Grundig LS7140 User guide

LADY SHAVER WASHABLE
LS 7140
DENOEN
NL
ESPLFR
PT
ITTRSV
EL
_________________________________________________________
A
G
B
C D
I
E
F
H
KJ
3
SAFETY _________________________________
Please note the following instructions when using the appliance:
7
This appliance is designed for do-
mestic use only.
7
This appliance is designed solely
for shaving human body hair. Any other use is expressly prohibited.
7
When the appliance is being
charged, on no account should it come into contact with water or any other liquid.
7
Never use the appliance if it, the
blade foil or the shaving head are visibly damaged.
7
Only use the SW-030100EUL
power supply unit provided.
7
Caution! Always keep the power
adapter dry.
7
The appliance may only come into
contact with water once it is dis­connected from the power supply unit and the power supply unit is no longer in the socket.
7
Do not drop the appliance.
7
This appliance can be used by
children aged from 8 years and above and persons with re duced physical, sensory or mental ca­pabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Chil dren shall not play with the appliance. Clean ing and user maintenance shall not be made by children without supervision.
7
Do not open the appliance under
any circumstances. No warranty claims are accepted for damage caused by improper handling.
16ENGLISH
OVERVIEW ____________________________
Dear customer, Congratulations on the purchase of
your new GRUNDIG Lady Shaver LS 7140.
Please read the following user notes carefully to ensure you can enjoy your quality GRUNDIG product for many years to come.
Special features
7
Anti-bacterial titanium foil with two
longhair side trimmers for effective protection against skin irritations
7
The lady shaver is designed to
remove unwanted hair on arms, legs and also in especially sensitive areas such as the bikini line, armpits or the face
7
The lady shaver can be used on
wet skin
7
The cutting system can be cleaned
in water when removed.
7
Attachment comb for 5 mm trimming
length
A responsible approach!
GRUNDIG focusses on contractually agreed so­cial working conditions with fair wages for both
internal employees and suppliers, as well as on the efficient use of raw materials with continual waste reduction of several tonnes of plastic each year – and availability of at least 5 years for all accessories. For a future worth living. For a good reason. Grundig.
Controls
See the illustrations on page 3.
A
Cutting system (shaving foil with two side trimmers)
B
Shaving head
C
Release buttons
D
Switch for turning on and off
E
Charging indicator light
F
Power cord socket
G
Protective cap
Accessories
H
Hanging holder
I
Trimming comb (5 mm)
J
Power supply unit
K
Cleaning brush
17 ENGLISH
OPERATION ___________________________
Note
7
The appliance can be used on wet skin in battery mode and cleaned under the tap.
Rechargeable battery operation
When operating the appliance with the built-in nickel metal hydride battery, only use the power supply unit J sup­plied for charging.
Check if the type plate on the power supply unit J corresponds to your local mains supply.
1 Press the switch D, then push the
switch D downwards to turn off the appliance.
2 Plug the power supply unit J into
the wall socket first and then the power cord into the power cord socket F. – During the charging process, the
charging indicator light E lights up blue.
– Once the appliance is fully
charged, the charging indicator light E disappears.
Notes
7
Charge up the batteries completely (for at least 12 hours) before you first use them or if you have not used them for a long time.
7
The ambient temperature should be between 5 °C and 40 °C.
7
Once you have used the appliance, charging time is approx. 8 hours.
7
In its fully charged state, the ap­pliance can run for approx. 45 minutes. It is not advisable to charge the batteries after each use. Only charge the batteries when they are completely discharged. This increases their service life.
3 Pull the power cord out of the power
cord socket F and the power sup­ply unit J out of the wall socket.
18ENGLISH
OPERATION ___________________________
Mains operation
Only operate the appliance with the power supply unit J provided.
Check that the voltage indicated on the type plate of the power supply unit
J
corresponds to your local power
supply. The only way to disconnect the ap-
pliance from the power supply is to unplug the power supply unit J.
1 Plug the power supply unit J into
the wall socket.
2 Insert the power cord into the power
cord socket F on the appliance.
Caution
7
Never use the appliance in mains operation when you are beside a water connection.
Shaving
Note
7
If the hair you shave is longer than 10 mm, pre-trim the hair with the comb attachment I to a length of 5 mm for an optimal shaving per­formance.
1 Remove the plastic protective cap
G
.
Caution
7
The shaving foil and side trimmers for long hair must not be damaged. Replace any damaged parts before shaving.
2 Press the switch D, then push the
switch D upwards to turn on the appliance.
