletext red button to storage to channels after manual tuning .

4). Prog ram edit:

You can Delete ,Rename ,Move, Skip , FAV any programs.

Delete

Press teletext red button , the program in cursor will delete.

Press to choose the program , press teletext blue button to skip this program, The will show on the right side of the program . Choose the skipped program, press blue button again , you can cancel the skip ,The will disappear .

ATV Manual Tuning

Storage To 1

Sys tem BG

Cur rent CH 1

Fine-Tune

Frequency 424.25 MHz

3) ATV Manual tuning :

You can change the sound system to search the analog TV channels and fine tune the channels , then storage the channels you selected.

Favourite:

Press to choose the program , press FAV button , it will show on the right side of the program.Choose the FAV program , press FAV button again , you can cancel the FAV, the will disappear .

Once your favorite group is created, you can press the FAV key to quickly access your favorite channel.

1).Tint is available in NTSC system only.

2).There are four colors temperature modes can be selected medium, warm, cool,user

3).Screen is available in PC mode only which can adjust Horizontal position, vertical position, size and phase.

3.SOUND MENU

The third item of the MENU is the SOUND MENU. You can adjust the sound effect here such as treble, bass, balance etc. Press to move, press OK to adjust.

Auto volume: only available when the input signal volume is too large or distortion.

Pic ture Mo de Stan dard

Con trast 5 0

Brightness 50

Color 50

Sharpness 75

Tint 5 0

Col or Tempera ture Me dium

Red 5 0

Green 50

Blu e 50

4.TIME MENU

The forth item of the menu is the TIME MENU You can adjust the clock, power on/off time, sleep time etc Press to move, press OK to adjust.

The second item of the MENU is PIC TURE MENU. You can adjust picture effect here, such as contrast, brightness, etc. Press OK to move, press OK to adjust.

2. PICTUREMENU

Sav e MENU

CHANNEL

PICTURE

SOUND

TIME

OPTION

LOCK

Sound Mode

Auto Vo lume Surround Sound

Balance

Standard

Music

Theater

Sports

User

CHANNEL

PICTURE

SOUND

TIME

OPTION

LOCK

Picture Mode

Aspect Ratio Noise Reduction

Screen

Color Temperature

Eco

Mild

User

Stsndard

MENU MOVE OK

Operation

Move:

Skip:

EN-18

5.OPTION MENU

The fifth item of the MENU is the OPTION MENU. You can adjust the Menu language, Audio language,Subtitle language etc.

Within 15 minutes there is no signal, the TV will auto sleep , if Auto Sleep is set ON. The clock time can get from the DTV system auto.

6.LOCK MENU

The sixth item of the menu is the LOCK MENU You can lock system, set password, block program and set parental guidance Once you set the lock system on you can not search the channels or change any programs.

The default pass word is 0000, If you forget the password, you can use the super password:9443. Block program: Press to choose the program ,press teletext green button to block the program. If you want unblock the program, pls enter the main menu , input the password, then press green button again.Parental guidance: Press to choose rating.

7.EPG Menu(Electronic Program Guide).

The EPG menu is used to look at what is being broadcasted on DTV or Radio channel in the day. To access the EPG menu, press the EPG botton,the following menu will be displayed:

1. Use to choose the programs , Press INFO key, you can display the highlight program's information.

INFO

2. Press the teletext yellow key, It can list all the reminder schedule, press to choose the list, press red key to delete the schedule list.

Schedule

DELETE

Sch edule L ist 04: 55 28th Ap r Delete

Time Date

Programme Title

Channel Name

Restore factory default will clear all the programs and password.

In PV R File syste m menu you can s et up USB dis k for PVR.

Automatic Power-down

1.I f after 4 hours from switch on and no changes have been made to the TV, for example no channel or volume changes,the T V will start the automatic power down sequence. And pop-up window will appear on screen.

After 150 seconds the TV will automatically switch to standby. To override the automatic shutdown press any button on the remote control.

