Grundig 48 VLX 8582 SP User manual [EN]

48 VLX 8582 SP

TABLE OF CONTENTS

---------------------------------------------------------------------------------

5 SET-UP AND SAFETY

7 GENERAL INFORMATION

7 Special features of your television set 8 Receiving digital stations 8 GRUNDIG SCR System 8 Important notes on environmental protection 8 Notes on still images

9 PACKING CONTENTS

9 Standart accessory 9 Optional accessory

10 CONNECTION/PREPARATION

10 Connecting the antenna and power corda 11 Setting up or hanging 12 Inserting batteries in the remote control

13 OVERVIEW

13 Connections on the television set 15 Control buttons on the TV 15 Multi-function switch 16 Remote control - main functions 17 Remote control - all functions

18 INITIAL SET-UP

18 Settings for connecting to the home network 18 Tuning channels 19 Initial set-up – overview 20 Arrange Initial set-up 24 Changing the Channel Editor for the

digital channels

28 PICTURE /SOUND SETTINGS

28 Picture settings 29 Restore default settings 29 Concluding the settings 30 Sound settings 31 Restore default settings 31 Concluding the settings

32 TV OPERATION – BASIC FUNCTIONS

32 Switching on and off 32 Selecting channels 32 Selecting stations from lists 32 Selecting AV channels 32 Adjusting the volume 32 Muting 32 Displaying information 33 Audio language 33 Subtitles 33 Zap function 33 PIP mode

34 TV OPERATION – ADDITIONAL FUNCTIONS

34 Sleep timer 34 Zoom function 34 Changing the picture format 35 Audio settings 35 Picture settings

36 ELECTRONIC TV GUIDE

36 Log on to the “RoviGuide™“ 36 The Electronic TV guide in Offline mode 37 The Electronic TV guide in Online mode

38 3D FUNCTION

38 Important information about 3D Function 38 Prepare 3D Function 38 Watching 3D content 39 3D Settings

41 HBBTV MODE

41 What is HbbTV? 42 Using HbbTV 42 Additional functions for video indexes 42 Deactivate and activate HbbTV 42 Deactivate and activate digital teletext

43 TELETEXT MODE

43 TOP text or FLOF text mode 43 Normal text mode 43 Additional functions

ENGLISH

TABLE OF CONTENTS

---------------------------------------------------------------------------------

44 USB RECORDING

44 Information on recording and playing

television programmes

44 Possible limitations when using an exter-

nal data medium 45 Connecting external data media 46 USB recording settings 47 Time shift – ″ Pausing” programmes 48 Recording TV programmes 48 One-touch programme recording 48 Recording a programme from the channel list 49 Programme setting for recording 50 Editing the timer 50 Deleting a timer 51 Playback 51 Deleting programmes from the recorded

files menu

52 USB OPERATION

52 File formats for USB operating 53 Connecting external data media 53 Removing the external data media 54 The file browser 54 Settings in the USB setup menu 56 Playback basic functions 57 Additional playback functions 58 Playing the video, music and image files

with home network connection 58 Selecting the digital media server 59 Playback 59 Other playback options

67 LANGUAGE SETTINGS

67 Changing the menu language 67 Changing the audio language 67 Changing the subtitle language 67 Changing the keyboard

language

68 ACCESSIBLE FUNCTIONS

68 Subtitle Mode 68 Audio description (audio subtitles)

69 ADVANCED SETTINGS

69 Auto sleep 69 Store logo view 69 Power LED brightness 70 Power save mode 70 Switching on/off weather information

71 TIMER FUNCTIONS

71 Sleep timer 71 On timer (Auto On) 72 Off timer (Auto Off)

73 PARENTAL SETTINGS

73 Parental Guidance 73 Locking the menus 74 Blocking the multifunction switch 74 Changing the PIN code 74 Blocking a television channel 75 Watching a blocked television channel 75 Resetting PIN code

60 SMART INTER@CTIVE TV 4.0 FEATURE

60 SMART Inter@ctive TV 4.0 internet ap-

plications 60 USB keyboard and mouse 60 Starting Smart Inter@ctive TV 61 Navigation and enetering text during

registration 61 Creating a Grundig Application Store account 62 Logging in with Grundig Application

Store account 63 Grundig Application Store 65 Navigation in the main menu 65 Playback and other options in the ap-

plications 66 Web browser menu 66 Web browser applications

76 DATE AND TIME SETTINGS

76 Auto tuning 76 Manual tuning

77 SOFTWARE OF THE DEVICE

77 Product information 77 Software update (OAD) 77 Software update (Internet) 77 Software update (USB)

78 ACCESSORIES

ENGLISH

TABLE OF CONTENTS

---------------------------------------------------------------------------------

79 RESET FUNCTIONS

79 Resetting the television to its original state 79 Deleting channel history

80 USING EXTERNAL DEVICES

80 DIGI LINK 80 The Digi Link functions of the television 81 Device Control 82 High definition – HD ready 82 Connection options 83 Connecting an external device 84 Using a DVD recorder, DVD player, video

recorder or set-top box 84 Headphones 85 Hi-fi system 86 Playing the audio signal via the HiFi

system 87 Cable screen share (MHL) 88 Wireless screen share (Liveshare)

89 OPERATION WITH COMMON INTERFACE

89 What is common interface? 89 Inserting the CA module 89 Access control for CA module and smart

cards

90 NETWORK SETUP

90 Network connection 90 Wired network 91 Wired network settings 93 Wireless network 93 Wireless network settings 97 Change TV Name 98 Connecting the TV to a “hidden” network

99 SETTING FURTHER CHANNELS

99 Searching for all digital channels from a

satellite automatically

100 Searching for digital channels from a

satellite manually on a transponder

101 Antenna settings and searching for digital

channels from a satellite automatically

102 Antenna settings, SCR system and search-

ing for digital channels from a satellite automatically

103 Antenna settings for DiSEqC 1.0/1.1 and

searching digital channels from a satellite

automatically 105 Motor antenna setup (DiSEqC 1.2) 106 Searching for digital channels from the

cable provider automatically 107 Searching for digital channels from the

cable provider manually 107 Searching for digital terrestrial TV chan-

nels automatically 108 Searching for digital terrestrial TV chan-

nels manually 109 Automatic service update 109 Tuning analogue television channels 111 Changing stored analogue channels 112 Displaying signal information

113 INFORMATION

113 Additional information 114 Service information for dealers 114 Notes for WLAN reception 115 Network interfaces 115 Disposing of the packaging 115 Environmental note 115 Explanation of the symbols which may be

present on back side of the television set 116 Troubleshooting

ENGLISH

118 GLOSSARY

123 INDEX

SET-UP AND SAFETY

-----------------------------------------------------------------------------------

About your TV set

With your TV set, you can receive and watch

digital TV programmes over DVB-S, DVB-T and DVB-C, along with analogue TV.

