Haier L15TC11W, 1510A-C, L1910B-C, L1911W-C, L2011W-C User Manual

USER'S MANUAL

LCD TV RECEIVER

Please read this manual carefully before
using your television and keep this manual
In a good place for future reference.

MODEL:
L1510A-C, L15C10A,
L1910A-C, L19C10A, L1510B-C,
L15C10B, L1910B-C, L19C10B,
L1911W-C,L19C11W, L2011W-C,
L20C11W, L1912W-C,L19C12W,
L2012W-C, L20C12W

L15T11W-C

LT15T1WW

To users:

Thank you for using our LCD-TV.

Before connecting the LCD-TV and turning the power on, please
read this book carefully. Please keep this book for later use. When it
was loss of function by electrostatic shock, please switch the on/off
button for restoring the function.

CONTENT

Safety Notice Items...................................................................................

Front Panel Controls..................................................................................

Connection Options...................................................................................

Remote Control Key Functions...................................................................

Remote Control ......................................................................................

Installing Batteries..................................................................................

Connection Instructions.............................................................................

Grounding..............................................................................................

External equipment Connections..............................................................

Antenna Connection.............................................................................

VGA Input.............................................................................................

YPbPr Input...........................................................................................

S-VIDEO Input....................................................................................

SCART Input.......................................................................................

HDMI Input..........................................................................................

Basic Operating Instructions.......................................................................

Turn on the LCD-TV.................................................................................

Audio Control..........................................................................................

Mute......................................................................................................

Select the TV Channel You Want...............................................................

Picture Mode...........................................................................................

Program Swap.........................................................................................

Program Scan.........................................................................................

Menu Operations.......................................................................................

Picture Menu Options...............................................................................

Picture Menu Options Continued...............................................................

Audio Menu Options................................................................................

Audio Menu Options Continued................................................................

Function Menu Options.............................................................................

Function Menu Options Continued.............................................................

Adjust Menu Options................................................................................

Tuning Menu Options..............................................................................

Tuning Menu Options Continued..............................................................

TELE TEXT...............................................................................................

Basic Playback..........................................................................................

Advanced Playback...................................................................................

Special Function Playback.........................................................................

JPEG DISC PLAYBACK............................................................................

SCREEN SAVER FUNCTION....................................................................

DVD System SETUP...................................................................................

General Setup Process.............................................................................

General Setup Page...................................................................................

Preferencel Page.....................................................................................

Playable Discs..........................................................................................

Disc Protection and DVD Characteristics.....................................................

Troubleshooting Guide...............................................................................

Specifications...........................................................................................

1
2
3
4
5
5
6
6
6
6
7
7
8
9
9
10
10
10
10
11
11
11
11
12
12
13
13
14
15
16
17
18
19
20
22
23
24
24
24
25
25
25
27
29
30
31
32

Safety Notice Items

Incorrect usage will cause fire or electric shock. To prevent this, please do
as required when you are installing, using and cleaning this machine. To insure
your safety and extend the life-span of LCD-TV, please read the following items
carefully before using:

l Please read and understand all the instructions before operation;
l Please keep the book for later use;
l Please comply with the warning instructions on the machine and in this book

strictly;

l Please comply with the instructions provided;
l Please do not use additional devices that are not recommended by

manufacturer:

l Before operation, please make sure that the operating voltage of your unit is

normal;

l Do not place the unit on unstable, dusty and humid places;
l Never put the unit in direct sunlight or near heat sources;
l Allow enough space for proper ventilation;
l Please keep water away from the LCD-TV . If water comes in contact with the

LCD-TV, disconnect the power cord from the power source, then wipe the set

with a dry soft cloth;
l Do not remove the back cover. If services were need, please refer to qualified
Personnel

Front Panel Controls

Control Panel Function

6

7

TV/AV MENU VOL- VOL+ CH- CH+ POWER

2 3 4 5

1. Power supply switch

2.TV/AV Select the input signals: PC

3. MENU Press to select the main menu

4. VOL- Volume down / Left orientation to adjust the item in the OSD
VOL+ Volume up / Right orientation to adjust the item/Press to enter

5. CH- TV channel down / to select the item in the menu
CH+ TV channel up / to select the item in the menu

6. Power indicator
Illuminates red in standby mode, illuminates green when the display is
turned on

7.Remote Sensor Receiving remote control sends the infrared remote
signal.

/COMPONENT/DVD/TV/

SCART/SVIDEO/HDMI

1

6
7

L1911W-C,L19C11W,
L2011W-C,L20C11W

L1510A-C, L15C10A, L1920A-C,
L1910A-C, L19C10A

TV/AV MENU VOL- VOL+ CH- CH+ POWER

2 3 4 5 1

6

7

L1510B-C,
L15C10B, L1910B-C, L19C10B,

6
7

L1912W-C, L2012W-C

6

7

L19C12W, L20C12W

Connection Options

The figure is just for reference, please see the real.

And the AC power supply switch is on the back of the set)

DVD

STOP PLAY/PAUSE OPEN/CLOSE

PREV NEXT

DVD insert

COMPONENT Input

Connect a component
video/audio
device to these jacks

PC Input

Connect to the VGA
15PIN analog output
connector of the PC
display card for PC
display purpose

S-Video Input

Connect S-Video out
from an S-Video device
to the jacks.

Antenna Input

Connect cable or
antenna signals to
the TV, either direc­tly or through your
cable box.

