Page 1
Table of Contents
Characteristic Functions 1
Important Safety Instructions 2
Technical Specifications 5
The Technical Specifications for Final Product 5
Technical Specifications for TV 6
VGA Display Mode 6
Power Management 6
Packing Listing 6
Installation & Connection 7
Antenna Connection 7
Power Connection 8
Computer Connection 8
AV1 Video Signal Connection 9
AV2 Video Signal Connection 10
YPbPr/YCbCr Input Connection 11
Position of Control Keys 12
Remote Control 13
Basic Operation Instruction 15
Power On 15
Standby 15
Signal Source Selection 15
Menu Operation Instruction 15
PICTURE 16
SOUND 17
OSD 18
ADVANCE 18
TV 19
Simple Troubleshooting 22
HDMI digital port Connection 8
Page 2
Characteristic Functions
1. LCD panel with no glint and low radiation can ease eyes' fatigue and protect
eyes.
2. High-quality LCD panel is adopted with high brightness, high contrast, wide
viewing angle, and super fast response time. Super fast response time can
greatly eliminate the shadow of moving images.
3. TV/Monitor with two in one and multiple input ports can easily switch among the
Modes.
4. De-interlacing image disposal is adopted. Today's most advanced technique for
movement compensation, can completely improve the saw tooth and vague
edges of the athletic picture.
5. There are four smart sound modes and four smart image modes.
6. Dynamic contrast technology can obviously improve the definition and contrast
of the picture
7. Tuner for frequency synthesis can support full auto search and manual search.
8. With perfect timing function, you can set time to turn off. It will be turned off in
state of no signals, too.
9. Auto Adjustment can help you to setup the image into the best performance in a
few seconds instead of complicated adjustment in PC mode.
10. Auto color balance adjustment technology can make the machine to reach the
best color setting in PC mode.
11. Support hi-definitionYPbPr and double HDMI.
12. All functions can be realized with remote control, which is really a convenient
operation.
13. Power is designed to save energy. The standby power consumption is less
than1.5W.
14. Input ports include VGA, YPbPr, HDMI, S-Video, CVBS, USB and TV.
15. Output ports include AV and Earphone.
16. Support USB interface, you can look through picture of JPG format and play
music files of Mp3 format.
1
Page 3
Important Safety Instructions
2
Thank you to choose the LCD TV made by our company, a valuable product with
excellent quality and multiple functions. This machine will bring you more
audiovisual enjoyment. Its design can insure user s safety. All machine are strictly
tested before leaving factory. But incorrect use can lead to electric shock or fire. In
order to insure safety and extend its life, please read below regulations carefully
before using it and comply with the following safety instructions.
When the following troubles occur, please pull out the plug and call the
professional engineers to repair.
A. The cable or plug is damaged.
B. The product was fallen down or the case is
damaged.
C. Obvious abnormal situation occurs. In spite
of correct operation according to the user
manual but it still can't work normally.
D. Some abnormal substances or liquid fall into it.
E. Unusual sound or smell sends out.
There is high voltage inside the machine but no parts which can be repaired by
users themselves. In order to assure the people's safety, please do not open
the case to repair it by yourself. If it is needed to repair, please contact qualified
engineer to repair.
Please put this machine in the place of well
ventilation, instead of extremely hot, cool or
moist, and direct sunlight.
The slots on the case is designed to release
heat so as to assure that all inside components
will not reach an extra high temperature and
can work normally for a long time. Please do
not cover the holes while place it.
Unless there is good ventilation installation,
please do not put this machine in inlaid device.
Please do not place it on an unstable position
so as to avoid falling off.
Do not place the LCD TV near water source,
like a bathtub, pool, washing machine, or moist
Page 4
Important Safety Instructions
3
cellar and similar environment.
During a thunder rain weather, do not touch
the power cord and antenna cable. Please
pull out the power line and aerial plugs for
preventing thunder and lightning damage to
this machine.
All cables can be connected or pull out only after power supply is turned off.
The power cord must be taken off before you
clean the machine. Do not use the liquid
cleanser or aerosol cleanser. It is
recommended to use a wet soft cloth to clean
the machine. Do not use the alcohol,
impregnant or ammoniac liquid to wipe the
screen.