2. To cancel the automatic power-down On the Option Menu select Automatic power-down(4H) Press OK . A pop-up me ssage will appear “Are yo u sure you wan t to enable au tomat ic powerdown?” Use t he righ t arrow key to s elect N O The T V screen ret urns to t he Opti on Menu a nd the Automatic power-down(4H) option will display. Automatic power-down(4H) OFF To return to auto shutdown after 4 hour s repeat the abo ve excep t use t he left a rrow ke y to sele ct YES.

XXX’s to automatic power- down Please press any Key to Cancel

CHANNEL

PICTURE

SOUND

TIME

OPTION

LOCK

Lock System

Block Program Parental Guidance

Set Password

MENU MOVE OK

CHANNEL

PICTURE

SOUND

TIME

OPTION

LOCK

OSD Language

Subtitle Language Country PVR Fi le Syst em

Restore Factory Default Automatic power-down(4h) Home/Shop Mode DCR

Audio Languages

MENU MOVE OK

CHANNEL

PICTURE

SOUND

TIME

OPTION

LOCK

Clock Off Time

Sleep Timer Auto Sleep Time Z one

On Time

MENU MOVE OK

26/Jan

11: 40

1 TV3

Club/Super3-Naturalmen..

No Information

PROGRAMME GUIDE

Schedule

Record

INFO

Remind

TIME

2 3/2 4

3 TVC HD

INDEX

USB Disk

Time S hift Si ze Speed

Sel ect Dis k C:

Che ck PVR Fi le Syst em Star t

Format

Fre e Recor d Limit 6 H r.

Operation

EN-19

CHANNEL

PICTURE

SOUND

TIME

OPTION

LOCK

OSD Language

Subtitle Language

Country

Restore Factory Default Automatic power-down(4h) Home/Shop Mode DCR

Audio Languages

MENU MOVE OK

3. Record Press the red key ,I t can set the program to be recorded.

4. Press the blue key to choose one program and set up one reminder time, the TV screen will skip to the choosed program in the reminder time automatically.

Remind

Check PVR File System: check if the PVR File System set up in the USB device or not.

Format:

Sel ect Dis k

USB 0

Dis k C:

PVR File System Type Hi Spe ed FS

PVR F ile Sys tem Siz e All

SD 10 4 Mins

HD 29 M ins

File System Size

Selec t Disk:select which disc to save the record file.

PVR File System Type FAT32

SD 10 4 Mins

HD 29 M ins

File System Size

1.Prepare to record the program

8.PVR function

PVR function only works in DTV. From OPTION MENU enter into PVR File System In “OPTION MENU”, please choose “check PVR File S ystem”. Click “OK”, unti l “checking”change i nto “Success”. Note: please check the term “speed”. I f it is “HD support”, that me ans the s peed of U SB device is available for time shift and record. If not, please format the device, to make sure the device available. The default “Free Re cord Limit” is 6 hou r, if the sp ace on th e disk is b ig eno ugh. If t he spac e is not big enough, the record time should be shorter, depends on the room on the device. During the “che ck PVR File Syste m” check ing, pl ease do not take any other operation until it finished.

The reco rding s must be d one wit h the TV PVR

sys tem. It c an only b e played in th e same TV,

not i n any other kind o f devic e (comp uter,

DVD, e tc.) wh ich is no t compatib le with .

TS. f ile format .

Please note that in order to carry out any kind of

record ing, the TV wi ll requ ire you to format t he

connected USB device to store the recording.

WARNING. WHEN YOU FORMAT, THE

EXT ERNAL U SB DEVICE YOU WI LL LOSE AL L

THE FILES AND INFORMATION YOU HAVE

STORAGE ON THE DEV ICE.

The U SB file s ystem will l imit th e size of t he

storage size.

File sys tem: NTFS up t o 2TB

FAT32 with up t o 192GB

FAT16 with up to 2GB

From OPTION MENU enter into PVR File

System a s below :

1 TV3

37 Mi nute

11 Hou r

Jan M onth

26 Da te

Onc e Mode

Reminder

BACK

PVR Fi le Syst em

USB D isk

Time S hift Si ze Speed

Sel ect Dis k C:

Che ck PVR Fi le Syst em Star t

Format

Fre e Recor d Limit 6 H r.

Operation

EN-20

below menu appear after Format finish:

2.Record the program

3.Play the record

(Suggest to format the device by “High Speed Fs...”, which can speed up the record.)