Earphone port

VGA /COMPONENT/
SVIDEO Audio Input

Connect the PC output
connector from a PC to
the audio input port

SCART

Connect to the DVD/
VCR/broadcasting
receiver or other
equipment

ANT IN

Y

Pr S-VIDEO

TV SCART VGA IN

AUDIO IN

Pb

ANT IN

Y

Pr S-VIDEO

TV SCART VGA IN

PC AUDIO IN

Pb

HDMI

HDMI

HDMI

Connect to HDMI
output of other
equipment

Remote Control Key Functions

When using the remote control, aim it
towards the remote sensor on the TV

Stand By

DVD Open/close

DVD 10+

Scan

Zoom

Mute

Swap

Call Screen Display

Program Number

TV and some other source Exchange

Digital Selector

TV/DVD

Volume/Channel Selection

MENU

DVD Audio

Picture Mode

DVD STOP

Tune Menu Button

DVD SETUP

DVD PAUSE/STEP

DVD FAST REVERSE

DVD FAST FORWARD

DVD MENU

DVD NEXT

DVD PREVIOUS

DVD REPEAT

DVD PLAY/ENTER

DVD A-B REPEAT

DVD Cursor Move button

DVD SLOW

DVD ANGLE

DVD SEARCH

DVD PROGRAM

DVD TITLE/PBC

DVD SUBTITLE

DVD CALL

TELETEXT BUTTONS

Exit Screen Display

Fast text coloured buttons

/

Buttons on the remote control

UP

DOWN

LEFT

RIGHT

POWER ZOOM

OPEN/CLOSE

SCAN SWAP CALL

MUTE

1 2 3 4

5 6 7 8

99 00

-/---/--

TV/AV

TV/DVD

P+

P-

V- V+

MENU

AUDIO P.STD

STOP

SETUP

PAUSE/STEP

REV FWD . PREV NEXT

D.MENU

REPEAT

A-B

PLAY/ENTER

SLOW

ANGLE

TITLE/PBC

SEARCH

SUBTITLE

D.CALL

10+

PROGRAM

TUNE

PICTURE SOUND TIME FUNCTION

EXIT

/

Remote Control Key Functions

Installing Batteries

3

2

1

1.Slide open the cover of the battery compartment on the back of the remote
control.

2.Load two AA alkaline batteries in the compartment. (plus and minus poles to
respective mark)

3.Replace the cover of the battery compartment.

Precautions

Make sure that there is no
obstacle between the remote
controller and television set.

As strong light may interfere the
signals, change your position to
operate the remote controller if
the television cannot be turned
on or off as you expect.

Keep the remote controller
away from heat source or
humid area to ensure
effective performance of
the remote controller.

Make sure that two AA 1.5V alkaline
batteries are loaded. The batteries
must be of the same type. The batteries
must be located properly. The batteries
are not rechargeable.

Connection Instructions

Ensure that you connect the grounding / earth wire to prevent possible
electric shock. If grounding methods are not possible, have a qualified
electrician install a separate circuit breaker. Do not try to ground the
unit by connecting it to telephone wires, lightening rods, or gas pipes.

Grounding

External Equipment Connections

Antenna Connection

- Antenna or Cable Service with a Cable Box Connections

- For optimum picture quality, adjust antenna direction if needed.

Multi-family Dwellings/Apartments
(Connect to wall antenna socket)

wall antenna
socket

VHF antenna
UHF antenna

outdoor
antenna

Single-family Dwellings /Houses
(Connect to wall jack for outdoor antenna)

Be careful not to bend the bronze
wire when connecting the antenna.

To improve picture quality in a poor

signal area, purchase and install a
signal amplifier.

If the antenna needs to be split for two
TV s, install a 2-Way Signal Splitter
in the connections.

If the antenna is not installed properly,
contact your dealer for assistance.

NOTE: All cables shown are not included with the TV

RF coaxial wire (75 ohm)

ANT IN

ANT IN

Connection Instructions

You can use your LCD-TV as a monitor for your personal computer using a VGA
cable (not supplied).

VGA Input

Connection and use steps:

1.Read the user guide supplied with
your computer and ensure that it has
a VGA connector;

2.Make sure that the power of the LCD

-TV and the PC are off;

3.Connect a D type 15-pin VGA interface
cable ( not supplied ) to the VGA video
interface connector on the PC. Then
connect the other end to the VGA video
interface connector on the back of the
LCD-TV.Tighten the screws on the VGA
connectors once they are firmly
connected;

4.Turn on the power of the LCD-TV first ,
and then turn on the power of the PC;

5.Press the TV/AV button to set the video
input mode of the LCD-TV to PC;

6.Check the image on your TV. There may be noise associated with the resolution,
vertical pattern, contrast or brightness in PC mode. If noise is present, change
the PC mode to another resolution, change the refresh rate to another rate or
adjust the brightness and contrast on the menu until the picture is clear. If the
refresh rate of the PC graphic card can not be changed,change the PC graphic
card or consult the manufacturer of the PC graphic card.

VGA IN

Frame frequency (Hz)Line frequency (Khz)

VGA

SVGA

XGA

640*480 31.5KHz 60Hz

800*600 37.9KHz 60Hz

1024*768 48.4KHz 60Hz

Resolution

Mode Resolution

Note: All above listed are subject to VESA Criteria.

YPbPr Input

How to connect

Connect the DVD video outputs (Y, PB, PR)
to the COMPONENT(Y, Pb, Pr) IN jacks on
the TV and connect the DVD audio outputs
to the AUDIO IN jacks on the TV, as shown
in the figure.
NOTE: If your DVD player does not have
component video output,use S-Video.

How to use

1. Turn on the DVD player, insert a DVD.

2. Use the TV/AV button on the remote control to select

Connection Instructions

COMPONENT (If connected to SVIDEO,select the SV external
input source.)

3. Refer to the DVD player's manual for operating instructions.

Component Input ports

To get better picture quality, connect a DVD player to the component
input ports as shown below.

S-VIDEO Input

Connection and use steps:

1.Read the user guide supplied with your AV devices and ensure that it has
S-Video connectors;

2.Make sure that the power of the LCD-TV and the AV device are off;

.Turn on the power of the LCD-TV first ;
and then turn on the power of the AV
device;

4.Press the TV/AV button to set the video
input mode of the LCD-TV to SVIDEO
mode .

Connection Option 1

Set VCR output switch to 3 or 4 and then
tune TV to the same channel number.

Connection Option 2

1. Connect the audio and Svideo cables
from the VCR's output jacks to the TV
input jacks, as shown in the figure.

2. Insert a video tape into the VCR and
press PLAY on the VCR. (Refer to the
VCR owner s manual.)

3

- To avoid picture noise (interference), leave an adequate distance between the
VCR and TV

.