If you will not use the machine for a long time, please pull out the power cord.
Do not keep the sleeping mode for too long time.
Read the manual and marking label before using the machine, and keep the
user manual for later use.
Don't use the attachments which are not recommended by the machine
manufacturer as they may cause hazards.
The power cord must be placed correctly so as to avoid be trample or crush.
Please do not make the power socket overloaded or the power cord extended.
Otherwise it will cause fire or electrical shock.
The LCD panel is fragile and expensive. The surface of the panel is easy to be
scratched. Please do not use the hard thing to knock, press, score the panel.
Otherwise it will be harmful for the panel. The exchange cost is very high.
All technical specification on this instruction book and outer package are
subject to change without notice. If the instruction book has slight difference
with actual operation, please take the actual operation as standard.
Page 5
4
Important Safety Instructions
When the MAINS plug or an appliance coupler is used as the disconnect device,
the disconnect device shall remain readily operable.
The machine should not suffer from waterdrop
or watersplash, do not place the vessel with
water (or other liquids) on it, for like this it is
possibly to cause fire or electric shock.
The attaching plug should be inserted into the
power point completely, otherwise it may cause
spark to bring fire.
Please do not put candle, ash-tray, incense, inflammables or explosive nearby
this machine.
Please do not stretch into any sharp object, metal or liquid, or touch the signal
attachment or the inner of radiation hole, in order to avoid short circuit and
product damage, or possibly causing electric shock. Especially pay attention
when there are children on the spot.
Please do not use the machine immediately when moving the machine from low
temperature place to high temperature one, or install and use at the place of
facing air conditioning, otherwise it may cause the condensation in the
machine, to cause fault.
Must be careful when moving this machine, avoiding being struck, especially
pay attention to protect the screen part. In addition, if using handcart, must
note the injury as the product is overturned from the handcart because of hard
braking, overexerting and uneven ground.
Page 6
Technical Specifications
The Technical Specifications for Final Product
5
37" (HD)
1366 768
1360 768@60Hz
0.600mm 0.600mm
819.6mm 460.8mm
16.7M
100V-240VAC 60/50Hz
10W+10W
8m 30
Temperature: 5 40 Humidity: 10% 85%
Atmosphere Pressure: 86kPa 104kPa
Temperature: -20 55 Humidity: 5% 95%
Atmosphere Pressure: 86kPa 104kPa
Excluding base: 908 598 112 mm
Including base: 908 646 112mm
Packing: 1030 735 230mm
Net Weight: 13.5Kg Gross Weight: 17.5Kg
42" (HD)
1366 768
1360 768@60Hz
0.681mm 0.681mm
930.25mm 523.01mm
16.7M
100V-240VAC 60/50Hz
10W+10W
8m 30
Temperature: 5 40 Humidity: 10% 85%
Atmosphere Pressure: 86kPa 104kPa
Temperature: -20 55 Humidity: 5% 95%
Atmosphere Pressure: 86kPa 104kPa
Excluding base: 1006 657 115 mm
Including base: 1006 711 115 mm
Packing 1135 795 230 mm
Net Weight: 19.5Kg Gross Weight: 23.5Kg
42" (FHD)
1920 1080
1920 1080@60Hz
0.4845mm 0.4845mm
930.24mm 523.26mm
37" (FHD)
1920 1080
1920 1080@60Hz
0.42675mm 0.42675mm
819.36mm 460.89mm
Panel size
Max. Resolution
Best Resolution
Pixel Pitch
Active Area
Color
Power Supply
Power Consumption of Speaker
Control Area of Remote Control
Operating Environment
Storage Environment:
Dimension (L H W)
Weight
Panel size
Max. Resolution
Best Resolution
Pixel Pitch
Active Area
Color
Power Supply
Power Consumption of Speaker
Control Area of Remote Control
Operating Environment
Storage Environment:
Dimension (L H W)
Weight
Page 7
Technical Specifications
6
Technical Specifications for TV
1.Supported Systems PAL+SECAM or PAL+NTSC
2.Storage channels: 199
3.TV(RF): 75 Imbalance
4.AV Video-Input: 75 ,1VP-P, RCA
5.AV Audio-Input: 20K , 500mV RMS
6.YPbPr/HDMI Video Input: 480i, 480p, 576i, 576p, 720p, 1080i, 1080p
VGA Display Mode
Power Management
This product is complied with EPA Energy Star Standard and compatible with VESA
DPMS Standard.