Format disk

If you select the “Hi Speed FS ”format mode, then you can change the time shift size:

Do no t unplu g USB dev ice.

Formatting,please wait

Format disk

As pl aying the DT V source, choo se the ch annel and c lick “record”, the rec ord frame wi ll pop up. Click “record” again , the record f rame will disappear and the “REC” icon stil l on the le ft top. It wi ll disa ppear u ntil yo u click “stop”.

The p rogram record ed on the “US B”wil l be saved in the folder “_MSTPVR” on the device.

1.Th e USB storag e size ca n be betw een 128 MB and 50 0GB in si ze, but fo r practic al use 2GB t o 500GB i s recommen ded.

2. Video may become pixelated when Video bit r ate is too low. Th is can be c aused by con necti ng a USB ex tensi on cabl e inste ad of plu gging t he USB di rectl y into the TV

3. No t all USB d evice s are compat ible. Bel ow is a lis t of recomme nded US B drive s. Models that are not listed may be compatible, but i t is not gu aranteed t o work. The U SB supp ort list are the sam e as Timeshif t function,see the following pages for details.

Sta rt Exit

Format disk

Warn ing! All d ata wil l be lost .

USB Disk

Time S hift Si ze

Sel ect Dis k C:

Check PVR File System SUCCESS

Format

Pass

All

Spe ed HD Support

2730KB/S

Fre e Recor d Limit 6 H r.

USB Disk

Time S hift Si ze

Sel ect Dis k C:

Check PVR File System Checking

Format

Pass

All

Speed

Checking

Fre e Recor d Limit 6 H r.

Time S hift Si ze

Time S hift Di sk Size 5 12 MB

SB 14 M ins

HD 4 Mi ns

Operation

EN-21

Prepare to record the program

9.Timeshift function

This T V allows you to pause and record the cur rentl y watched di gital p rogram to a US B storage device, and to resume to the point where it was paused.

Formatting a USB 2.0 stora ge device will be needed. Save your original data before formatting. All the data stored in the U SB devi ce will b e erased after formatting.

USB Drive Storage Format

Select to format the USB device and allocate the amount of space for the Time Shift function.

The format process will take at least 2 minutes. Please do not turn off the power or remove the USB device during formatting.

During formatting, a spe ed test w ill be do ne on the USB device. If it fails, it means the USB device may not support the Time Shift function.

Record a paused DTV program to USB storage device

Ple ase do no t unplu g the USB s torage dev ice whe n the Time Shift fu nction is a ctiva ted.

App roximately 4GB of m emory buf fers about offer 140 minutes.

1. Whi le in the DTV i nput so urce, inse rt USB storage device to the USB port on the sid e of your TV.

2. Press PAUSE to start Tim e Shift function. The TV program paused. The Time Shift OSD appears, and starts recording.

3. Press S TOP to sto p Time Shi ft function and stop recording program.

Pause FF Prev. NextFB Stop

Repeat ALL

00:04:22

Set A

play

00:04:22

Operation

EN-22

8. Thi s feature is n ot availab le for al l digital TV,such as scrambled or audio only channels.

Time Shift limitations:

1. Whe n the Time S hift featu re is activate d, only the PLAY/PAUSE/STOP/FWD/REV/ VOL+/VOL-/MUTE keys and some basic operation keys (ENTER/EXIT/navigation keys) are available.

2. Video playback may not be smooth and skip if USB r ecording s peed do es not me et the minimum requirements .

3. Do N ot remove US B disk or s witch o ff the power du ring Tim e Shift ope rations. I t will

abort once the signal is lost.

4. Do N ot remove th e signa l source dur ing Time Shift operations.

5. Do N ot quic kly and rep eatedly ch ange operations between PLAY/PAUSE/FWD/REV.

6. Vid eo may becom e pixelate d when Video bit rate is to o low.

7. No t all USB d evice s are compat ible, The USB hard disk drive electricty should be < 500 MA. Bel ow is a lis t of recomme nded US B drvies. Mod els tha t are not l isted may be c ompat ible, but it is not guaranteed to work.