VCR

1

2

Connection Instructions

SCART Input

1.Link the scart terminal of some other equipment,
such as DVD, to the TV SCART input terminal
of the television.

2.Press TV/AV to select SCART mode.

3. Press Play button on external equipment for
program play.

SCART

External equipment

Note: The audio cable included with the TV should be used when connected with PC/
COMPONENT/SVIDEO.
One side connected with the AUDIO IN terminal on the TV and the other side with right and
left track connected with the corresponding terminals of other equipment.

HDMI

HDMI

HDMI Input

How to connect

Connect the cables from the external equipment's
output jacks to the TV input jacks, as shown in the figure.

How to use

1. Select the input source by using the TV/AV
button on the remote control.

2. Operate the corresponding external equipment.
Refer to external equipment operating guide.

Basic Operating Instructions

Turn on the LCD-TV

Switch on the power button on the back of the set and the TV
will in standby mode. When the POWER button on the remote
control is pressed and the LCD-TV is turned on, the indicator
light on the front of the LCD-TV changes from red to green.
When the LCD-TV is turned off using the POWER button, the
LCD-TVwill go into standby mode and the indicator light turns
red.

Note:
The display of the input mode will disappear in about 8
seconds.
You can also turn on the TV by pressing digits(1-9) or P+/-.

Switch Among Different Inputs: PC/COMPONENT/HDMI/DVD/TV/SCART/SVIDEO

Each time you press the TV/AV button,

will appear on the screen in the order.

Note:
The display of the input mode will disappear in about 8 seconds.

TV, SCART , PC, COMPONENT,
SVIDEO,DVD,HDMI,
Each time you press the TV/DVD button, the current inputs and DVD will appear
on the screen in the order.(When TV is switched from DVD to other inputs, DVD
may operate for about 10 minutes first).

Audio Control

1.Press the V+ button to increase the volume. A number will appear on
screen indicating the volume level.

2.Press the V- button to decrease the volume. A number will appear on
screen indicating the volume level.

Mute

1.Press the MUTE button to mute the sound temporarily. A mute icon
appears on the screen.

2.Press the MUTE button again or V+/V- to restore the sound.
The mute icon disappears.

POWER ZOOM

OPEN/CLOSE

SCAN SWAP CALL

MUTE

1 2 3 4

5 6 7 8

99 00

-/---/--

TV/AV

TV/DVD

P+

P-

V- V+

MENU

AUDIO P.STD

STOP

SETUP

PAUSE/STEP

REV FWD . PREV NEXT

D.MENU

REPEAT

A-B

PLAY/ENTER

SLOW

ANGLE

TITLE/PBC

SEARCH

SUBTITLE

D.CALL

10+

PROGRAM

TUNE

PICTURE SOUND TIME FUNCTION

EXIT

The display will appear on the screen when the TV is turned on the first time:
(Different displays for different countries, please see the real set)

AUTO SEARCH

UNITED KINGDOM

NO

Press V+/- to adjust among FRANCE, UNITED KINGDOM and OTHER just
according to the country you are in, P+/- to select the option and MENU to confirm.

YES

or

AUTO SEARCH

OTHER

NO YES

FRANCE

Basic Operating Instructions

Select the TV Channel You Want

You can use the number keys on the remote control to directly select TV
channels.
The LCD-TV can store up to 100 channels , and you can press the keys on the
remote control or on the panel to make a selection.

1. if you want to choose any channel from 0 to 9, please press the -/-- button
Until - is indicated on the screen and then press the relevant key on the
remote control. for example: if you want to choose channel 8, just press the
Key number 8.

2.If you want to choose a channel bigger than 9, please press the -/-- button
until -- is indicated on the screen. Enter the two digits of the channel
number you want to watch.. for example: select channel 16
Note: if you want to choose one digit channel in this condition, you should press
0 first and then one digit number key.

Picture Mode

Press P.STD button on the remote control for menu display . For desired mode as
follows:

PERSONAL STANDARD MILD FRESH

Program Swap

1

2

3

Suppose the channel number you used just now is 8 and the channel number you

are using is 18 (as shown in the figure).

If you want to return to the last watched program channel 8, you can simply press the

SWAP button.

If you want to return to channel 18, press the button again. Through this function, you

can easily change between the channel you are using and the channel you used last time.

Program Scan

1 Press the SCAN button to scan through all the memorized TV channels. The scan will
pause for about 2 seconds on each channel.
2 If you want to stop the function during auto scanning, simply press the SCAN button
again.

Menu Operations

Picture Menu Options

1. Press MENU button to display the main menu, and V+/V-to select the
main menu .

2. Press P+/P- to scroll through the options

3. Press V+/V- buttons to make changes to the parameters

4. Press the EXIT button to exit the menu

* In this manual, the OSD (On Screen Display) may be different from your TV s
because it is just an example to help you with the TV operation.
Press TV/AV or TV/DVD to select the input source, and the menu in the different
source is different .

Picture quality can be adjusted for any input separately .

The picture quality on the screen can be adjusted as follows:

1. Press MENU button and V+/V- until the following menu appears
on the screen.

2. Press P+/P- button to enter the picture menu and to go up and down to
select the desired option .

TV/SVIDEO SCART MENU/DVD/

Note: Sign on top of the menu in this manual may be different from the real

PC MENU

PICTURE

BRIGHTNESS
CONTRAST
SHARPNESS
COLOUR TEMP.

30

30
30

2

COLD

PICTURE

BRIGHTNESS
CONTRAST
SHARPNESS
COLOUR
H.POSITION
V.POSITION

30

30
30

2

30

COMPONENT/HDMI MENU

0
0

BRIGHTNESS
CONTRAST
SHARPNESS
COLOUR
NOISE REDUCE
HUE

PICTURE

50
50

2
50

OFF

Only available in NTSC system

50

Menu Operations

3.Press V+/V- button to increase and decrease the level to adjust the
selected option to your preference .

4. Repeat step 2 and step 3 until desired picture quality has been achieved .

Function:

:Adjust the brightness of the picture . By increasing the level, it
will add more light to dark parts of the picture and by decreasing the level ,it will
add more dark to light parts of the picture.