Note: All the specifications in the user manual or on the packing carton may be
changed without additional notice.
Packing Listing
1. LCD TV
2. User Manual
3. Power Cable (or the machine itself has power cable)
4. Remote Control
Details are listed as follows:
(Excluding base subassembly)
Note: Recommended mode: HD panel: 1360X768@60Hz
FHD panel: 1920X1080@60Hz
VGA
SVGA
70Hz
60Hz
60Hz
60Hz
60Hz
60Hz
60Hz
60Hz
720 400
640 480
800 600
1024 768
1280 720
1360 768
1600 900
1920 1080
WXGA
XGA
1
2
3
4
5
6
7
8
NO.
WUXGA
FHD/HD panel
Mode Resolution
Refresh
Panel
FHD panel
Mode
On
Standby
LED Indicator
Off
Lighting
Power Consumption
42"
240W
1.5W
37"
180W
1.5W
Page 8
Antenna Connection
It is better to use outdoor antenna or CATV cable if you want to watch the colorful and
hi-definition pictures.
Attention:
Please turn off TV power before the outdoor antenna is connected to the TV signal
input port. Outdoor antenna can't be located near the high voltage cables. Please pull
out the plug of outdoor antenna to avoid thunder shock in thunder weather.
Installation & Connection
7
Page 9
Power Connection
Notes:
1.This machine uses AC 100-240V, 60/50Hz.
2.If a long time at leisure, please disconnect
it from power supply.
Computer Connection
Please connect one end of VGA cord with the output port of the computer (available
for both desktop or laptop computer),
and another end of VGA cord with the
input port of the VGA on its rear cover.
HDMI digital port Connection
Connect external HDMI high signal
source to HDMI digital input port of this
machine through HDMI digital connector
cable; push"SOURCE" button to select
"HDMI" signal source.
8
Installation & Connection
Audio/Video machine with HDMI interfaces
Page 10
AV1 Video Signal Connection
Through composite cable, connect AV equipment VIDEO output termination to this
machine VIDEO input, and AV equipment AUDIO output termination to this machine
AUDIO input, respectively.
9
Installation & Connection
WW
RR
Y Y
WW
RR
Y Yellow (VIDEO)
W White (AUDIO-L)
R Red (AUDIO-R)
CVBS, DVD Player or other machine
with CVBS/S-Video.
Page 11
AV2 Video Signal Connection
For easy connection to AV Video Signal, there are a group of AV Video Signal input
ports on the down part on the left side of the machine. The connection method is the
same as AV1.
10
Installation & Connection
Earphone Socket: The TV speakers will be shut off when earphone is inserted
into this socket.
Y Yellow (VIDEO)
W White (AUDIO-L)
R Red (AUDIO-R)
WW
RR
YY
CVBS, DVD Player or other machine
with CVBS/S-Video.
S-VIDEO2
Page 12
YPbPr/YCbCr Input Connection
If the signal source is DVD, Digital wired receiver or equipments with the
YPbPr/YCbCr output, recommends you to connect YPbPr or YCbCr output with the
TV YPbPr/YCbCr input. In order to obtains the better picture quality, at the same
time, please connect its audio output with TV audio input as shown in the following
chart. If you choose the YPbPr/YCbCr signal, please set signal source selection
under YPbPr pattern.
Installation & Connection
11
AV machine
G B R
W
R
W
R
YY
G Green (Y)
B Blue (Pb/Cb)
W White(AUDIO-L )
R Red (AUDIO-R, Pr/Cr)
Y Yellow (VIDEO)
CVBS, DVD Player or
other machine with
YPbPr/YCbCr.
Page 13
Front Panel Control Keys
1) Power Indicator
2) Remote Receiving Sensor
3) SOURCE: Press this key to enter the menu of signal source and choose signal
source.