3 Stretch the skin with your free hand
to make the hairs stand upright.
19 ENGLISH
OPERATION ___________________________
4 Shave with slow, gentle movements
against the direction of hair growth. Hold the appliance at a 70° angle to your skin.
– Make sure that the shaving foil
and side trimmer are fully in con­tact with your skin.
Caution
7
Do not press too hard as you may damage the shaving foil.
5 After use, switch off the appliance
by pressing the switch D, then pushing the switch D downwards, clean the shaving head (see section "Cleaning the shaving head"), and put the protective cap G back on.
Armpits
1 When you shave the underarm
area, place one arm behind your head to stretch the skin.
2 Move the Lady Shaver gently over
the skin. – To achieve the best result, move
the appliance up and down and from left to right.
20ENGLISH
OPERATION ___________________________
Trimming
1 Attach the trimming comb I onto
the appliance.
2 Press the switch D, then push the
switch D upwards to turn on the appliance.
3 Move the appliance against the
direction of hair growth. – Make sure that the surface of the
comb is in full contact with the skin at all times.
Hints and Tips
7
In the case of thick or copious hair growth, which cannot be removed by just one shave, do one quick shave and then a more thorough second one.
7
Do not apply alcohol based-lotions to the skin directly before or after shaving. If you want, you can apply some baby powder after shaving.
7
Do not press the shaving head too hard onto the skin, as this has a neg­ative effect on shaving performance and may cause some skin irritation.
7
Basically, there is no difference in using the appliance on wet skin and using it on dry skin. You can simply choose which method you like best. But if you prefer to use the Lady Shaver dry, make sure that your skin is clean and completely dry.
21 ENGLISH
INFORMATION ________________________
General information
The device must be cleaned regu­larly so that you can continue to enjoy its top performance and opti­mum results. Clean the housing with a soft, damp cloth and mild deter­gent. Do not use household cleaning agents.
Caution
7
Never hold the appliance in water or any other liquid.
Detaching/attaching the shaving head
1 To detach the shaving head B,
press the release buttons C on both sides of the appliance and pull the shaving head B.
2 To attach the shaving head B push
it onto the appliance.
Note
7
Do not exert pressure on the shaving foil A to avoid damage.
Attaching/detaching at­tachments
1 To attach protective cap G or
trimming comb I, carefully put it onto the appliance. Make sure the recess of the comb is aligned with the front of the appliance.
22ENGLISH
INFORMATION ________________________
Cleaning the shaving head
1 Turn the appliance off and unplug
the cable. Pull the power supply unit
J
out of the mains socket.
2 Pull up the shaving head B out of
the attachment (see “Attaching / de­taching the shaving head” section).
3 To clean the shaving head B or the
cutting system A rinse them under running water or use the cleaning brush K.
4 Clean the bottom of the shaving
head B with the cleaning brush K supplied.
Note
7
Do not clean the appliance with water over shower temperature.
23 ENGLISH
INFORMATION ________________________
5 Rinse the hair off the appliance.
6 Make sure the appliance is com-
pletely dry before you reattach the cuting system A.
7 Insert the cutting system A in the
shaving head B again.
Storage
If you do not want to use the ap­pliance for a long period of time, please store it carefully.
7
Use the hanging holder H to hang the appliance securely and stable.
7
Make sure that it is switched off and completely dry.
7
Store the appliance and the power supply unit J in in a cool, dry place.
7
Make sure the appliance is kept out of reach of children.
24ENGLISH
INFORMATION ________________________
Environmental note
This product has been made from high-quality parts and materials, which can be re-used and are suit­able for recycling.
Therefore, do not dis­pose of the product with normal household waste at the end of its service life. Take it to a
collection point for the recycling of electrical and electronic equipment where the battery is taken out of the device and disposed sepa­rately. This is indicated by this sym­bol on the product, in the operating manual and on the packaging.
Please consult your local authorities to find out where the nearest collec­tion point is.
Help protect the environment by re­cycling used products.
Technical data
This product conforms to the European directives 2004/108/EC, 2006/95/
EC and 2009/125/EC.
Power Supply
Power supply unit SW-030100EUL
Input: 100 – 240 V ~, 50–60 Hz Output: 3.6 V DC 1000 mA Batteries: Nickel metal hydride
AAA, 2.4 V
Ni-MH
Technical and design modifications reserved.
25 ENGLISH
www.grundig.com 72011 908 1700 12/33
AUS GUTEM GRUND
Loading...