: Adjust the contrast of the picture . The image becomes higher as

the number increase.

: Adjust the amount of the detail enhancement , the image
sharpness rises as the number increases (By increasing the level, it will show
cleaner and clearer images and by decreasing the level, it will make picture
smoother).

COLOUR : Press V+/V- to adjust the color

NOISE REDUCE: Adjust the quality of the picture by selecting OFF,LOW,MID,HIGH.

: Adjust the tone of the picture . Appear and be adjusted only under NTSC
mode

: Press to select the color temperature from

H.POSITION : Picture horizontal adjust

V.POSITION : Picture vertical position adjust .

BRIGHTNESS

CONTRAST

SHARPNESS

HUE

COLOUR TEMP. WARM/NORMAL/
COLD

.

Picture Menu Options continued

Audio Menu Options

Sound can be adjusted for any input as follows:

1. Press MENU and V+/V- button until the following menu appears on
the screen

VOLUME
BALANCE
BASS
TREBLE
AUDIO MODE
AVL

AUDIO

50
50

50
50

VOICE

OFF

Menu Operations

Audio Menu Options continued

You can adjust sound options to the levels you prefer.

2. Press P+/P- button to enter the audio menu and to go up and down to
select the desired option .

3.Press V+/V- button to increase and decrease the level to adjust the
selected option to your preference .

4. Repeat step 2 and step 3 until desired sound quality has been achieved ..

Function :

: Adjust the volume of your TV

: Adjust the balance of the audio output from left to right . When
indication value of balance increases toward 100 , sound of the left speaker
becomes weaker . When indication value of balance decreases toward 0 ,
sound of the right speaker become weaker .

: Adjust the bass of the sound . Can only be adjust under mode .

: Adjust the treble of the sound . Can only be adjust under

mode .

: Press V+/V- to select among and

.

: Automatic Volume Limit Control reduces the effect of the large volume by

the same volume of all the channels .

VOLUME

BALANCE

BASS PERSONAL

TREBLE PERSONAL

AUDIO MODE PERSONAL, VOICE, MUSIC
THEATRE

AVL

Menu Operations

Function Menu Options

1. Press MENU button and V+/V- until the following menu appears
on the screen.

2. Press P+/P- button to enter the sound menu and to go up and down to
select the desired option .

3.Press V+/V- button to increase and decrease the level to adjust the
selected option to your preference .

4. Repeat step 2 and step 3 until desired picture quality has been achieved .

Functions:

1. : Display current mode . There are
to display

2. LANGUAGE: Used to select the OSD language.

3. : To switch the teletext languages.

4. To select or .

5. : To select the display mode between and

6. :

7. : Press V+ to reset some settings to the factory default .

8. HOTEL LOCK: Press V+ to enter it and the following appears on the screen:

INPUT SOURCE

TXT LANGUAGE

TXT EAST/WEST: EAST WEST

DISPLAY MODE 4:3 FULL SCREEN

BLUE SCREEN

RESET

PC , COMPONENT ,

HDMI, DVD , TV, SCART, SVIDEO

To set , the screen will be in blue screen after 3 seconds

if there is no signal.

On

INPUT SOURCE TV
LANGUAGE ENGLISH
TXT LANGUAGE PAN EUROPEAN
TXT EAST/WEST EAST
BLUE SCREEN ON
DISPLAY MODE 4:3
RESET
HOTEL LOCK

FUNCTION

Only available for special series

PASSWORD:

- - - -

If password is correctly entered, the Lock set menu will be entered. If the
password is not correctly entered, you will be required to reenter the password
and the cursor will stay at the first place. Lock set menu is as follows:
(The initial password is 0000. If CLEAR LOCK is activated, the password

)comes back to initialization and each lock is canceled

Menu Operations

Function Menu Options Continued

PASSWORD: The password can be changed. Press P+/- to select PASSWORD
and V+ to enter. The screen will display NEW PW: ----, then enter the new
password and the screen display CONFIRM PW: ----, if the same password
is entered correctly twice, the old password will be changed.

TUNER LOCK: Press P+/- to select Tuner Lock and V+/- to set ON/OFF.(To set ON,
some operation such as search will be not available. When enter the TUNING menu,

will be on the screen, and the time will be the same with the main
menu .if no operation. If you want to operate TUNING menu again, you need to
enter the menu to set TUNER LOCK OFF or operate CLEAR LOCK.

PROG.SET:O

SOURCE LOCK: O

TUNER LOCK

pted for setting up start condition. Press P+/- button to select it.

Press V+/- button, sources can be swapped in HDMI/

mode. After setup, the set mode will be entered if the

television is switched off and on again.

Opted for setting up preset channel. Press P+/- button to select it.
Press V+/- button, to select channel number.(The item is not available except
TV signal.)

CHILD LOCK: Press P+/- button to select it. Press V+/- button to set on or off mode.
If lock on mode is set, child lock is inactivated . In such case, if child
lock button(button on the television) is pressed, the screen will display .
The child lock mode can be canceled by entering lock set menu, set child lock off
or activate clear lock.

pted to hinder external input modes, such as PC. Press P+/-

button to select the option, and press V+ button to display the menu as follows:

DVD/COMPONENT/PC/

SVIDEO/SCART/TV/OFF

To set Off, the television will memory the

off-mode.

CHILD LOCK

PROG.NUM:

PASSWORD
TUNER LOCK OFF
PROG. SET TV
PROG. NUM 4
SOURCE LOCK
CHILD LOCK OFF
MAX VOLUME 50
VOL SET OFF
INITIAL VOLUME 50
CLEAR LOCK

LOCK SET

PC

OFF

SVIDEO

SCART

COMPONENT

TV

SOURCE LOCK

OFF

OFF
OFF

OFF

HDMI

OFF

DVD

OFF

Menu Operations

Function Menu Options Continued

Press P+/- button to select desired option. Press V+/- button to set up the
mode .

In lock on mode, when screen is blank, will be always
displayed on the screen. ,
enter SOURCE LOCK submenu and set the mode off, or activate CLEAR LOCK .