4) MENU: Press this key to enter main menu
5) CH+/CH-: Press these two keys to select the channel, and adjust the options
you need under OSD operation.
6) VOL+/VOL-: Press these two keys to add or reduce volume, and adjust the
analog value under OSD operation.
7) Power On/Off
Note: There are some apparent differences between modes, please according to
practicality.
Position of Control Keys
12
3
5
6
4
7
SOURCE
CH+
MENU
CH-
VOL+
VOL-
1 2
Page 14
Remote Control
13
Power
Numerical key
Smart sound
Menu
Cursor Key
Volume
Info
Time
Color
Color system
Return
Zoom
Channel
OK
Source
Smart image
Freeze picture
Program list
Mute
POWER
MUTE
SMART S
SMART P
INFO
COLOR
P/N
AUDIO
16:9
F1
VOL CH
MENU
SOURCE
OK
Telecontrol battery installation method
Take off the cover of battery box, fix two AAA batteries with 1.5 volt, and conform
with the polarity of remote control battery box.
Note: Appearance of the remote control may be different from this picture, please
according to practicality.
Page 15
Remote Control
14
Remote Control Key Instruction
Precautions for use of remote control:
1. When using remote control you should point it to the remote-control inductive
window. The goods between remote control and inductive window may hinder
normal operation.
2. Do not cause the remote control to receive fierce vibration. In addition, do not
set or place the remote control under direct sunlight, for the thermal energy will
cause the distortion of remote control.
3. When remote-control inductive window of main machine is under direct sunlight
or intense illumination, the remote control may malfunction, by now, please
change the angle of illumination or this machine, or approach the inductive
window to operate the remote control.
4. When the battery voltage is insufficiency it influences the remote control
distance, you should replace with new battery; when not to use the remote
control for long or the battery is exhausted, please take out the battery, in order
to avoid bringing the battery leakage to corrode the remote control and thus
cause it out of commission.
5. Do not use different batteries. The mix use of new and old batteries is not
allowed, you should use battery pair.
6. Do not throw battery into fire, charge or disassembly, especially do not charge,
assemble and disassemble, heat or burn to the used battery. Please observe the
related environmental protection stipulation on wasted battery.
Key
POWER
MUTE
Numerical key
F1
Program list
MENU
SMART S
SMART P
SOURCE
Cursor key
VOL+/VOLCH+/CHINFO
Time
Return
16:9
Color
P/N
AUDIO
OK
Function
Turn on or standby
Eliminate sound
Number input button
Freeze picture
Look through or edit Program list
Press this button to display menu
Intelligent sound mode selection:
Intelligent image mode selection: STANDARD, DYNAMIC,
Press this button to display signal source selection menu
Up or Down cursor button: function select
Left or right cursor button: analog add or reduce
Sound volume add or reduce button
Select channel Number
System information display switch
Timer setting button, press this key can set time of turning down.
Press this button to return to last watching channel
Color temperature mode selection button: Normal, Warm, Cool
Color system mode selection button: PAL, NTSC(SECAM), Auto
Optional
Confirm operation
STANDARD, NEWS, MUSIC, PERSONAL
SOFT, PERSONAL
"FULL", "MOVIE", "CAPTION", "4:3", "PANORAMA"
OFF
15
30
45
60 120
Page 16
Basic Operation Instruction
15
Power On
Plug power cord into the electrical socket and press '' '' key on the front panel, then
press ''Power'' key on the remote control to turn on the TV.
Standby
Press ''Power''key on the remote control. TV will be in standby.
Special Attention:
1.TV will automatically turn to standby if there is no signal input for 5 minutes
when TV turns on.
2.T rn to standby when the
Signal Source Selection
Press ''SOURCE'' key either on the remote control or on the
front panel. ''MENU OF SIGNAL SOURCE'' will be displayed
on the screen. Then press ''Up/Down'' key on remote control
or "CH+/CH-" key on the front panel to choose the signal
source such as
. Press ''OK'' key on the remote
control or ''MENU" key on the front panel and TV will switch
the current signal source to the signal source you choose.
set
V set will automatically tu preset time of turning off
reaches.