Many features of the TV set require an Inter-

net connection. The TV set is equipped with WLAN and a LAN port.

The TV set can record programmes. For this feature you need a USB storage device, such as an external hard drive (not included). Recorded programmes can only be played on the same TV set. After the TV st is repaired, it is possible that recorded programmes may no longer be able to be played back.

Intended use

The TV set is designed for use in dry rooms.

Use the TV set with the supplied stand or

a suitable VESA bracket.

The TV set is primarily intended for the play-

back of TV programmes, streaming content and audio/video material from external devices. Any other use is strictly prohibited.

It is not intended as an information display or

for predominant use as a computer monitor. If a still image or a non-full-format image is displayed for an extended period, visible traces may remain on the screen for some time.

This is not a defect that can be used as the

basis for a warranty claim.

Safety

WARNING

Risk of electrical accident

Do not open the TV set. Safety risk may arise

and also the guarantee of the product can be void if the television set is opened.

The TV set can only be operated with the

power cable or the AC/DC adapter supplied with the product.

Do not operate the TV set with a damaged

power cord/AC/DC adaptor (if supplied).

If the plug on the TV set has an earthing con-

tact, only insert the plug into a socket with an earthing contact.

Plug the TV set into the mains socket only after

you have connected the external devices and the antenna.

Protect the TV set from moisture. Do not place

any vessels filled with water (such as vases) on the TV.

Fire hazard

Do not cover the ventilation slots on the TV

set.

Always unplug the power plug and antenna

plug during a thunderstorm.

Keep candles or other open flames away

from the TV set.

Do not expose the batteries to extreme heat

such as sunshine, fire or the like.

Only use batteries of the same type (brand,

size, properties). Do not use used and new batteries together.

To prevent the spread of fire, keep candles or other open flames away from this product at all times.

ENGLISH

SET-UP AND SAFETY

-----------------------------------------------------------------------------------

WARNING

Injuries caused by falling TV set

Never place the TV set on an unstable surface. The TV set may fall, causing serious injury, possibly leading to death in isolated cases.

Observe the following precautions:

Only use the manufacturer’s recommended

cabinets or stands.

Only use furniture that can safely support the

TV set.

Make sure that the TV set does not protrude

beyond the dimensions of the furniture on which it is resting.

Do not place the TV set on tall furniture (such

as kitchen cabinets, bookshelves) without securely anchoring the furniture and TV set.

Do not place the TV set on fabric or other

materials located between the TV set and furniture.

Instruct children that there is danger associ-

ated with climbing on furniture when the TV set is to be reached.

NOTICE

Shortened service life due to high operating temperature

Do not place the TV set next to heating units

or in direct sunlight.

To ensure adequate ventilation, maintain

clearance of at least 10 cm around the TV set.

Discolouration of furniture due to rubber feet

Some furniture surfaces may discolour when

they come in contact with rubber. To protect furniture, you can place a sheet made of glass or plastic under the stand. Do not use textile underlays or mats such as doilies.

Environmental information

Do not dispose of batteries in

stores or public collection points. You help to protect the environment in this way.

Be sure to dispose of packaging materials

for your product separately according to the guidelines of local authorities so that they can be recycled in an environmentally safe manner.

If you are not using your TV set for a while, turn it to standby mode. In standby mode, the TV set uses very little energy (≤ 0.5 W). If you do not use the TV set for an extended period, turn it off with the power switch or unplug the power cord from the socket. If you turn off the device or disconnect it from the power supply, the switch-on timer and programmed recordings will not work.

Select a location for the TV set so that no

direct sunlight falls on the screen. This allows a lower backlight to be selected, which saves energy.

for electrical and electronic equipment.

the household waste. Used batteries must be returned to retail

Do not dispose of the product along with normal household waste at the end of its service life. Take it to a recycling centre

ENGLISH

GENERAL INFORMATION

Special features of your television set

Your television set enables you to receive and watch digital stations (via DVB-S, DVB-T and DVB-C), including the High Definition (HD) ones. At present, reception for these digital television stations in High Definition is only possible in some countries in Europe.

Although this television meets the current DVBS, DVB-T and DVB-C standards as of August 2012, its compatibility with future DVB-S digital satellite broadcasts, DVB-T digital terrestrial broadcasts and DVB-C digital cable broadcasts is not guaranteed.

This television can receive and process all analogue and all unencrypted digital stations. This television set has an integrated digital and analogue receiver. The digital receiver unit converts the signals from digital stations to provide outstanding audio and picture quality.

The twin-triple tuner enables PIP function so you can view one TV programme in the main picture and another in an inset picture.

You can now also view one TV programme

while recording another programme.

The TV guide (only for digital stations) tells you of any schedule changes at short notice, and provides an overview of all the stations’ schedules for the next few days. Quite a lot of content such as programme data, channel logos, players, images, fragments, etc. can be reached via the internet through internet connection thanks to the online feature of the TV guide. Detailed information for each channel - if provided by the broadcasting channel - is included in the electronic programme guide.

You can connect various data media, for example, an external hard drive, a USB memory stick or a digital camera to the USB sockets. Using the file browser, you can then select and play the file formats you want (for example, MP4, MP3 or JPEG data).

With the Time Shift function, you can easily stop and resume a programme with the remote control in a fast and simple way. Programme is recorded to the external data medium.

-------------------------------------------------------------------

You can record any digital TV channel you have chosen, if no limitation has been im-

posed by the broadcaster. TV channel is transformed by your television and saved to a USB external data medium. You can recall and play saved programs from the archive. While a recording is in progress, you can select and watch another recording from the archive. For detailed information about saving and playing TV programs, please see page 44.

With the 3D function and 3D glasses of your

TV, you can watch 3D movies in the comfort

of your home with the reality of a theater.

