Grundig GUVCD2800 User Manual

Quick Start Guide

GUVCD2800 Integrated Digital TV

Install remote

control batteries

The message below will be displayed.

Press SELECT to start the search

for digital TV channels

Connect the aerial lead.

Once the search for digital

TV channels is complete the

message below will be

displayed. Press SELECT.

Plug in to the

mains supply

and switch on

the mains

socket.

Press the Power On/

Power On/Off

The search progression will be

displayed as shown below.

Off button on the

front of the TV.

Press any of the

numeric buttons,

P+ or P- to switch

the TV on.

To switch between

analogue and digital

TV channels press

the TV/DTV button.

The search progression will be

displayed as shown below.

When the warning message

is displayed press T

to highlight CONTINUE

and press SELECT.

Once the search is complete the

PROGRAM list will be briefly

displayed and the TV will tune to the

first channel found.

Refer to the manual

for detailed operating

information.

Helpline: 0870 920 1101

Connection Diagram

This diagram shows a typical configuration with
a recording device such as a DVD recorder or a

video cassette recorder.
Refer to the manual for how to set the EXT2
output to the digital TV channels so that they

can be recorded.