TV, AV1, AV2, S-VIDEO1, S-VIDEO2, YPBPR,
HDMI1, HDMI2, PC, USB
TV
AV 1
AV 2
S-VIDEO1
S-VIDEO2
YPBPR
HDMI1
HDMI2
PC
USB
50
50
50
50
50
CONTRAST
BRIGHTNESS
HUE
SATURATION
SHARPNESS
PICTURE MODE
SCALE
COLOR TONE
3D NR
STANDARD
FULL
NORMAL
MIDDLE
PICTURE
SEL ADJ
MENU
EXIT
Menu Operation Instruction
Press ''MENU'' key on the remote control or on the front panel. The TV will display the
main menu.
1. Press ''Left/Right'' key on the remote
control or ''VOL+/VOL-''key on the front
panel to select the adjustment sort menu,
which includes 5 sorts:
2. Press ''Down''key on the remote control
or ''CH-'' on the front panel to enter the
adjustment sort menu.
3. Press ''Up/Down'' key on the remote control
or ''CH+/CH-'' on the front panel to select what is needed to adjust in sort menu.
4. Press ''Left/Right'' key on the remote control or ''VOL+/ VOL-''on the front panel to
adjust the value or setting.
5. Press ''Menu'' key to exit the main menu when the TV displays the Main Menu;
Press ''Menu'' key to return to previous menu when the TV displays the submenu;
PICTURE, SOUND,
OSD, ADVANCE, TV.
Page 17
16
Basic Operation Instruction
There are three Color Temperature modes,
"NORMAL , , " "WARM" "COOL ".
Select color temperature mode
of the picture
COLOR TONE
3D NR
Select model of 3D NR
"MIDDLE", "STRONG", "WEAK", "OFF".
Press ''Source''key to display the signal source menu or exit signal source menu.
6. During the operation, the selections which can not be adjusted at current mode will
be hidden automatically and the color of the selections will be changed into gray.
7. Menu Operation Instruction in this manual is explained according to TV mode. The
operations in other modes are similar to the one in TV mode. Users can take it as
reference.
PICTURE
Select to enter the PICTURE submenu.
Press "Up/Down" key on the remote control or
"CH+/CH-" key on the front panel to choose
what you need. Press the "Left/Right" key on
the remote control or the "VOL+/VOL-" key
on the front panel to adjust analog value or
state (see below table).
Special Attention
1. The Hue function is available only for
NTSC system.
2. The value adjusted by user, such as Contrast, Brightness, Saturation, Hue, and
Sharpness will be saved automatically by the machine as personal mode.
Remote Control Shortcut Keys
SMART P: Press SMART P key on the remote control. You can switch the function
among the "STANDARD", "DYNAMIC", "SOFT", "PERSONAL" four modes .
16:9: Press 16:9 key on the remote control, you can switch the mode among the
"FULL", "MOVIE", "CAPTION", "4:3", "PANORAMA" five modes.
50
50
50
50
50
CONTRAST
BRIGHTNESS
HUE
SATURATION
SHARPNESS
PICTURE MODE
SCALE
COLOR TONE
3D NR
STANDARD
FULL
NORMAL
MIDDLE
PICTURE
SEL ADJ
MENU
EXIT
Description
Function
Option
"STANDARD", "DYNAMIC", "SOFT", "PERSONAL" four modes.
Select picture mode
PICTURE MODE
Increasing analog value increases brightness;
Decreasing analog value decreases brightness(0-100).
Adjust brightness and blackness
of whole picture
BRIGHTNESS
Increasing analog value increases Contrast;
Decreasing analog value decreases Contrast(0-100).
Adjust the contrast of whole
picture
CONTRAST
Increasing analog value increases color;
Decreasing analog value decreases color (0-100).
Adjust the saturation of whole
picture
SATURATION
Increasing analog value increases green;
Decreasing analog value increases purple(0-100).
Adjust the hue of whole picture
HUE
Increasing analog value increases definition;
Decreasing analog value decreases definition (0-100).
Adjust the sharpness of whole
picture
SHARPNESS
SCALE
Select picture scale
"FULL", "MOVIE", "CAPTION", "4:3", "PANORAMA",
Page 18
17
Basic Operation Instruction
50
50
50
BASS
TREBLE
BALANCE
SOUND MODE
STANDARD
SOUND
SEL ADJ
MENU
EXIT
SOUND
Select to enter the SOUND submenu.