MAX VOLUME:Press P+/- button to select it. Press V+/- button for adjustment
between 0 100. If a certain value is set, when volume is being adjusted,
the sound value can not exceed that maximum volume value.

VOL SET: Press V+/- to select ON or OFF.

INITIAL VOLUME(only works when VOL SET is set ON): Used to memory the volume
you have set when you turn on your TV after turn off it. (Eg., When INITIAL VOLUME
is set to 50, you can still adjust the volume above or below 50 by V+/- . If the TV is
turned on the second time, the volume will resume 50)

CLEAR LOCK: Press P+/- button to select it. Press V+/- button to unlock all set
modes, setting all lock options to off, and the maximum volume returns to .

If some source is set on,

SOURCE LOCK

100

The screen will display blue background with the

mute mode and Lock icon when you enter the source.

If you want to cancel the lock of some source mode

Adjust Menu Options

1. Press MENU and V+/V- button until the following menu appears on the
screen

ADJUST

AUTO SYNC.
PHASE
CLOCK
H. POSITION
V. POSITION

Note: This menu is only appears in PC mode .

2. Press P+/P- button to enter the adjust menu and to go up and down to
select the desired option

3.Press V+/V- button to increase and decrease the level to adjust the
selected option to your preference .

4. Repeat step 2 and step 3 until desired quality has been achieved.

Functions:

: Is opted for adjustment of picture location frequency and phase

parameters .

AUTO SYNC

50
50

50
50

Menu Operations

Tuning Menu Options

PHASE : Removes any horizontal distortion and clears or sharpness the displayed
characters .

CLOCK : Adjust the TFT-LCD to match the PC input source

H.POSITION : Picture horizontal adjust

V.POSITION : Picture vertical position adjust .

1. Press MENU and V+/V- button until the following menu appears on the
screen

Note: This menu is only appears in TV mode .

2. Press P+/P- button to enter the tuning menu and to go up and down to
select the desired option .

3.Press V+/V- button to increase and decrease the level to adjust the
selected option to your preference .

4. Repeat step 2 and step 3 until desired quality has been achieved ..

Functions:

1.TUNING PROGRAM: Press V+ to enter it and the TUNING PROGRAM menu
appears:

CHANNEL : Press V+/V- to change the TV channel .
EDIT NAME: Press V+ to enter it , then press V+/- to select the position you want to
edit and press P+/- to input the emblem such as character and so on.(There are 8
position for you to edit totally)

COLOR SYSTEM : Select the TV color system from AUTO,PAL,SECAM.

TUNING PROGRAM
AUTO SEARCH

TUNING

CHANNEL 1
EDIT NAME
COLOR SYSTEM AUTO
SOUND SYSTEM DK
SKIP OFF
AFC ON
FINE TUNE
EXCHANGE
MANUAL SEARCH

TUNING PROGRAM

143.65MHZ

Menu Operations

EXCHANGE : Press V+ to display the menu as follows:

Press P+/- to select the item and then V+/- to adjust the channel and V+
to confirm.( For example: press P+/- to select FROM item, and then press
V+/- to adjust the channel number to 1; then Press P+/- to select TO item,
and V+/- to adjust the channel number to 9; press P+/- to select EXCHANGE item,
and then V+ to confirm. The two channels will be exchanged)

MANUAL SEARCH : Press V+ to start to search the channel . The following menu
will display on the screen:

Press V+/- to select UP or DOWN, and then press MENU to confirm.
(If you select DOWN, the search will search the lower frequency channel and UP
will search the higher frequency channel)

2. AUTO SEARCH : Auto search and save the channel .Press the V+ button to
start to search the channel and the following menu will appears on the screen:

Press V+/- to select YES or NO, and menu to confirm.
You could press MENU to stop the search.

NOTE: If you want to search the channels in L or L' system, you need to set the sound
system to L in OSD

FROM : 1

TO : 9

EXCHANGE

EXCHANGE

MANUAL SEARCH

UPDOWN

AUTO SEARCH

YESNO

SOUND SYSTEM : Select the TV standard system from DK,I,L/L',BG

SKIP : If you want skip a channel , press V+/V- to select ON , and this
channel will be skip next time when you press P+/P- . But you can press
digits button to select the channel . If you want to restore the channel , select OFF.

AFC : Auto frequence control . Select ON to improve the image quality .

FINE TUNE :Press P+/P- to select FINE TUNE item in menu . Then , press V+/V-
button to adjust and improve the image quality .

Tuning Menu Options Continued

TELETEXT

P+

P-

V- V+

MENU

Teletext

Teletext is an information system, broadcast by certain channels, which can be read like
a newspaper . It also provides subtitles for people with hearing difficulties or those who
are unfamiliar with the language in which a particular program is being broadcast (cable
networks, satellite channels, etc.).

Teletext functions

Page up/down
Use the P+/- buttons to browse next or previous page.

Page number entering

Mix mode

Volume adjustment
Mute function

1 2

3

4

5

6

7

8

9

0

To select Teletext press the Teletext button on the
handset. To switch off Teletext, press the button again.

Note all menu functions are not available in Teletext
mode . Only a few direct button control functions are
available in TELETEXT mode, they are:

To select a Teletext page, enter the page number using
the numeric key pad on the remote control, or use the
P+ or P- buttons, or the coloured Fast text buttons.

To view the TV picture while in Text mode press the
button, this will superimpose the Teletext data on top
of the Tv picture. Press this button again to return to
Full text.

TUNE

INDEX

Press the tune button to go to the index page of teletext.

Note: The teletext buttons could be working even if there is no teletext signal, but there
is no teletext display.

TELETEXT

Teletext

Cancel mode
This feature allows the TV picture to be displayed while next
page to be searched is entered and found. Only the top
teletext line is displayed until the page is found. Press the
button to hide the teletext information. Either press the
button or the Text button to exit the cancel display mode.

Language change
Pressing the button will change the Teletext characters
between Eastern and Western.

Hold
Pressing the button will stop the teletext page automa­tically updating. This feature is very useful where there are
several teletext pages or data on the same page number.