LED technology has been used in this televi-

sion to provide you with the best experience

in 3D feature. To join the 3D world, just put on

the Grundig 3D glasses.

SMART inter@ctive TV 4.0 feature provides

your TV with Internet applications when your

TV is connected to Internet. You can surf

through the web pages, visit popular video

and photo sharing sites as well as social net-

works with these applications.

Wireless USB keyboard and mouse support in

the Web browsing of your television facilitates

surfing through the internet pages for the user.

DLNA feature allows you to use a wired or

wireless (with wireless USN network device)

local network to access your content that

were recorded with DLNA compatible devices

we use at our daily lives such as a PC, mobile

phone or NAS (Network Attached Storage)

which are operated as DMS (Digital Medial

Server). While watching TV, you can play any

content you like at any time by using DMC

applications on your mobile device or PC

without starting DLNA application.

A DLNA compatible device such as a PC,

mobile phone, NAS or a NAS-like (Network

attached storage) device which operates as

a DMS (Digital Media Server) is required in

order to use home network.

ENGLISH

GENERAL INFORMATION

-------------------------------------------------------------------

Receiving digital stations

To receive digital satellite stations (DVB-S) you need a satellite antenna.

To receive digital stations (DVB-T) you need a digital rooftop or indoor antenna (passive or active indoor antenna with its own power supply).

The antenna cable of the cable TV network that broadcast in DVB-C must be plugged into TV in order to receive the DVB-C broadcasts.

Unlike analogue broadcasting, not every station has its own transmission frequency. Instead, several stations are grouped into what are known as bouquets on a regional or national level.

You can find the current transmission information on teletext from various broadcasters, or look in a TV guide or on the Internet.

Various digital television stations from private broadcasters are encrypted (DVB-S, DVB-T and DVB-C). Watching these stations and the recording and playback functions are only possible with the appropriate CI module and a SmartCard. Ask your specialist dealer.

GRUNDIG SCR System

Your TV supports SCR system (Single Channel Router). With SCR satellite system, several users can individually receive all signals from the satellite simultaneously.

Important notes on environmental protection

Those items mentioned below will help you reduce the consumption of natural resources as well as save your money by reducing electricity bills.

If you will not be using the TV set for several

days, it should be disconnected from the

mains for environmental and safety reasons.

TV will not consume energy in this condition.

If the TV set has main switch, it will be enough

to turn the TV off via main switch. TV will

reduce energy consumption almost to Zero

Watt.

TV consumes less energy on stand by mode.

However, some TV sets may have features

such as on timer, that require the TV set to be

left in standby to work correctly.

TV consumes less energy when brightness is

reduced.

Notes on still images

Watching the same image for a long time on the screen may cause a still image remain feebly on the background. Feeble image(s) on the background is originated from LCD/LED technology and does not require any action under guarantee. To avoid such cases and/or minimize the impact, you may observe the tips below.

Do not allow the same TV channel to stay on

the screen for a very long time. Channel logos

may cause this situation.

Do not allow the images, which are not full

screen, to constantly stay on the screen; if not

streamed in full screen format by the broad-

caster, you can convert the images to full

screen by changing picture formats.

Higher brightness and/or contrast values will

lead this impact to appear faster; therefore,

you are recommended to watch your TV in

the lowest brightness and contrast levels.

ENGLISH

PACKING CONTENTS

-------------------------------------------------------------------------------

MAIN

SUB

Standart accessory

1 TV 2 Stand 3 Remote control 4 Batteries for remote controls 5 Screws and mounting instructions for stand 6 Brief Instruction

Optional accessory

Easy-Use Remote Control Batteries for Easy-Use remote controls Cleaning cloth

ENGLISH

CONNECTION/PREPARATION

Connecting the antenna and power corda

-----------------------------------------------------

1a To receive digital satellite channels (DVB-S),

connect the satellite antenna cable to the antenna socket SATELLITE MAIN on the television set;

1b To receive digital satellite programmes

(DVB-S) for the PIP function and the advanced recording function for TV programmes, two cables with the satellite signals are needed. Connect the second cable to the SATELLITE SUB antenna socket on the TV.

and / or

2a To receive terrestrial digital broadcasters

(DVB-T) connect the cable for the rooftop or indoor antenna (passive or active indoor antenna with its own power supply) to the antenna socket ANT IN on the television set;

2b To receive digital cable channels (DVB-C)

connect the cable for the rooftop antenna to the antenna socket ANT IN on the television set;

Optic Out

SCART / S-VHS / COMPONENT

LAN

USB 3

SERVICE

SATELLITE

ONLY

MAIN

HDMI4 (ARC)HDMI3

SUB

ANT IN

2c To receive analogue TV channels, connect

the cable for the rooftop antenna to the antenna socket ANT IN on the television set.

Note:

When connecting an indoor antenna you may have to try it out at different positions until you get the best reception.

3 Plug the power cord into the wall socket.

Note:

Only plug the device into the mains socket after you have connected the external devices and the antenna.

Do not use an adapter plug or extension cable which does not meet the applicable safety standards. Do not make changes on the power cord.

ENGLISH

CONNECTION/PREPARATION

Setting up or hanging

Select a location so that no direct sunlight falls on the screen.

Setting up with stand

To mount the stand, refer to the installation instructions included.

Place the television set on a hard, level surface.

Preparing for mounting on the VESA bracket

You will need:

A pair of scissors,

A crosstip screwdriver.

Follow the installation instructions for the VESA bracket.Place the television set in the film on a smooth surface with the screen facing down.

1 Cut open the film on the back side using the

scissors.

2 Connect the required cables to the connec-

tors on the television set. See the “Connection/Preparation” section in this manual.

3 Tie the cables so they do not hang down

onto the floor.

4 Screw the VESA bracket onto the television

set and mount it according to its installation instructions.

-----------------------------------------------------

USB 3

LAN

SERVICE

Optic Out

SATELLITE

ONLY

MAIN

HDMI4 (ARC)HDMI3

SUB

VESA

SCART / S-VHS / COMPONENT

ANT IN

ENGLISH

CONNECTION/PREPARATION

-----------------------------------------------------

Inserting batteries in the remote control

1 Open the battery compartment by removing

the lid.

2 Insert the batteries (2 x 1.5 V micro; for

example R03 or AAA). Observe the polarity (marked on the base of the battery compartment).