San D isk Extreme® Contou r™ USB Flash Dri ve - 8GB SD CZ8 - 819 2 - E75

San D isk Extreme® Contou r™ USB Flash Dri ve - 16GB S DCZ8 - 01 6 G - A75

Kin gston D ata Traveler 4 10 USB 2. 0 Flash Dr ive - 16G B DT410/16 GB

Kin gston D ata Traveler 4 10 USB 2. 0 Flash Dr ive-8 GB DT410 /8 GB

OCZ Technology ATV USB 2.0 Flash Dri ve - 8GB OC ZUSBAT V - 8GB

OCZ Technology Rally 2 US B 2.0 Flash Dri ve - 4GB OCZUSBR2DC - 4 GB

OCZ Technology Rally 2 US B 2.0 Flash Dri ve - 8GB OCZUSBR2DC - 8 GB

SZMSUNG - Hm5 00 JI -50 0 G

Operation

EN-23

Press so urce key, and s elect USB i n source list, press OK button to enter the USB menu.

10.USB Player

Please make sure that the USB device have plugged in the slot.There are four type media item can be selected, such as photo, music, Movie, and text. Select the type media item by pressing , press OK but ton to enter the disk selection menu.

Press th e to select the right disk and press OK to display media files and folder list or cho ose Ret urn to ba ck to the m edia ty pe selection menu.

Select the media file by pressing or , then the preview frame will pop up.Press the button to pl ay the media f ile in fu ll scre en.Wh en the media file (photo, Movie, or text type) is playing, press the OK or Info butt on can di splay t he control bar.

Press to s elect t he func tion icon , press OK button to confirm the function. Press or E XIT but ton to exit th e control ba r except for musi c.

You can a djust t he audi o track , or prog ram in th e Inf o menu wh ile Playin g the vid eo file .Choo se the Inf o icon an d press OK can d ispla y the Inf o MENU.

USB playback is supported for the following photo file formats:

-JPEG( JPEG fo rmat, f iles wi th the ex tensi on ".jpg" )

-BM P (file s with th e exten sion ".bmp")

-PNG (files with the extension ".png") USB playback is supported for the following music file formats:

-MP 3 (file s with th e exten sion ".mp3")

-WAV (fi les wit h the exten sion ".wav ") USB playback is supported for the following text file formats:

-TXT (files with the extension ".txt")

USB p layba ck is sup porte d for the foll owing m ovie file formats:

-AVI (file with the extension".avi")

-TS (MPEG 2 & H.264)

Pause FF Prev. NextFB Stop

Repeat ALL

00:04:22

Set A

play

00:04:22

PHOTO MUSIC TEXT MOVIE

Haier Innovation Life

USB2.0 Back

Move Select

Return C

Haier Innovation Life

Back

Move Select

Picture

Back

Move Select

Return 720 480 1080Up Fol der 0021.JPG

0021.JPG

SUB-10.avi

Resolution: 720x 40 0

Subt it le :

Prog ra m:

Size: 4142 KBy te s

AudioTrack: 1 /1

OFF

--/0

Operation

EN-24

Picture Audio

Snow Noi se

antenna position, direction or co nnect ion

Inspection Check

Inter ference

Noise

electronic equipment,car/ motorcycle,fluorescent light

Normal Picture

Mut e

Volume( check i f mute is activ ated or if the a udio sy stem con necti ons are n ot correct)

No pi cture Mut e

Powe r cord is not in serted Powe r switc h is not op ened Contrast and brightness/volume setup Press st andby k ey on the remo te con trol for i nspec ting

No colour Normal audio Colour control

Picture breaking up

Normal audio or weak

retune channel

No colour

Noise

TVsystem

Normal audio

antenna position, direction or connection

Trouble phenomenon Symptom

Ghost

Normal audio

Change aspect to zoom

Ther e is blac k bar on top and bottom

Trouble Shooting

05 Trouble shooting

EN-25

Trouble Shooting

EN-26

My TV does not display the picture on my laptop / PC when connected.