Size
Pressing the button changes between full screen top
half bottom half full screen. This feature is very useful as it
magnifies the image making the characters easier to read.

Reveal
Pressing the button will reveal hidden text. This feature
is used to reveal information such as answers to Teletext
on-line interactive puzzles.

Subcode / Time
By entering its 4-digit number to enter a secondary page;While
in normal TV mode only, pressing the button will display the
teletext time in the top right hand corner for a few seconds.

Switch teletext on/off
Press the button on the remote control to turn teletext
On/Off.

Fast text coloured buttons
Fast text automatically displays the four most commonly
used pages that the broadcaster thinks that you may want
to choose next. Press the same coloured button on the
remote control as the coloured link at the bottom of the
teletext page to go directly to that page.

Subtitle

Pressing the button will get the teletext decoder to
automatically search for the subtitle page.

PICTURE SOUND TIME FUNCTION

Basic Playback

Preparations

Press the TV/DVD button on the front panel or
TV/DVD on the remote control to enter the DVD
status. Press the TV/DVD button on the front
panel or TV/DVD on the remote control again to
return to the TV mode.

1. Press OPEN/CLOSE to open the disc tray,
place a disc on the disc tray. If there is no disc
placed on the disc tray in DVD mode, OPEN will
display on the screen all the times)
There is only one disc size . Place the
disc in the correct guide on the disc tray. If the
disc is out of the guide, it may damage the disc
and cause the DVD player to malfunction.
Do not place a disc which is unplayable in this
DVD player.

2. Press OPEN/CLOSE to close the disc tray, the
playback will automatically start.
Some disc may not playback automatically,
you can press PLAY/ENTER button to start
playback.

3. Some disc may start playback with a menu,
use the cursor button on the remote control to
select menu options and press PLAY/ENTER to
start, or press digits to select a menu options
directly.

1. Press PAUSE/STEP to pause playback (still mode).
The sound will be muted during still mode.

2. Press PLAY/ENTER to resume normal playback.

Pause playback

1. Press STOP button to go to stop mode, the TV

screen will show the start-up logo. For some disc
the player can recall the location where stopped,
such as DVDs and audio CDs.

2. Press ENTER/PLAY to resume playback from the
location where playback is stopped.

3. Press STOP twice to stop completely.

Stop playback

Previous and Next

During playback, press PREV key can go back

to the beginning of this chapter, then each press of
this key will skip a chapter till the start of the disc.
(note: Disc function may vary depending on disc
format)
Each press of NEXT key during playback will
skip the current chapter and play the next one.

Fast forward and Fast reverse

1. Press FWD to fast forward through the disc.

Each time the FWD button is pressed, the fast
forward motion speed changes. It would cycle
through

2. Press PLAY/ENTER to resume normal playback.

3. Press REV to fast reverse through the disc.

Each time the REV button is pressed, the fast
reverse motion speed changes. It would cycle
through .

4. Press PLAY/ENTER to resume normal playback.

2X, 4X, 8X, 16X, 32X and normal.

2X, 4X, 8X, 16X, 32X and normal

Basic playback

1. Press the PAUSE/STEP button to pause the

playback.

2. To view the next frame, press the PAUSE/STEP
button. Each press of the PAUSE/STEP button
advances the film by one frame.

Single step playback

Basic Playback

Note: The unit do not allow enter DVD mode again
after it have just left to avoid any damage of the
DVD. Wait for 10 second to enter again.

Press this button can zoom enlarge or lessen the picture.
Each time pressed the picture times will be change.

ZOOM

When pressing the D.CALL button repeatedly
different OSD indicator will be displayed for
different types of disc DVD, CD etc

D.CALL

In zoom mode press navigation buttons to move
the picture displayed on the screen

Advanced Playback

PROGRAM

When playing discs, press " PROGRAM " to
enter program mode. Press the digit buttons to select
the program number that you want. When finished,
move the cursor to select "START" . This will start the
program playback. If you want to cancel this function,
press " STOP " , then press "PLAY/ENTER" .

REPEAT

IMPORTANT NOTE:

ALL DESCRIBING FUNCTION IS FOR DVD DISCS. IF YOU PLAY OTHER FORMAT DISC, THE
OPERATION AND DISPLAY ON SCREEN MAY DIFFERENT.

SUBTITLE

Press " ", the screen will display "

", "01" indicates the ordinal
number of this language; "XX" indicates total number
of language; "XXXXXX" indicates the language of
country. (the number of language depends on disc).
This function can select up to 32 languages display­ed on screen.

SUBTITLE SUBTI-

TLE 01/XX XXXXX

REPEAT A-B

Press A-B to mark the start-point, press again to
set an end point to complete setting. The
selected section A-B will be repeated immediately.
Press the Repeat A-B again to cancel this function.

SEARCH

Advanced Playback

SLOW PLAY

Press SLOW to play a disc in slow forward. Each time
the SLOW button is pressed, the slow motion
speed changes.
Press PLAY /ENTER to resume normal playback.

Note: This function is invalid for CD .

D.MENU

Press this key to display root menu, select item
according to your preference. (This function will
work with a DVD having a multi-layer menu.).

ANGLE

When enjoying sports, concert or theatre, press this
key to watch same actions in different angles. (Valid
for discs possessing this function. Using a disc
recorded in multi-angle you can view the scene from
different angles, for example, front, side, whole
view and exterior scene.)

Press this key can change the audio mode.
such as:

If you play CD disc, press this button can cycle among
Mono Left, Mono Right, Mix-Mono and Stereo.

Audio 1/2: AC 3 2 CH English

Audio 2/2: AC 3 5.1 CH English

AUDIO

TITLE/PBC

With some DVD discs pressing this key will display the
title menu. You can then use the digit buttons to select
the item you prefer.

Note: When press this button continuously, you must
above 3 seconds interval.

Press "SEARCH" once to display the search menu.
Use the up/down navigation buttons to select the
item you require. Press PLAY/ENTER to confirm
(CD press the search button
several times to select the item). And then press
the numeric buttons or navigation buttons to input
the item you require. Press PLAY/ENTER to confirm.