3 Close the battery compartment.

Note:

If the television set no longer reacts properly to remote control commands, the batteries may be flat. Be sure to remove the exhausted batteries from the battery compartment.

The manufacturer accepts no liability for damage resulting from used batteries.

Environmental note

shall not be treated as household waste. On certain batteries this symbol might be used in combination with a chemical symbol. The chemical symbols for mercury (Hg) or lead (Pb) are added if the battery contains more than 0.0005% mercury or 0.004% lead.

Batteries, including those which contain no

heavy metal, may not be disposed of with household waste. Please dispose of used batteries in an environmentally sound manner.

Find out about the legal regulations which

apply in your area.

This symbol on the battery or on the packaging indicates that the battery provided with this product

ENGLISH

OVERVIEW

--------------------------------------------------------------------------------------------------------------

Connections on the television set

LAN

Optic Out

SCART / S-VHS / COMPONENT

SERVICE

LAN

SERVICE

Optic Out

ONLY

SCART / S-VHS / COMPONENT

ONLY

USB 3

SATELLITE

MAIN

HDMI4 (ARC)HDMI3

SUB

ANT IN

USB 3

SATELLITE

MAIN

HDMI4 (ARC)HDMI3

SUB

ANT IN

ENGLISH

OVERVIEW

--------------------------------------------------------------------------------------------------------------

Optic Out Audio output sockets (opti-

cal) for PCM/Dolby Digital signals.

It is for digital multichannel

audio/video amplifier or AV receiver connections.

LAN Network cable connection

socket.

Service Only Service only.

SCART / S-VHS / COMPONENT Euro/AV socket (CVBS

signal, RGB signal);

video signal input for

S-Video camera (with ScartS-VHS converter).

Video signal input (YUV

signal with Scart-YUV converter).

USB 3 USB Harddisk socket for

external data medium and PVR function; connection for wireless keyboard, mouse.

HDMI4 (ARC) HDMI socket, audio/video

signal input (HDMI).

HDMI3 HDMI socket, audio/video

signal input (HDMI).

SATELLITE MAIN Satellite antenna socket. SATELLITE SUB Antenna socket for the sec-

ond satellite signal (DVB-S).

ANT IN Antenna socket.

U Headphone connection

(3.5 mm jack); external audio output (with headphone-RCA converter).

CI1 Common interface slot. CI2 Common interface slot. USB1 USB Harddisk socket for

external data medium and PVR function; connection for wireless keyboard, mouse.

USB2 USB socket for external

data medium and PVR function; connection for wireless keyboard, mouse.

HDMI1 (MHL) HDMI socket, audio/video

signal input (HDMI).

HDMI2 HDMI socket, audio/video

signal input (HDMI).

ENGLISH

OVERVIEW

--------------------------------------------------------------------------------------------------------------

Control buttons on the TV

O/I Power switch, switches the television into

standby mode and off.

Note:

There shall not be any obstacle around Power switch and shall remain readiliy operable.

Multi-function switch

Switching on the TV

1 Press or rock the multi-function switch.

Fernsehgerät in Bereitschaft schalten

1 Turning the TV to standby. 2 Rock until “Switch to standby” is selected. 3 Press.

Adjusting the volume or changing the station

1 Press the multi-function switch. 2 Rock to select the required function. 3 Press. 4 Rocking now performs the selected function.

ENGLISH

OVERVIEW

--------------------------------------------------------------------------------------------------------------

Remote control - main functions

Switches on from standby

mode;

selects channels directly.

Selects the channel list

(»ALL«, »FAV 1« to

»FAV 4«).

Opens the electronic TV

guide.

Displays information.

Opens the menu.

Opens the channel list.

Opens the Tools menu.

Adjusts the volume.

Turns volume on/off (mute).

Record, playback, pause or

stop (only digital television

channels);

teletext on half screen.

Turns on and off the television set (stand-by).

Switches between teletext and TV modes.

Functions according to the screen help, HbbTV.

Exits menu and applications.

Zapping function;

switches the menus back one menu level.

Opens MyApps menu.

Signal source

Switches on from standby; selects stations step by step

PIP function on/off.

Next/previous image/ chapter, next/previous track.

Opens 3D menu.

Opens Netflix applications

Cursor Control

Moves the cursor up and down in the menus.

Moves the cursor left/right in menus.

Opens channel list; activates various functions.

ENGLISH

Select subtitle

Opens Media Player menu.

Select audio channel

OVERVIEW

--------------------------------------------------------------------------------------------------------------

Remote control - all functions

(red) Selects a page in teletext mode;



(green) selects/activates various functions



(yellow) in menus.



(blue)



5 Switches to double character size

6 Updates a page in teletext mode;

Page hold in teletext mode;

Show answers in teletext mode;

Starts recording (in digital TV op-

8 Starts playback in the external

in teletext mode; selects the previous track/previous picture in the Media Player.

selects the next track/next picture in the Media Player.

starts the reverse picture search in the Media Player.

starts the forward picture search in the Media Player.

eration, recording only via external data media).

data media; Starts playback in the DLNA menu.

! Time shift during live signal (in digi-

tal TV operation, only via external data media); pauses the file executed on the external data media; pauses the file executed on the DLNA menu.

7 Selects the split screen function in

teletext mode; ends playback in the file browser; ends recording or playback in the PVR mode; stops the file executed on the DLNA menu.

Selects different audio language

(in digital TV operation).

Selects different subtitles (in digital

TV operation).

Note:

Your TV supports remote control feature for

Apple iPhones, Windows mobile phones and Android phones.

Depending on the features of your TV, you

may control your TV by your phone after downloading the free »GRUNDIG TV Remote« application from Apple App. Store or Google Play (Android Market).

ENGLISH

INITIAL SET-UP

---------------------------------------------------------------------------------------------------

The television set is fitted with an “installation assistant”, which guides you step by step through the basic settings.

Using the screen dialogue, the user guide enables supposedly complex settings and data entries to be presented simply and clearly for everybody. Pages and dialogue items appear on the screen, which identify the subsequent and likely operating steps. To support this, you will also see the required button symbols of the remote control.

The basic settings in detail: – language selection – country selection; – choice of user mode; – location selection; – accessories selection; – network settings (if desired); – Station settings (DVB-S, DVB-T, DVB-C and

analogue channels).

The detailed settings can be found on pages 20 and 23.