Press " Up/Down " key on the remote
control or the key "CH+/CH-" on the front
panel to choose what you need. Press the
"Left / Right" key on the remote control or
the "VOL+/VOL-" key on the front panel to
adjust analog value or state (see below
table).
Special Attention
1. Normally, 50 value of adjustment is
recommended;
2. The treble or bass analog value which is adjusted by the users will be saved as
the personal mode by the machine
Remote Control Shortcut Keys
SMART S: Press SMART S key on the remote control. You can switch the function
among the PERSONAL
MUTE: Open or close sound.
VOL+/VOL-: Add or reduce volume.
, "STANDARD","NEWS", "MUSIC", " " four modes.
Option
Function Description
BALANCE Adjust balance of left or right sound
Increasing analog value increases treble;
Decreasing analog value decreases treble (0-100).
TREBLE
Adjust treble value
Increasing analog value increases bass;
Decreasing analog value decreases bass (0-100).
BASS
Adjust bass value
Increasing analog value decreasing left volume;
Decreasing analog value decreases right volume(0-100).
"STANDARD", "NEWS", "MUSIC", "PERSONAL" four modes.
Adjust audio effect mode
SOUND MODE
Page 19
18
Basic Operation Instruction
SLEEP - TIMER
DCC
BLUE SCREEN
RESETTING
ADVANCE
SEL ADJ
MENU
EXIT
OFF
OFF
ON
50
50
15
100
OSD - H POSITION
OSD - V POSITION
OSD - DURATION
OSD - HALFTONE
OSD - LANGUAGE
ENGLISH
OSD
SEL ADJ
MENU
EXIT
Option Function Description
Select to enter the ADVANCE submenu.
Press "Up/Down"key on the remote control
or "CH+/CH-"key on the front panel to choose
what you need. Press the "Left/Right" key on
the remote control or the"VOL+/VOL-" key on
the front panel to adjust analog value or state
(see below table).
SLEEP - TIMER
DCC
BLUE SCREEN
RESETTING
Set sleep time of the machine
Resume to setting of factory
Open or close DCC
Open or close BLUE SCREEN
"",
"ON/OFF", two states.
"ON/OFF", two states.
Off, 15M, 30M, 45M, 60M, 120M unit: minute.
Reset all values to setting of factory.
OSD
Select to enter the OSD submenu. Press
"Up/Down" key on the remote control or
"CH+/CH-" key on the front panel to choose
what you need. Press the "Left/Right" key on
the remote control or the "VOL+/VOL-" key
on the front panel to adjust analog value or
state (see below table).
ADVANCE
OSD-H POSITION
OSD-V POSITION
OSD-DURATION
OSD-HALFTONE
Option Function Description
OSD LANGUAGE
Choose OSD menu display language
Adjust H-position of OSD menu
Adjust V-position of OSD menu
Adjust duration of OSD menu
Adjust halftone of OSD menu
Increasing analog value, OSD menu move toward right;
Decreasing analog value, OSD menu move toward left (0-100).
There are many languages to select
Increasing analog value, OSD menu move toward down;
Decreasing analog value, OSD menu move toward up(0-100).
Increasing analog value, extend duration time of OSD menu (5-60).
Increasing analog value increases halftone;
Decreasing analog value decreases halftone(0-100).
Page 20
COLOR SYSTEM
SOUND SYSTEM
MTS
SKIP
AUTO SCAN
MANUAL SEARCH
FINE TUNING
CHANNEL EDIT
TV
SEL ADJ
MENU
EXIT
AUTO
M
MONO
OFF
19
Basic Operation Instruction
Select to enter the submenu. Press
"Up/Down" key on the remote control or
"CH+/CH-" key on the front panel to choose
what you need. Press the "Left/Right"key on
the remote control or the "VOL+/VOL-" key
on the front panel to adjust analog value or
state (see below table).
TV
TV
Option Function Description
Select color system
Select sound system
"I, D/K, M, AUTO, B/G" five modes.