Press REPEAT button multiple times to reach
desired play mode:
DVD
Chapter repeat, Title repeat, All repeat
CD
Track repeat, All repeat

Special Function Playback

JPEG DISC PLAYBACK

Insert a Kodak picture CD or JPEG picture CD into the tray and the disc will be loaded
automatically. If the disc type can be identified, the player will start showing the pictures one by one
(slide show mode).If a navigation menu will be displayed use the navigation buttons to select a file,
then press the PLAY/ENTER button.
Each picture in the CD will be displayed consecutively in a slide-show fashion and will be scaled to
fit in the whole TV screen. Some slide show transition modes are provided, use "PROGRAM" key to
select. Customer can set transition effects for each picture.
To display an image indefinitely, press the "PAUSE" key. To view the next or previous picture, press
"NEXT" or "PREV" key. To resume the slide show, press the " PLAY/ENTER" key.
Press the STOP button to preview the photos in a folder. Press navigation buttons to rotate a picture.

If this unit is not working by 3 minutes, it will go to sleep mode with screen saver on. In this mode,
you can press any key on remote control or on front panel to activate the unit.
You can set SCREEN SAVER function to OFF in GENERAL SETUP PAGE of DVD SYSTEM

SETUP.

SCREEN SAVER FUNCTION

MPEG4 DISC FUNCTION INTRODUCTION

AVi_1
AVi_

2

AVi_ 3
AVi_ 4

AVi_

5

AVi_

6

00:00 00:00
001/010

MPEG-4 is the forth video and audio encoding standard released by
MPEG (The abbreviation of " Moving Pictures Experts Group"). VCD is
based on MPEG-1 technology and DVD is based on MPEG-2. MPEG-4
takes advantage of narrow bandwidth, pursue the best picture quality
by compress and transmit the data in frame reconstruct technology.
The audio data is compressed by WMA or MP3 standard. MPEG-4 is
the most advanced compression technology standard in AV field. It has
the highest compression rate. By MPEG-4 technology, we can encode
and compress a DVD film into one or two CD-R disc with pretty good
picture quality, or can burn several films that has same quality as VCD
into one CD-R disc, or can burn several films that has similar quality to
DVD into DVD-ROM disc.

Note:

1. The MPEG-4 discs in market now have many different formats, such as XVID, AVI, DIVX, RM etc. But
some

discs with "MPEG4" logo in market are not encoded by MPEG technology.

It is normal that some of the discs

can't be played well in this player because of the incorrect encoding standard.

SETUP

DVD System Setup

DVD System Setup

General Setup Process

1.Press the SETUP button, the
General Setup Page,Preference
Page will be displayed in turn.

2.Press CH+/- b to select, the
item, then press to enter the
submenu.

3.Press CH+/- bu to select then
press PLAY/ENTER to confirm.

4.Press SETUP repeatedly to
exit the set-up menus.

or

or

General Setup Page

When using the DVD with the internal TV,
select . 4 3/LB

The following information applies only
when the DVD output is connected to an
external TV.

(PS = Pan and Scan)
You may select if you have a normal aspect
ratio (4:3) TV, although the NORMAL/LB
(letter box) is a more common choice. In PS
mode, widescreen material will fill the screen, but at the expense of chopping
off extreme left and right edges of the original film picture. For this feature to
work, the disc must be specially coded. Such discs are uncommon.
(LB = Letter Box)
You may select this if you have a normal aspect ratio (4:3) TV. Widescreen
material will be shown in pure unaltered form, allowing the entire picture area
of the original film to be viewed without any side cropping. Black bars will
appear above and below the picture.

You may select this if you have a widescreen (16:9) TV. Back bars may still
appear above and below the picture even if using a widescreen TV. This is
because some film directors prefer to use ultra widescreen aspect ratios e.g.

2.35:1. This will normally be indicated on the DVD packaging.

4 3/PS

4 3/LB

16 9

ASPECT RATIO DESCRIPTION

..General Setup Page..

Tv Display 4:3 LB
Angle Mark On
Osd Lang ENG
Caption On
Screen Saver Off

4 3/Ps
4 3/Lb
16 9

.

.

PAL
AUTO
NTSC

..Preference Page..

TV Type
Parental
Password
Default

Auto

PLAY/ENTER

SETUP

PLAY/ENTER

..General Setup Page..

4 3/Ps
4 3/Lb
16 9

.

.

TV Display 4:3 LB
Angle Mark On
OSD Lang ENG
Caption On
Screen Saver Off
Hdcd Off
Last Memory On

DVD System Setup(Continued)

DVD System Setup

TV Display 4:3 LB
Angle Mark On
Osd Lang ENG
Caption On
Screen Saver Off
Hdcd Off
Last Memory On

..General Setup Page..

Tv Display 4:3 LB
Angle Mark On
Osd Lang ENG
Caption On
Screen Saver Off
Hdcd Off
Last Memory On

..General Setup Page..

Off
1
2

..General Setup Page..

On

Off

Tv Display 4:3 LB
Angle Mark On
Osd Lang ENG
Caption On
Screen Saver Off
Hdcd Off
Last Memory On

Tv Display 4:3 LB
Angle Mark On
Osd Lang ENG
Caption On
Screen Saver Off
Hdcd Off
Last Memory On

Tv Display 4:3 LB
Angle Mark On
OsdLang ENG
Caption On
Screen Saver Off
Hdcd Off
Last Memory On

Tv Display 4:3 LB
Angle Mark On
Osd Lang ENG
Caption On
Screen Saver Off
Hdcd Off
Last Memory On

General Setup Page

Caption: This function allows you to

display or hide the caption.

Screen Saver: If the screen saver is on,then there

will be an animated picture of DVD on the screen
whenever the DVD player is idle for more than 3
minutes .

..General Setup Page..

..General Setup Page..

On

Off

This item allows you to set Angle Mark ON or OFF.

Angle Mark: Users can select a particular

camera angle when playing a DVD which offers
multiple angles.

.

On
Off

On Screen Display (OSD) Language: Users
can select on-screen display language.