Settings for connecting to the home network

Depending on the connection to the home network, you connect your television to the home network: – via a LAN connection or – without cable via WLAN

There are two options with the LAN-connection:

Automatic connection

all data regarding connection settings (»IP Ad-

dress«, »Netmask«, »Gateway« and »DNS«) are obtained from modem automatically.

Manual connection

all data regarding connection settings (»IP Ad-

dress«, »Netmask«, »Gateway« and »DNS«) must be configured manually.

There are various options when using WLAN:

Automatic connection

all data regarding connection settings (»IP Ad-

dress«, »Netmask«, »Gateway« and »DNS«) are obtained from modem automatically.

Depending on the router, you can use the fol-

lowing options:

– Option “WPS-PBC” (Push Button Configura-

tion); – Connecting with a WPS PIN; – Connecting by entering the network pass-

word.

Manual connection

all data regarding connection settings (»IP Ad-

dress«, »Netmask«, »Gateway« and »DNS«) must be configured manually.

Tuning channels

Depending on the type of antenna connected, you can decide which channels you would like the television to search for.

DVB-S – Tunes digital channels from the

satellite, from page 22.

You have two options for this search:

–

the basic installation which presets a stan-

dard selection, e.g. the satellite Astra 19.2°

East; you need only start the search; –

the professional installation, which allows

you to make all required settings and set

parameters for your receiver system.

DVB-C – For setting up digital cable channels

see page 22.

DVB-T – For setting up digital terrestrial

channels see page 23. Searching for Analog television channels,

see "Setting further channels" section on page

109 .

Note:

See “Setting further channels”" section starting from page 99 for more information on digital television channel settings.

ENGLISH

INITIAL SET-UP

---------------------------------------------------------------------------------------------------

Initial set-up – overview

Select language (page 20, step 3)

Select country (page 20, step 5)

Select location and accessories (page 20, step 7 - 10)

Network setup (page 21, step 12)

Select mode (page 20, step 6)

Wired

(page 21, step 12)

Auto

(page 21, step 12)

DVB-T

(page 23, step 35)

Auto

(page 22, step 35)

Manually

(chapter page 92)

Setting TV channels (page 22, step 26)

Manually

(chapter page 108)

Channel Editor (page 24)

Wireless

(page 21, step 17)

Auto

(page 21, step 17)

DVB-C

(page 22, step 30)

Auto

(page 22, step 30)

Manually

(Chapter page 96)

Manually

(chapter page 107)

Wireless WPS

(chapter page 94)

Button

(Chapter page 94)

DVB-S

(page 22, step 26)

Auto

(page 22 step 26)

(Chapter page 94)

Manually

(chapter page 100)

ENGLISH

INITIAL SET-UP

---------------------------------------------------------------------------------------------------

Arrange Initial set-up

1 Switch the television set to standby with the

power switch »O/I«.

2 Switch on the television set from standby

– Menu Language menu appears when the

3 Select the menu language with »

– »Welcome« menu appears.

4 Step-by-step installation will be made to be

5 Select the country in which the television

– »User Mode« menu appears, the option

6 Confirm the option »Home Mode« with

or select the option »Enhanced« with »

– »Home Mode« contains preconfigured

– »Enhanced« – if you will use the television

8«, »1…0«, »P+« or »P–«.

with »

device is switched on for the first time.

Smart Inter@ctive 4.0

Please select your desired language

Menu Language

Česky Dansk Deutsch English Espanol

Hrvatski Italiano Magyar Nederlands Norsk Polski Português

Pyccкий Româneşte Slovenščina Eesti Suomi Svenska Бългaрски

Slovenčina Lietuviu Türkçe

Navigation Between Items

English

Select

Eλληvıκά

Français

Help:

If the »Menu Language« menu does not appear on the screen, make the setting by following the instructions on returning the television to its factory settings on page 79.

«, »>«,

« or »Λ« and press »OK« to confirm.

able to use the television. Press »OK« to start the installation.

set is operated with » and press »OK« to confirm.

«, »>«, »V« or »Λ«

»Home Mode« is selected.

»OK«;

« and press »OK« to confirm.

TV settings that provide energy savings conforming EUP.

for a demo presentation, increased image and volume settings are used in this mode. Increased mode consumes more energy.

« or

7 Select the required option »Stand« or »Wall-

mounted« with »

« or »Λ«.

Note:

The information how to place the television

set is important for the automatic audio settings.

8 Confirm setting with »OK«.

– The »Summary« menu will be displayed.

9 Select the next operating step with »



(blue). – The »Accessories« menu will be dis-

played.

10 If an accessory is used for the television and

it has already been connected, carry out the

required settings in this menu. Select accessory with »

select setting with »

11 Select the next operating step with »

« or »>«.

« or »Λ« and



(blue).

Note:

If you want to connect your television to the

home network, – continue at point 12 for an automatic

LAN connection, or

– continue at point 17 for an automatic

WLAN connection.

Note:

If connecting to a home network is not nec-

essary, skip the setting using »



« (blue).

Continue settings at point. 26, 30 or 35.

ENGLISH

INITIAL SET-UP

---------------------------------------------------------------------------------------------------

Connecting to a home network with a LAN cable

12 Confirm »Change Connection Type« with

»OK«.

13 Select the option »Wired« with »

« or »Λ«

and press »OK« to confirm.

Note:

The settings for a manual LAN connection

are on page 92.

14 Press »« (red) to select »Connect« option to

establish modem connection.

– »Connecting ... Please wait« message

will be displayed, and if the connection is established »Connection To Gateway: Success« messages will be displayed.

15 Press »« (green) to check the performed

settings and also if the local network and internet connection has been established.

– »Testing ... Please wait« message will

be displayed, and if the connection is established »Connection To Gateway: Success«, »Internet Connection: Success« messages will be displayed.

16 To switch to »Source« menu press »



(blue).

Note:

Continue searching for TV channels with: – point 26 for DVB-S reception; – point 30 for DVB-C reception; – point 35 for DVB-T reception.

Connecting automatically by entering the network password

17 Confirm »Change Connection Type« with

»OK«.

18 Select the option »Wireless« with »

« and press »OK« to confirm.

« or

19 Confirm the message »Do you want to turn

on Wi-Fi?« select »Yes« with » press »OK« to confirm.

« or »>« and

20 Select the line »Select Access Point« with

« or »Λ« and press »OK« to confirm.

