the end connecting to the water inlet hose jointer
Meaning and description of the symbols
Contents marked with that symbol are related to the safety of the product and the personal
safety of the users. Please operate in strict conformity to the contents, otherwise it may
result in damage of the machine or influence the personal safety of the users.
Contents marked with that symbol are actions forbidden to perform. Performing of those
actions may result in damage of the machine or influence the personal safety of the users.
jointer connecting the water
inlet hose and the water faucet
Water inlet hose
(one piece)
Water inlet hose joint
(one piece)
Safety precautions
Before Using
Before Using
Please plug the power plug on special
receptacle. Be sure to use three-pins
power receptacle. Ensure that the earthing
prong of the power receptacle is earthed
reliably. Use leakage protector if possible.
Earth
Do not bend, stretch, twist, bind the power cord by force,
or reform it. Do not press or clamp it with heavy items. If the
power cord and power plug are bad, or the receptacle is loose,
be sure to have it replaced by the technicians of our special shop
or our agent, or the after-sales service department for the sake
of avoiding any risk. Keep the prong of the power plug clean.
If dust is found on the power plug, please wipe it off with dry cloth.
Do not put the machine at damp place like
the bathroom. Never wash it with water.
In normal usage of the washing machine,
the power plug shall be ready to be pulled
or plugged with hand. Be sure to pull the
plug off and close the water faucet in
following cases: power failure, delivering
the machine, setting the machine idle or
cleaning the machine. Do not plug
or pull the power plug with wet hand.
Do not use water hotter than 50 C .
In case the washing machine is installed on ground with
carpet, do not block the ventilation hole with carpet.
The ventilation
holes at the bottom
Soft object
Do not let the machine share one receptacle with other electric appliances. If the power plug is damaged, or the
plugging into the receptacle is loose, do not use the plug any more.
Do not wash water-proof laundries like the raincoat,
bike covers etc. to avoid abnormal vibrations in spinning.
Safety precautions
Before Using
Before Using
Do not stretch hands into the working machine.
It is dangerous even if the rotation is slow.
Take special care of the children.
Do not put any hot or heavy items (such as the kettle
with hot water) on the washing machine
Do not decompose, repair or alter the machine
by yourself.
Do not wash laundries with volatile materials
(such as thinner, petrol etc.).
Benzene
The handicapped or children without care shall not
use the machine.
The lint filter shall be kept in good condition, and
installed to proper position. If the lint filter is lost
or damaged, please contact the local after-sales
service department of our company.
Keep the machine away from direct sunlight and
heat source like the heater.
Before Using
Installation and adjustment
Before Using
Please install and adjust the machine according to the requirement of the manual.
It is very important to your security and correct operating the machine.
Install the lint filter
After opening the package, please take out the
lint filter from the document bag and install it
into the Filter frame of the inner tub. See to the right Figure.
Filter frame
Adjust the Installation position
Lint filter
The largest allowed slope of the shank base of the machine is 2. The slanting or rough ground will result in
unstable running or stoppage of the machine. Please adjust it with following methods:
Confirm it's horizontal
Hang the plumb to confirm it's horizontal
Confirm it's horizontal:
If the bulb of the level meter at the balance display
position is inside the standard circle, it indicates that
the machine is horizontal. Otherwise you need to
adjust the adjustable leg of the machine.
Adjust the adjustable foot
(1) To twist the adjustable foot at the right front of
the cabinet (front the sight of front), please first
lift up the side of the foot slightly, loosen the
adjustable nut, and twist the foot.
(2) Fasten the nut after adjustment.
SuitableNot suitable
Loosen
High
Air bubble
Standard circle
adjustable nut
Fasten
adjustable foot
Low
Before Using
Before Using
How to change the direction of the drain hose
1.Lean the machine down gently with the front
surface facing the ground.
Back
Front
Soft item
2.Pull out the drain hose from the groove at the left side.
Use groove at
this side after
direction changing
Usage of the drain hose
3.Extend the drain hose from the left side. Push the
drain hose into the groove with hands.
The drain hose shall drain smoothly
1.The height of the drain hose shall be
less than 10cm, or the drainage will not
be smooth, and cost such long time that
the machine may stop at mid way.
2.Do not ramp or press the drain hose.
3.If the drain hose is too long, cut it at mid
point. To make smooth drainage, cut the
front end of the hose slantingly.
4.If extra drain hose is needed, please
make separate purchase. The inner
diameter of the extra hose shall not
less than 30mm, and the length shall
not exceed 1.5m.
5.If the extra hose is too long, cut it
either at A or at B point.
Loading...
+ 14 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.