..General Setup Page..

English
French
German
Spanish
Italian

Hdcd

1X or 2X

: When default setting is off, it will display "CD"

by reading HDCD, for HDCD playback, please choose

.

..General Setup Page..

Last Memory: Memorize the chapter you have

just watched. When last memory is on , if you turn
on the DVD again after off it will display from
the chapter you watched when you turn off the
DVD

..Preference Page..

DVD System Setup(Continued)

DVD System Setup

The Preference Page is only available when there is no disc
in the player. These settings are applied consistently to all
discs which are inserted and played.

Preference Page

TV Type

MULTI(Auto),

NTSC, and PAL

MULTI

: This player
supports different TV output,
including

systems.

Usually please set to .

Parental

OFF

: The parental

control function works in
conjunction with the
different censorship classes
assigned to DVDs. These
classes help to control the
types of DVDs that the family
watches, There are up to 8
censorship classes for DVDs.

Note:
1 To change this setting you must enter your password.

(Initial password is 1234)
2 When set to , all discs may be viewed.

Password change:

You can change your password
by entering 4 digits. Your must
confirm the 4 digits before the
new password can be accepted.

NOTE:If you forget your password
or a password is accidentally set
enter 1369 as the password. This
will enable you to regain control.

..Preference Page..

..Preference Page..

2 G
3 Pg
4 Pg 13
5 Pgr
6 R
7 Nc17
8 Adult
Off

Old Password

New Password

Confirm Pwd

PAL
AUTO
NTSC

TV Type
Parental
Password
Default

Auto

TV Type
Parental
Password
Default

Auto

TV Type
Parental
Password
Default

Auto

Change

SETUP

PLAY/ENTER

DVD System Setup(Continued)

DVD System Setup

Default: Resets all settings

(except password and parental
lock status) for this DVD player
back to the manufacturers
original settings. Press ENTER
to perform the reset.

Note:

Some functions may not be available depending on the type of disc.

..Preference Page..

Reset

TV Type
Parental
Password
Default

Auto

SETUP

PLAY/ENTER

Playable Discs

The following discs can be played:

You cannot play discs other than those listed above.
You cannot play non-standardized discs, even if they may be labeled as above.
The performance of CD-R or CD-RW disc is depend on the way of disc-burning. In a few
cases, their performance may not be very well or even not playable.

MPEG4

Support discs: DVD, VCD, CD-R, CD-RW, SVCD, DVCD, HDCD, JPEG,CD+G, MPEG-4,
Kodak CD , W MA.

Compare DVD disc with other discs:

Dics Protection and DVD Characteristics

DVD LD

SVCD

VCD CD

Encode
method

Digital/MPEG

Analog

Digital

Digital/

MPEG

Digital

Capacity

650MB 650MB 650MB

133
minutes

242
minutes

266
minutes

484
minutes

Playing Time

Single-side
60 minutes
double-side

120 minutes

45 minutes

74 minutes 74 minutes

12cm 12cm

Disc diameter

30cm/20cm

12cm 12cm

Horizontal
resolution

More than 500 line

No more than

430 line

No more than

350 line

No more than

250 line

Multiple kinds

Picture
proportion

One kind

One kind

One kind

Subtitle

32 kinds

16 kinds
at most

4 kinds

Sound quality

48KHz, 96KHz/

6, 20, 24bit

44.1KHz/
16bit

44.1KHz/
16bit

44.1KHz/
16bit

44.1KHz/
16bit

Single­side
single­layer

4.7G

Double

-side
single

-layer

8.5G

Single­side
double­layer

9.4G

Double­side
double­layer
17G

I

To assist in location possible faults use help guide below.

Note:

1.If the fault can not be repaired using the above guide consult with your local authorized service
center.

2.The TV set must only be repaired by a qualified registered service person. Never attempt to
remove the back cover as the TV set has dangerous voltages in side that may cause a fatally or fire.

Troubleshooting Guide

Troubleshooting

No picture, no sound

Verify if the television is properly plugged.
Verify if the television is properly supplied power.
Verify if electricity is available.

Blank screen

Verify if correct signals are input.
Press TV/AV button to change signal input to TV input.
Restart the television of power supply is interrupted.

No sound

Press button and verify if Mute mode is set.
Switch to other channel and verify if the same problem
happens.
Press VOL+ button to see if the problem can be solved.

MUTE

Poor sound

Verify if sound system is correct. Refer to some chapter
for adjust.

No picture in some
channel

Verify if correct channel is selected.
Adjust the antenna.
Make adjustments by and FINE TUNE MANUAL SEARCH.

No color for some channel
program (black and white)

Verify if the same problem exists in other channels.
Check out of picture and sound systems.
Refer to relative instructions in the Manual for color
adjust.

Spots with some or
all pictures

Verify if the antenna is correctly connected.
Verify if the antenna is in good condition.
Make fine adjustment of channel.

Television out of control

Disconnect the television from power supply and, 10
seconds later, connect the television to the power supply.
If the problem still exists, contact authorized after-sales
service for technical assistance.

Specifications

Note:
All specifications are subject to change without notice.
All quality are approximate value.

Specifications of the television that you have just purchased may
vary from the information in this table due to technical innovations.

Accessories

Picture, sound
system

Audio output

External input port

Power requirements

Temperature

1.5W+1.5W

COMPONENT input PC input S-VIDEO input
Audio input SCART HDMI input Antenna input

~150-240V 50/60Hz

PAL/SECAM-B/G,I,D/K,L,L

Working:5 C~35 C

Storage:-15 C~45 C

Note Warranty card is only for the special countries and areas

Power consumption

60W

Model

L1510A-C, L15C10A,
L1510B-C, L15C10B

L1920A-C,L1910A-C,L1910B-C
L19C10A, L19C10B,L20C11W
L1911W-C,L19C11W,L2011W-C
L20C12W, L1912W-C,L19C12W,
L2012W-C

50W

Remote control
Batteries

Owner s manual
Warranty card
Audio cable

'

Humidity

Working:20%~80%

Storage:5%~90%

V0.1
0090508942F