– »Select Access Point« menu appears and

available wireless networks are scanned and displayed in the menu.

21 Select the network that you want to con-

nect with »

« or »Λ« and press »OK« to

confirm.

– Wireless connection password screen is

displayed.

22 Select the required character with »

«, »<« or »>« and move to the next

«,

character with »OK«.

– Using »Shift« ➡ »OK«, you can switch

between uppercase letters / numbers and lowercase letters / special characters.

– Select »Del« to delete the character

entered and press »OK« to confirm.

23 Confirm the password with »« (green).

– »Connecting ... Please wait« message

will be displayed, and if the connection is established »Connection To Gateway: Success« messages will be displayed.

24 Press »« (green) to check the performed

settings and also if the local network and internet connection has been established.

– »Testing ... Please wait« message will

be displayed, and if the connection is established »Connection To Gateway: Success«, »Internet Connection: Success« messages will be displayed.

25 To switch to »Source Setup« menu press

« (blue).



Note:

Continue searching for TV channels with: – point 26 for DVB-S reception; – point 30 for DVB-C reception; – point 35 for DVB-T reception.

ENGLISH

INITIAL SET-UP

---------------------------------------------------------------------------------------------------

Searching television channels with satellite signal (DVB-S)

26 Select the option »Satellite (DVB-S/S2)«

with »

« or »Λ« and press »OK« to

confirm.

– The satellite Astra 19.2° East is preset.

27 Confirm the push button »Continue« with

« (blue).



Notes:

If a second digital satellite signal is con-

nected to SATELLITE SUB input then »Satellite Input« option should be selected as »Dual«.

Select the Channel Type.

Press »

« or »Λ« to select whether you want to search for only digital channels (Digital) or only radio channels (Radio) or both (Digital + Radio) and press »OK« to select and mark or unmark the »Digital« and/or »Radio« items.

Select Scan Mode.

To select whether you want to search for

only free digital television channels (Free), only scrambled digital television channels (Scrambled) or both (Free + Scrambled), press »

« or »Λ« and press »OK« to select and mark or unmark the »Free« and/ or »Scrambled« items.

28 Press »« (red) to start searching.

– »Digital Searching« menu appears and

the scan for TV channels begins.

– The scan is complete as soon as the mes-

sage »Search is completed!« appears.

29 Select the »Channel Editor« with »OK«.

Tuning cable digital television channels (DVB-C)

Note:

No additional setting is necessary for the

“second tuner”.

30 Select the option »Cable (DVB-C)« with

« or »Λ« and press »OK« to confirm.

31 Select the line »Scan Type« with »

«.

Select the option »Quick« or »Full« with »

or »

«.

– »Quick« scanning function sets the chan-

« or

nels according to the cable operator information in the broadcasting signal.

– »Full« scan function scans the entire fre-

quency range selected. With this search option, search can take a long time. This search type is recommended. Some cable providers do not support »Quick« scan.

Note:

You can speed up the search. To do this, frequency and network ID information are required. You may get this data from your cable operator or find it in the Internet forums.

32 Confirm the push button »Continue« with

« (blue).



Note:

Perform Channel Type selection. Press

« or »Λ« to select whether you want to search for only digital channels (Digital), only Analog channels (Analog) or both (Digital + Analog) and press »OK« to select and mark or unmark the »Digital« and »Analog« items.

33 Press »« (red) to start searching.

– The »Digital or Analog Searching« menu

appears, and the search for TV channels begins.

– The scan is complete as soon as the

»Search is completed!« appears.

34 Select the »Channel Editor« with »OK«.

ENGLISH

INITIAL SET-UP

---------------------------------------------------------------------------------------------------

Tuning terrestrial digital television channels (DVB-T)

Note:

No additional setting is necessary for the

“second tuner”.

35 Select the option »Air (DVB-T/T2)« with

« or »Λ« and press »OK« to confirm.

Important:

The antenna power supply (5V ) may only be switched on if the antenna is an active indoor antenna with a signal amplifier and it is not already supplied with a voltage via a mains plug (or similar supply). Otherwise you may cause a short circuit and irreparably damage your antenna.

36 Select the line »Active Antenna Power« with

« or »Λ«.

Switch on the antenna power supply for the

antenna with »

37 Select the line »Next Page« with »

« and press »OK« to confirm.

« or »>« (»On«).

« or

Note:

Perform Channel Type selection. Press

38 Press »« (red) to start searching.

– The »Digital or Analog Searching« menu

appears, and the search for TV channels begins.

– The scan is complete as soon as the

»Search is completed!« appears.

39 Select the »Channel Editor« with »OK«.

ENGLISH

INITIAL SET-UP

---------------------------------------------------------------------------------------------------

Changing the Channel Editor for the digital channels

Channels found at the end of the search are stored in the »Channel Editor«.

You can delete channels which are not required from the programe table, you can change the order of channels within the programe table and lock individual channels (Parental control).

You can also add channels to the favourites list; in addition, you can change the order of channels within the favourites list.

In Channel Editor, press »P+« to switch the channel list to the next page, press »P–« to switch it back to the previous page.

To perform searching in the Channel Editor menu by Channel names, press »« (red).

To display the channels in the Channel Editor menu by Antenna Type, press »« (green), »

« or »Λ« and »OK«.

To use filters and tools in the Channel Editor menu, press »

« (yellow).



Opening the Programme Table

1 Open the menu with »MENU«.

2 Select the »Settings« menu with »

« or »>« and press »OK« to confirm.

3 Select the option »Source« with »

and press »

« to confirm.

«, »Λ«,

« or »<«

4 Select the line »Channel Editor« with »

and press »OK« to confirm.

– »Channel Editor« menu is displayed.

Important:

Programme table and favourite lists are stored separately for all sources (satellite, cable and air).

Programme table of the current source will be displayed when you select programme table.

Notes:

A Cl module and smart card is required to watch the channel if there is a »

« sign next to the channel name in Programme Table.