Most PC's and laptops when connected with a VGA Plug (the blue 15 pin plug on your PC or laptop) require you to press some buttons on your key board to get a pic ture on a TV or other external display. This is usually the F7 (Dell) or F4 (HP / Samsung) or F5 (Toshiba). On laptops, you have to press the “Fn” key at the same time as the “F” key.

I have connected my PC/Laptop to the TV and get a picture but no sound. Why ?

The VGA cable only carries the video or picture information. You need to connect a separate cable connected to the earphone socket (3.5mm jack) on you PC/Laptop to the 3.5m (PC Audio IN) socket on your TV. You will need to select “PC” using the Source button on your remote. Alternatively connect your PC/Laptop using a HDMI cable if you PC/Laptop has a HDMI connector. HDMI is both audio and video.

The picture is not auto resizing when changing channels.

Check that the TV picture Aspect Ratio is set to 'Auto' on all inputs ATV, DTV, SCART, HDMI 1, 2 etc. To set the aspect ratio, (Auto, 4:3 or 16:9). Press Source button start at ATV and repeat the sequence below for all input sources ATV, DTV, SCART, HDMI 1 and 2 as each input source is controlled separately. Press TV Menu button Press Right Arrow to access Picture sub menu Press Down Arrow to select Aspect Ratio Select Auto Press Exit Repeat for all input sources.

I have just plugged in a DVD player or another item into my TV and it doesn't work.

This is applicable to any item of equipment plugged to the TV

1. Turn both TV & DVD player off (plugs out of the wall socket, not standby).

2. Turn off any equipment connected to the SCART socket.

3. Disconnect the SCART plug from the TV.

4. Plug in and turn TV on

5. Plug in and turn DVD player on

6. Select HDMI from Source Menu

7. Press play on DVD player and check movie plays ok NOTE: The SCART socket has priority over HDMI and it is important that the equipment connected to the SCART socket on the TV is switched OFF (not in standby). Please follow this information. If the advice works and the DVD player wor ks, the TV is OK it is just a bit confused. Probably HDMI plugs have been removed and plugged back in when the TV is switched on. Never remove or plug in HDMI cables or any digital equipment with the equipment switched on. Always switch off all equipment when unplugging or connecting any digital equipment.

Trouble Shooting

EN-27

Pic ture Br eaks in to Pixel s

A typical example of a rec eptio n probl em incl udes th e break up o f pict ures (pixi latio n) or the picture freezing, sometimes there are cli cking o r squea king sounds or the sound drops out or ther e is NO reception at all. Your pi cture m ay brea k into pi xels due t o the dig ital vi deo sig nal dropping. The signal dropping may occur because of either problems with weak sign als (se e TV Aeri als) or i f you are connected by cable a weak c able si gnal. If the p roble m is weak signals, use an amplifier to strengthen the signal. A cabl e techn ician c an help you in stall a n inlin e ampli fier or a pre-amplifier. This will boost your signal strength and fix the pixe l probl em.

If you are receiving your TV signal by satellite, check your dish has no t moved fo llowi ng high w inds, or tha t the sig nal is blocked by trees. Trees can be a prob lem as th e TV s ignal c an chan ge depending if a tre e betwe en the sa tellite di sh and satellite is in bare or in full leaf.

Missing channels

It ma y be that y ou find t hat the re are channels missing, or you're receiving channels from the wrong region. Sometimes the inter activ e servi ces (re d button ) does n't work . Thi s is usua lly cau sed by we ak sign al, see TV Aer ials

TV Aerials

Digital terrestrial television (Freeview) comes to your TV via an aerial, The old aerial that was good for analogue TV may not w ork wel l for digi tal so ma y need up gradi ng. If you a re gett ing som e but not a ll of the d igita l chann els on DT V (Freeview) for example you get BBC1, BBC2, Channel 4 ,bu t not IT V or Chan nel 5, th is is usu ally be cause your a erial i s a nar row ban d type, a nd need s to be change d to a wide b and typ e.