""PAL, NTSC, AUTO three modes.
SOUND SYSTEM
COLOR SYSTEM
Select auto scan
Select manul search
Select channel edit
Select skip or notSKIP
FINE TUNING
CHANNEL EDIT
MANUAL SEARCH
AUTO SCAN
"ON/OFF" two states.
Please refer to "AUTO SCAN"
Select fine tuning
Please refer to ""MANUAL SEARCH
Please refer to ""CHANNEL EDIT
Please refer to ""FINE TUNING
AUTO SCAN
Select to enter the submenu of . Then
press ''Up/Down'' key on the remote control
or ''CH+/CH-'' on the front panel to select
'' ''. The machine perform search after pressing ''Right ''key on the
remote control or ''VOL+''on the front panel. (In the process of searching the channel
automatically, press the key of ''MENU'' on the remote control to stop searching).
Meanwhile, it will show Current Channel, Frequency. All of the TV programs will be
saved automatically.
Select to enter the submenu of . Then
press ''Up/Down'' key on the remote control
or ''CH+/ CH-''on the front panel to select '' ''. Then press the key
of ''Right'' on the remote control or ''VOL+'' on the front panel to enter submenu of
MANUAL SEARCH. Press ''Left/Right'' key on the remote control or ''VOL+/VOL-'' on
the front panel to select channel No.. Press ''Up/Down'' key on the remote control to
select ''SEARCH '', press ''Left/Right'' key on the remote control again, the machine
begin searching toward low frequency or high frequency. (In the process of searching
the channel automatically, press the key of ''MENU'' on the remote control to stop
searching).
TV
AUTO SCAN
MANUAL SEARCH
TV
MANUAL SEARCH
CH
2
53.00
MHZ
SEARCH
CHANNEL
2
45.25
MHZ
MTS Select MTS modes
"STEREO, MONO, DUAL , DUAL " four modes.
Page 21
20
Basic Operation Instruction
Select to enter the submenu of . Then
press ''Up/Down'' key on the remote control
or ''CH+/CH-'' on the front panel to select ''FINE TUNING''. Press ''Right'' key on the
remote control to enter submenu of ''FINE TUNING''. Press ''Left/Right'' key on the
remote control to adjust from low frequency or high frequency.
Select to enter the submenu of . Then
press ''Up/Down'' key on the remote control
or ''CH+/CH-'' on the front panel to select
'' ''. Press ''Right'' key on the
remote control to enter submenu of
'' '' (Press program list key on
the remote control to enter submenu of
'' '').
NAME: Press ''Cursor'' key on the remote control to select channel. Press ''1'' key on
the remote control to name. Press ''UP/Down'' key on the remote Control to select
l or number. Press ''Left/Right '' key on the remote control to and then
press ''UP/Down'' key on the remote control to select l or number. Press ''1'' key
on the remote control to confirm.
DELETE: Press ''Cursor'' key on the remote control to select channel which you wish
delete. Press ''2'' key on the remote control, and then press ''1'' to confirm.
SWAP ''Cursor''
FINE TUNING
etter move digit
etter
: Press key on the remote control to select channel which you wish
change name's position, press ''3'' key on the remote control, then press ''UP/Down''
key on the remote control to select channel, press ''1'' to confirm.
Select Channels with "CH+/CH-" Key
Press Program key on the remote control or "CH+/ CH-" key on the front panel to
select the channels.
Select channels with the Return key you can go to the last channel when pressing
the Return key. For example, if the last channel is 10 and the current channel is 20,
you will go to channel 10 when pressing the Return key. You can switch the two
favourite channels as you like.
TV
CHANNEL EDIT
TV
CHANNEL EDIT
CHANNEL EDIT
CHANNEL EDIT
001
003
004
005
006
007
008
009
010
002
011
012
013
014
015
016
017
018
019
020
021
022
023
024
025
026
027
028
029
030
1 NAME 2 DELETE 3 SWAP MENU EXIT
55.25
MHZ
FINE TUNING
Page 22
21
Basic Operation Instruction
Note: With the mode of
all functions and adjustments are similar with TV. User can
check it at convenience.