As the recorded data channels are not displayed in the channel list, number of channels displayed in the Channel list may be less than 6000

1 Das Erste

Channel Editor

1 Das Erste

DTV

6 24

DTV

11 HD1

DTV

16 TV Sport

DTV

Search for Channels Antenna Type Tools Tune Channel Select

ENGLISH

2 ZDF

DTV

7 HD Sports

DTV

12 Life

DTV

17 SAT8

DTV

3 SAT1

DTV

8 HD Test

DTV

13 Film

DTV

18 SKY

DTV

4 N24

DTV

8 SAT

DTV

12 Promo

DTV

19 TV6

DTV

Tuesday

xx xxx xxxx

Satellite All

5 SAT3

DTV

10 RTL

DTV

15 Sport1

DTV

20 TV5

DTV

INITIAL SET-UP

---------------------------------------------------------------------------------------------------

Searching channels by name in the Channel Editor

While arranging the channels in the Channel Editor, you can search and select the channel name by the first three characters.

1 In the »Channel Editor« menu, select the

search mode by pressing »« (red).

2 Select the first character of the channel

name you want to search with » »

« or »>« and press »OK« to confirm.

Repeat the entry for the next characters. – Channels found will be listed on the right

side of the screen.

3 With »

Note:

4 To return to the previous menu, press

5 To exit the »Channel Editor« menu, press

« switch to result section, select the

channel you are searching with » »

«, and highlight this with »OK«.

To change the place of, delete or add the channels to favorites lists, continue reading the relevant section.

»BACK <«.

»EXIT«.

«, »Λ«,

« or

Deleting channels in the Channel Editor

1 In the »Channel Editor« menu, select the

channel(s) you want to delete with » »

«, »<« or »>«, and highlight the channel

by pressing »OK«.

– Channel is marked with »✔«.

2 Press »

– »Tools« menu is displayed.

3 Select the line »Delete« with »

and press »OK« to confirm.

4 To confirm deletion process, select the op-

tion »OK« with » or to cancel deletion process, select the option

»No« with »

confirm.

5 To exit the »Channel Editor« menu, press

»EXIT«.

« (yellow).



« or »>«;

« or »>« and press »OK« to

« or »Λ«

«,

Moving the channels in the channel organizer to different channel positions

1 In the »Channel Editor« menu, select the

channel(s) you want to move with » »

«, »<« or »>«, and highlight the televi-

sion channel by pressing »OK«.

– Channel is marked with »✔«.

2 Press »

– »Tools« menu is displayed.

3 Select the line »Move« with »

and press »OK« to confirm.

Notes:

In case of changing the order of the channels, channel numbers sent by the broadcaster will be changed.

If more than one channel is selected for moving, channels will be moved one after the other according to the selection order of channels.

4 Select the new place of the channel with

confirm.

5 To exit the »Channel Editor« menu, press

»EXIT«.

« (yellow).



«, »Λ«, »<« or »>« and press »OK« to

« or »Λ«

«,

Displaying channels in the Channel Editor by antenna type

If you have more than one antenna type, you can display channels in the Channel Editor by antenna type.

1 To display the channels in the »Channel

Editor« menu by antenna type, press »« (green).

2 Select »Air«, »Cable« or »Satellite« with

« or »Λ« and press »OK«.

– Television will switch to the antenna sys-

tem you have selected and channels will be displayed.

3 To exit the »Channel Editor« menu, press

»EXIT«.

ENGLISH

INITIAL SET-UP

---------------------------------------------------------------------------------------------------

Sequencing channels in the Channel Editor

You can sequence the channels in the Channel Editor according to different criteria such as TV, radio or scrambled / unscrambled.

1 To sequence the channels according to dif-

ferent criteria in the »Channel Editor« menu,

press »

« (yellow).



2 Select the sequencing criteria you want with

« or »Λ« and press »OK« to confirm.

– Channels will be displayed in the »Chan-

nel Editor« menu by the criteria you have selected.

3 To exit the »Channel Editor« menu, press

»EXIT«.

Creating a list of favourites

You can select your favourite channels and save them in up to four lists (FAV1 to FAV4).

Note:

Favourite lists must be created separately for all sources (satellite, cable and air).

After created the favourite list, press »FAV« to select the favorite list.

1 In the »Channel Editor« menu, select the

channel(s) you want to add in the favor-

ites list with »

«, »Λ«, »<« or »>«, and highlight the television channel by pressing »OK«.

– Channel is marked with »✔«.

2 Press »

« (yellow).



– »Tools« menu is displayed.

3 Select the line »Add to Fav.« with »

« and press »OK« to confirm.

« or

–»Add to Fav.« menu is displayed.

4 Select the favorite list you want to add the

selected channels with »

« or »Λ« and

store with »OK«.

– The channels are marked in the Channel

Editor with »❶«, »❷«, »❸« or »❹«.

– You can add the same channel in more

than one favourites list.

– Each favourite list can contain maximum

255 channels.

Notes:

You can delete channels from the favourites list. Press » list the channel is in with »

« (yellow), select the favorites



« or »Λ« and press »OK« to confirm. Select the channel(s) you want to delete with »

«, »Λ«, »<« or »>«, and highlight the channel by pressing »OK«. Press » »Remove from Fav.« with »

« (yellow) and select the line



«, »Λ« and

confirm with »OK«.

When a channel stored in the favourite channel list is deleted channel order in the favourite list is updated.

5 To exit the »Channel Editor« menu, press

»EXIT«.

Sorting channels in the favorites list

You can change the channel sorting in the favorites list.

1 To select favorites list in the »Channel Edi-

tor« press »

« (yellow).



2 Select the favorites list you want to sort with

« or »Λ« and press »OK« to confirm.

3 Select the channel(s) you want to move with

«, »Λ«, »<« or »>«, and highlight the

» television channel by pressing »OK«.

– Channel is marked with »✔«.

4 Press »

« (yellow).



– »Tools« menu is displayed.

5 Select the line »Move« with »

« or »Λ«

and press »OK« to confirm.

Note:

If more than one channel is selected for moving, channels will be moved one after the other according to the selection order of channels.

6 Select the new place of the channel with

«, »Λ«, »<« or »>« and press »OK« to

confirm.

7 To exit the »Channel Editor« menu, press

»EXIT«.

ENGLISH

INITIAL SET-UP

---------------------------------------------------------------------------------------------------

Enter own names for the favourites lists (max. 6 characters)

You can rename all favorites lists.

1 To recall favorites list menu when no menu is

opened on the screen, press »FAV«.

2 Select the favorites list you want to rename

– Virtual keyboard will be displayed.