Faulty Leads and Cables

Che ck your T V. Are t he lead s at the ba ck - to the m ains, t he aeri al, the set- top box, t he vide o or DVD pl ayer or r ecorde r properly connected? SCART leads are known to work loose over time an d can res ult in bo th audi o and vid eo (pic ture) problems. Either left or right or both audio is missing and the colours are poor or muddy looking. Push the SCART plugs firmly in, this should fix the problem. HDMI plugs need to be pushed in firmly; it's only the last millime tre tha t the con tacts m ake. Typi cally t he blac k plast ic part of the HDMI plug should be very close or touching the body of the TV or component. When plugging in any HDMI cables you may experience problems if the HD MI cabl es are pl ugged i n when th e TV o r the other component is switched on. Always switch off both the T V and the co mpone nt you ar e plugg ing in. I f you have checked the plugs and sockets, switch off the TV and whatever you have plugged in to the TV and then switch them on again.

I have connected my PC to the TV. There is no sound.

If you connect your PC or Laptop to the TV using a VGA ( 15 pin Su b D) cabl e there i s no audi o, you nee d to conn ect a separate audio cable to the TV from the PC or laptop.

Unnatural Colours and Flesh Tones

Unnatural flesh tones and other colours could present another pr oblem e ven in a ne w HDTV. Thi s is due to t he TV picture settings, which are optimized for a showr oom enviro nment. Fix th is by cha nging t he pict ure mod e to natu ral in the picture menu. For more precision, try manually setting the colour, contrast and brightness options in the picture menu.

White Outlines

White outlines around objects and people generally appear either if the TV sharpness is set to very high, or if your television set uses some edge-enhancement processing technology. Go to the picture menu and adjust the sharpness till the white outline disappears. If edge-enhancement is enabled, try to disable it using the service menu.

Choppy Video

At times the video might become choppy. When this happens, check whether the signal is strong enough. If the signal is strong the problem is with the cable operator. If the signal strength is weak, try boosting the signal strength with the help of an amplifier.

The p ictur e does no t fill th e scree n

When connecting PC's or laptops to the TV, the picture may not fill the screen. Check the display settings on your PC or laptop (Windows > Star t > Contro l Panel > Appearance and Personalization > Displ ay

settings) and select the best

resolution. On your TV select:- TV Menu > Pict ure > Settings and then try AUTO, ZOOM1 or ZOOM2 for the best display.

USB Connection

The USB connection will work with *.jpg (photo) and *.mp3 (music) file s. Please no te the TV d oes not reco gnize Ap ple iPhone, or iPod's connected to the USB connector on the TV. The TV ma y play ot her fil es, but d ue to the m ultip le different file formats, there is no guarantee that these other fil e forma ts will w ork.

Trouble Shooting Digital TV Problems and possible Solutions.

EN-28

Specification

Television picture quality:

FUL L HD

Integrated digital. Screen Size: cm127

Res oluti on 1920 x 1 080 pixels 50H z.

50" Full HD 1080P Digital LED LCD TV

Additional features:

NIC AM stereo so und sys tem.

2 x 8 wat ts RMS power o utput .

Digitally interactive. Dig ital text. Digital video broadcasting (DVB) subtitles available. Auto setup. Auto sca n for new c hanne ls. Now a nd next p rogramme g uide. 7 day electronic programme guide (EPG). Top up TV compat ible. CI sl ot. Audio description compatible.

Sound quality:

Digital features:

Standby Power consumption

<0.5W

* The part specifications of this TV set provided here

are for reference only. Difierences may occur as product technology is updated. Design and specifications are subject to change without notice.

Scart Output description :

1. When current source is AT V/AV/SCART, scart output signal is ATV .

2. When current source is DTV, scart output signal is DTV.

3. Other source have no scart output signal.

UHF/VHF tuner. Sleep timer. Child lock. Pic ture and tex t. Rem ote contro l batte ries requi red 2 x AAA ( inclu ded). VES A Mount S ize: 20 0 x 200 mm Package Si ze (Wx HxD): 1 290x8 27 mmx175

Package weight : 18.5kg

Set weight without stand: kg 13

Set w eight w ith sta nd: kg15

Connectivity:

2 HDMI sockets. 1 SCA RT socket . PC input socket. Component video socket.

Composite. 1 USB p ort.

Trouble Shooting

Set Size (WxHxD) with Stand: 1148x737x280mm Set Size (WxHxD) without Stand: 1148x690x78mm

+ 163 hidden pages