Grundig freeview GSTB4100FV User Manual
HIGH DEFINITION DIGITAL
SET TOP BOX
GSTB4100FV
The Gold Technical Support Line:1902 215 259
Personal Product Support
(Charges will apply at $2.95 per minute)
Safety Instructions
Always read the safety instructions carefully
Keep this Instruction Manual for future reference
Keep this device away from humidity
Lay this device on a reliable flat surface before setting it up
Do not stand it on soft furnishings
If any of the following situation arises, get the Set Top Box checked by
a service technician:
It has been exposed to moisture
It has been dropped and damaged
It has obvious sign of breakage
It has not been working well or you cannot get it to work according
to the Instruction Manual
Warning
To prevent the risk of electric shock, do not open the cover or the
back of the receiver.
Do not block the ventilation holes of the device. Leave appropriate
gap above and around it to allow for adequate ventilation.
Do not place the device in an unventilated cabinet or on top of a unit
which emits heat.
Copyright Statement
No part of this publication may be reproduced in any form by any means
without the prior written permission. Other trademarks or brand names
mentioned herein are trademarks or registered trademarks of their
respective companies.
Disclaimer
Information in this document is subject to change without notice.
The manufacturer does not make any representations or warranties
(implied or otherwise) regarding the accuracy and completeness of this
document and shall in no event be liable for any loss of profit or any
commercial damage, including but not limited to special, incidental,
consequential, or other damage.
Introduction
Thank you for buying this Grundig product, which is designed to give you
many years of trouble-free service.
You may already be familiar with using a similar unit, but please take time
to read these instructions. They are designed to familiarise you with the
unit's many features and to ensure you get the very best from your
purchase.
Safety is important
Your safety and the safety of others is important.
Please therefore, ensure you read the “Safety Instructions” before you
operate this unit.
Warranty
In the unlikely event that your product fails to work normally, please call
the below free phone number to discuss the problem with one of our
qualified service engineers.
Australia.
Grundig Warranty: 1800 509 394
New Zealand
Grundig Warranty: 0800 450 259
About the Set Top Box
This DVB-T TV Receiver allows you to access Freeview Digital TV
Channels and Radio Broadcasts on your TV set. Its digital reception
covers VHF & UHF band. Digital TV eliminates noise and interference
and offers high quality video and audio.
An easy to use on-screen installation guide is provided. In addition,
a fully featured Remote Control is included that offers you access
to every feature with a simple press of a button.
Main Features
with both Australian Standards and High Definition Video
Decoding MPEG-2 and H264/MPEG-4 AVC Formats
Update Receiver Operating Software by Over-The-Air Download
COFDM Demodulator
Automatic/Manual Channel Search
Channel Edit, Moving and Deletion
Parental Lock Control
EPG (Electronic Program Guide) and Teletext Function (where
available)
HDMI 1.3 Output
Multiple-Language OSD
Supports Multi-Subtitle
USB Port for Viewing JPEG Files, Music File and to Upgrade Software
Tuner RF In/Loop Through
Component / Video / Digital Audio via Coaxial Output
Full Function Remote Control
Compliant
Freeview Compliant
Package Contents
Before installation, please check the items of the package.
The package should contain the following items:
~ DVB-T TV Receiver x1 pc
~ Remote Control x1 pc
~ AAA Battery for the Remote Control x1 pair
~ Instruction Manual x1 pc
~ Composite RCA Cable x1 pc
Table of Contents
Front and Rear Panel ..........................................................................5
Remote Control ................................................................................6-7
Connecting to a Television................................................................... 8
Connecting to an Audio System............................................................. 9
Connecting to a DVD Recorder or VCR.................................................10
First Time Installation... ......................................................................11
Basic Operations..........................................................................
Troubleshooting
................................................................................19
11-19
Technical Specifications..................................................................... 20
Warranty........................................................................................... 21
Front and Rear Panel
1. Front panel
3
6
5
4
1 POWER BUTTON: Used to turn on/off the main power supply.
2 STANDBY INDICATOR: Used to visually show power state of the Set Top Box,
the LED will turn red if the Set Top Box enters standby mode.
3 REMOTE CONTROL SENSOR: Used to receive the signal from the Remote Control.
4 USB:
Data input from USB storage devices.
5 CHANNEL UP/DOWN: Used to change channels without using the Remote Control.
6 LED DISPLAY WINDOW: Used to display channel number.
2. Rear panel
N14119
GSTB4100FV
2009/07
HDMI OUT
7 8
AC 230V
~50Hz
POWER SUPPLY: AC 230V ~ 50Hz
Digital
LOOPRF
INRF
THROUGH
1 2
RF IN : This socket connects to your external Aerial.
1
RF LOOP THROUGH: This socket will bypass the RF signal to either your TV or
2
another video system.
COAXIAL: This socket connects to a Coaxial cable on your surround sound system.
3
VIDEO: This socket outputs composite video signal.
4
These sockets connect to your TV component input
5 COMPONENT VIDEO OUT:
Audio
Coaxial
3
Pb
Pr
VIDEO
Y R
COMPONENT VIDEO / AUDIO OUT
4
5
MAX POWER CONSUMPTION: 8 WATTS
Serial No.:
L
MADE IN PRC
WARRANTY: 1800 509 394 AUSTRALIA
WARRANTY: 0800 450 259 NEW ZEALAND
6
terminals.
AUDIO L/R: This socket outputs Analog Audio L/R signal.
6
HDMI
7
MAINS CABLE: This is used to connect to your main power supply.
8
High definition audio and video output used to connect to a HDMI device
5
Remote Control
1. STANDBY:
Switch the product to on or standby
2. 0-9 (Numeric Buttons): Selects a channel or setting
3. RECALL:
Used to switch between the last two viewed
channels
4. CH+/-: Selects the next or previous channels
5. PAUSE: Pauses media play
6. MENU: Turns on Main Menu
7. UP / DOWN: Navigates through the Menus
8. OK: Confirms an entry or selection. Displays the list of
channels
9. FAVOURITE: Turns on Favourite Menu
10. REV: Searches backwards during media play
.
11 FWD: Searches forwards during media play
12. REPEAT: Selects Repeat or turns off Repeat mode
13. DIGEST: Show grid in photo mode
14. MUTE: Mute or Restore Audio Output
15. INFO: Displays additional channel information
16. TTX: Displays Teletext Information
17. EPG: (Electronic Program Guide)Turns the
program guide on
18. AUDIO: Selects an Audio Language or Audio Mode
19. GOTO: Selects the play time of media
20. Vo l + / -: Increases or decreases volume
21. STOP: Stops media play
22. PLAY: Starts or resumes media play
23. EXIT: Exits the current Menu or returns to the
previous Menu
24. RIGHT / LEFT: Navigates through the Menus
25. TV/RADIO: Switches from TV function to Radio
function and from Radio to TV
26. NEXT: Skips to the next track during playing media
and skips to the next channel during playing DTV
27. PREV: Skips to the previous track during playing
media and skips to the previous channel during
playing DTV
28. SUBTITLE: Selects Subtitles Language
29. ZOOM: Enlarge the display in photo mode
30. COLOUR BUTTONS:
Operate different function in TEXT screen
STANDBY
MENU
FAVOURITE
DIGEST
MUTE
INFO
TTX
EPG
AUDIORECALL
EXIT
OK
27
28
29
30
6
Loading...