AV1, AV2, S-VIDEO1, S-VIDEO2, YPBPR, HDMI1,
HDMI2, PC
HDMI connector can realize DVI connector
function with external HDMI/DVI commutator.
Select Channels with Numeric Keys
1. Operations to select channels with 1 digit (0-9):
Press the number keys (0-9)on the remote control to select TV channel directly.
2. Operations to select channels with 2 digits (10-99):
Press the number keys with 2 digits (10-99) on the remote control to select TV
channels.
3. Operations to select channels with 3 digits (100-199):
Press the number keys with 3 digits (100-199) on the remote control to select TV
channels.
USB signal source operation
please insert USB memory card into USB interface of TV, press "source" key on the
remote control or front panel to select USB signal source (If you don't insert the USB
memory card into USB interface of TV, operation is invalid), press "OK" key to enter.
Notice: This USB interface only support move U dish, can't connect move hard drive,
also can't connect to USB interface of computer. USB support file format with Mp3/
JPG. It isn't compatible with some of move U dishes, please replace move U dish.
Page 23
Simple Troubleshooting
22
Symptom
Factor
Solution
Snowflake speckle and
sound noise.
1.Antenna cable connector is loose,
cable is damaged.
2.Channel setting is incorrect.
3.Antenna cable type is not matching.
4.Direction or position of antenna
cable is incorrect.
5.Signal is weak.
1.Check the antenna cable connector plug whether or
not loose, cable whether or not perfect.
2.Refer to channel setting method, resetting again.
3.Check antenna cable type(VHF/UHF)
4.Adjust direction or position of antenna cable .
5.Attempt to use signal amplifier.
TV image is better, but has
noise.
TV system setting is incorrect. Enter to "TV" menu, reset sound system again .
No image. No sound.
Power plug is loose, power cord
don't connect well.
1.Check power cord whether or not connect well.
2.Check if " " on the front panel is on.
3.Press "power" on the remote control.
TV image have stripe.
Signal is exposed to disturb,
such as car , neon light, electric
blower etc.
TV image have shadow.
1.TV signal is reflected by valley
or building.
2.Toward direction of antenna
cable is incorrect.
1.Use high directional antenna cable. Use FINE
TUNING of "TV".
2.Adjust toward direction of antenna cable.
No color.
1.Color saturation is too low.
2.Color system is incorrect .
1.Enter "PICTURE" to add up color saturation.
2.Enter "TV" to change color system.
TV no sound.
1.Volume setting is too low.
2.Sound is muted.
3.Sound system is incorrect.
1.Adjust volume to proper value.
2.Press "MUTE" button on remote control to
eliminate mute.
3.Enter "TV" to change sound system.
CAUTION: Don't let your machine display the same picture for a long time, please set up a screen protection
procedure. If a high contrast picture remains for along time, this picture will bring a 'leave shadow' in screen.
Usually the 'leave shadow' will disappear gradually when you turn off the machine power. However, this trouble
can't be repaired, Which isn't in range of warranty.
Electrical release at turning off.
It is normal.
Noise Signals at turning off.
Remote control distance is
short, lose control.
1.Remove objects, avoiding cover the receive
window of remote control.
2.Change battery.
Computer display faintly.
1.Adjustment is incorrect.
2.Display mode is incorrect.
1.Use auto-adjustment function.
2.Use commend mode.
Computer display image
excursion, not full screen,
over screen.
1.Adjustment is incorrect.
2.Display mode is incorrect.
1.Use auto-adjustment function.
2.Enter "GEOMETRY" to adjust horizontal or
vertical position.
3.Use recommended mode.
Computer no display, and
prompt no signal input, red
indicator LED twinkling.
Signal cable is loose or fall off.
Check signal cable whether or not loose, fall off,
reconnect well again.
Don't use electric blower around machine, adjust
antenna cable direction to reduce disturb.
Can not operate this
machine.
Exterior influence, for example
lightning, static electricity and so
on, which are possibly to disturb
the normal operation of this
machine.
Press " " button to turn off electrical source,
then press " " button to turn on the TV again
after 1-2minutes.
1.Receive window of remote
continue was covered by
objects.
2.The battery energy of remote
control is to low.
Loading...