Haier HHX3030W, HHX3030SS, HHX3030BQ, HHX3030BK, HHX3030 Owner’s Manual

User Manual Model

HHX3030

Guide de l’Utilisateur

HHX3030

Manual del Usuario Modelo

HHX3030

Range Hood

Extractor de Aire

Hotte de Cuisiniere

English

1

SAFETY PRECAUTIONS

Warning! – To reduce the risk of fire, electric shock, or injury to persons, always
exercise basic safety precautions, including the following:

1. Read all instructions before using the appliance.

2. Use this appliance only for its intended purpose as described in this user
manual.

3. Do not use any accessories not recommended by the manufacturer.

4. This unit must be grounded.

5. Do not use this appliance for commercial uses.

6. Installation work and electrical wiring must be done by qualified technicians in
accordance with all applicable codes and standards, including fire-rated
construction.

7. Sufficient air is needed for proper exhausting of gases of fuel-burning
equipment through the flue (chimney) to prevent back drafting. Follow the
heating equipment manufacturer’s guidelines and safety standards such as those
published by the National Fire Protection Association (NFPA), and the American
Society for Heating, Refrigeration and Air Conditioning Engineers (ASHRAE),
and local code authorities.

8. When replacing an existing range hood with your new Haier Range Hood, turn
OFF the electrical power to the existing unit before removal.

9. Before servicing or cleaning the unit, turn the power OFF at the service panel
and if possible, lock the service panel to prevent power from being switched on
accidentally. When the service panel cannot be locked, securely fasten a
prominent warning device, such as a tag, to the service panel.

10. Do not repair or replace any part of the appliance or attempt any servicing.
Note: If for any reason this product requires service, we strongly recommend
that a certified technician perform the service.

11. When cutting or drilling into wall or ceiling, be careful not to damage existing
electrical wiring and other hidden utilities.

12. Ducted fans must always be vented to the outdoors.

To reduce the risk of range top grease fires:

1. Always turn the hood ON when cooking at high heat or when cooking flaming
foods.

2. Never leave cooking unattended at high settings. Boilovers cause smoking and
greasy spillovers that may ignite. Heat oils slowly on low or medium settings.

3. Use proper-sized pans that correspond to the size of the stove, and the amount
of food being cooked.

4. Clean ventilation fans frequently. Do not allow grease to accumulate on the fan
or the filter.

English

2

Thank you for using our Haier product.
This easy-to-use manual will guide you
in getting the best performance from
your Haier Range Hood.

Remember to record the model and
serial number. They are on a label in the
refrigerator.

Model number

Serial number

Date of purchase

Staple your receipt to your manual.

You will need it to obtain warranty service.

To reduce the risk of personal injury in the event of a range top grease fire:

1. NEVER pick up a flaming pan, as you may be injured.

2. DO NOT use water, including wet dishcloths or towels, to put out a fire. A
violent steam explosion may result.

3. Smother flames with a close-fitting lid, metal tray, or cookie sheet. Then turn
OFF the burner. BE CAREFUL TO AVOID BURNS! If the flames are not put out
immediately, evacuate and call the fire department.

4. Use an extinguisher only if:

a) You know that you have a Class ABC extinguisher and you already know

how to use it.

b) The fire is small and contained in the area where it started.

c) The fire department is being called.

d) You can fight the fire with your back to an exit.

CAUTION!

Important – Observe all governing codes and ordinances.

1. For general ventilation use only. Do not use this appliance to exhaust
hazardous or explosive materials and vapors.

2. To reduce the risk of fire, use only metal ductwork.

3. To avoid damage to motor or other components, keep drywall spray,
construction dust, etc. off the power unit.

4. Please read specification label on product for further information and
requirements.

SAVE THESE INSTRUCTIONS for Future Use

English

3

Accessories

Range Hood Accessories Provided:

1 Range Hood

1 Damper Flap

4 Damper Screws

4 Range Hood Screws

4 Washers

2 Wire Connectors

2 Aluminum Filter with Charcoal Inserts

2 Aluminum Filter

1 User Manual

Check to make sure that all parts and accessories are present and in good
condition. If you find that they are not in good condition or are missing, please
contact our customer service department for assistance. Our Toll-Free number

is 1-877-337-3639.

Table Of Contents

PAGE

Safety Precautions ............................................................................................1

Accessories ......................................................................................................4

Installation Preparation......................................................................................5

Cabinet Preparation..........................................................................................6

Selecting Venting Direction ................................................................................7

Cabinet Preparation for Hoods Support..............................................................8

Preparing Electrical Connections ........................................................................8

Preparing Duct Connections ..............................................................................9

Wiring Diagrams............................................................................................10

Installing Ductwork..........................................................................................10

Hood Installation ............................................................................................11

Use and Care ................................................................................................12

Troubleshooting ..............................................................................................13

Warranty Information......................................................................................14

English

4

Installation Preparation

To install this range hood, you will need the following tools and materials:

Note: This procedure will require 2 people for easier installation.

Tools Needed for Installation

• Drill

• 1/8” Drill bit for drilling pilot holes

• 1-1/4” Wood bit for drilling electrical wiring access hole

• Phillips head screwdriver

• Flat-head screwdriver

• Pliers

• Pencil, rule and level for marking range hood location

• Hand saw or jig saw for cutting the wall or cabinet openings

• Duct tape

• Electrical tape

• Connector Clamp

General Preparation

Caution! Please be sure to turn the electrical power switch OFF before beginning

the installation.

1. Remove the range hood from the carton.

2. Lay the range hood upside down on a table covered with either cardboard or

paper to prevent scratching the hood or table.

3. Unscrew the 2 lamp covers with a Phillips head screwdriver.

4. Remove the lamp covers.

5. Install two 40 Watt light bulbs.

6. Replace the lamp covers and the screws.

7. Remove the 2 grease filters from the hood. Place them somewhere safe so they

will not be damaged.

8. Remove the range hood’s bottom cover by removing the 4 screws holding it in

place. Put the cover somewhere safe so that it will not be damaged and save the
screws.