3 To delete the current name step by step,

4 Select the required character/number with

Repeat the same process for all characters/

5 To save the new name with »« (green). 6 Press »EXIT« to end the setting.

« or »Λ« and press »

with » button.

press »« (red).

«, »Λ«, »<« or »>« and move to the

» next character with »OK«.

numbers.

Note:

Using »Shift« ➡ »OK«, you can switch between uppercase letters / numbers and lowercase letters / special characters.



« (blue)

Renaming AV channels

You can rename AV channels according to the device you have connected. For example, for a PC which you have connected to HDMI1 source of TV with HDMI cable, you can name the source as PC.

1 Open »Input Source« menu with » 2 Select the AV source you will rename with

« or »>« and press »

– Rename menu is displayed.

3 Press »OK« and delete the “old” name step

by step with »« (red).

4 Select the required character/number with

«, »Λ«, »<« or »>« and move to the

» next character with »OK«.

Repeat the same process for all characters/

numbers.

Note:

Using »Shift« ➡ »OK«, you can switch between uppercase letters / numbers and lowercase letters / special characters.

5 To save the new name with »« (green). 6 Select the icon appropriate for the device

type with » confirm

7 To save the setting, press »

– Source name and icon will change.

8 Press »EXIT« to end the setting.

« or »>« and press »OK« to



« (blue).



«.

« (blue).

ENGLISH

PICTURE /SOUND SETTINGS

-----------------------------------------------------------

Picture settings

1 Open the menu with »MENU«.

« or »>«

Tuesday

xx xxx xxxx

BACK EXIT

« or »>«

«, »Λ«,

« or

2 Select menu item »Settings« with »

« or »>« and press »OK« to confirm.

3 Select menu item »Picture« with »

and press »

« to confirm.

– »Picture Settings« menu is active.

Settings > Picture

Picture

3D Settings >

Picture Format 16:9

Picture Mode Natural

Backlight Ec0

Advanced

Restore default display settings

Change Area Select ExitBack

Source TimerSound NetworkTV Parental

4 Select the required line »Picture Format«,

»Picture Mode« or »Backlight« with » »

« and press »OK« to confirm. Select the option with » Press »BACK <« to return to »Picture«

« or »>«.

menu.

Note:

Other settings are available under »Advanced«.

5 Select the line »Advanced« with »

« and press »OK« to confirm.

6 Select the required line/function with »

or »

« and press »OK« to confirm.

Select the value/option with »

and press »OK« to confirm.

Press »BACK <« to return to »Picture«

menu.

7 Press »EXIT« to end the setting.

« or

Advanced picture settings

The “advanced picture settings” are in principal digital image improvements which, however, should be only used when necessary when picture quality and transmission is excellent. They may well improve the display with poor material, but may adversely affect the display where transmission and picture quality are excellent.

»Backlight« – Manual setting for back lighting (only active if dynamic back lighting is switched to “OFF”). This setting also directly impacts power consumption.

»Dynamic Backlight« – Here the device

optimally adjusts the back lighting for the picture content by regulating the back lighting depending on the average picture brightness. If a picture has predominately dark areas, then the black level displayed is improved by downward adjustment of the back lighting (in this case the display of the dark areas is improved), and with predominantly bright picture material the back lighting is maximised in order to display these areas more brightly.

»Vibrant Colour« – Increases the colour contrast and the contrast adjustment. This setting is mostly too strong for use with normal pictures and should only be used where necessary (low or off) otherwise nuances in the image can be suppressed.

»Gamma« – This setting establishes which brightness value should be displayed for which digital transmission value. Most recordings are transmitted with a gamma value of 2.2 (all Windows PCs and newer PCs with a MAC operating system work with this, older MAC systems and transmissions without colour profile mostly operate with a gamma value of 1.8).

»Dynamic Contrast« – The function dynamically and optimally adjusts the contrast for the respective picture content by analysing images and then altering this depending in a change in contrast. This increase the contract, however may also reduce the visible brightness levels in the picture.

ENGLISH

PICTURE /SOUND SETTINGS

»Perfect Clear« – Improves the general image by means of a gentle blue hue (giving the appearance of greater sharpness) and improves the black level by setting this entirely to black from specific shade of back. This reduces the visible grey values in the dark areas of the picture.

»Film mode« detects and processes feature films automatically for all channel sources. This means you will always receive an optimal picture.

This functions in the modi 480i, 576i and

1080i in TV playback and for other channel sources.

If the »Film mode« is switched on for

programmes without a feature film signal, minor problems such as picture freeze, defective subtitles or fine lines in the picture could occur.

»MEMC« – Improves the display of moving images through the additional computation of intermediate pictures and is only available for devices from 32”. It is displayed with a PPR of 400 (Picture Perfection Rate). If the adjustment value is too high, this may result in ghosting with poor transmission due to the incorrect computation of the intermediate pictures.

»Nois Reduction« – Reduces the visible snow by displaying the picture a little less sharply and creating a slight blurring. Should therefore be used minimally with good picture material.

»Block Noise Reduction« – This function can only be selected with digital reception sources and AV presets. It reduces any interference from artefacts (pixel blocks) from digital programmes due to MPEG compression (such as from DVB-T receivers and lower transmission rates or DVD players).

Restore default settings

1 In the menu »Picture« select the line »Restore

default display settings« with » and press »OK« to confirm.

2 Select push button »Yes« with »

confirm the security query; or select push button »No« with »

to cancel the function.

3 Press »EXIT« to end the setting.

Concluding the settings

1 Press »EXIT« to end the setting.

-----------------------------------------------------------

« or »Λ«

« or »>« to

ENGLISH

PICTURE /SOUND SETTINGS

-----------------------------------------------------------

Sound settings

1 Open the menu with »MENU«.

xx xxx xxxx

BACK EXIT

« or »>«.

«, »Λ«,

« or »>«

Tuesday

« or

2 Select menu item »Settings« with »

« or »>« and press »OK« to confirm.

3 Select menu item »Sound« with »

and press »

« to confirm.

– »Sound« menu is active.

Settings > Sound

Picture

Sound Mode User

Night Mode Off

Bluetooth Off

Select Bluetooth Device - - - -

Advanced

Restore Default Sound Settings

Change Area ExitBack

Source TimerSound NetworkTV Parental

Note:

Additional operations are explained in the following sections.

Sound Mode

1 Select the line »Sound Mode« with »V« or

«.

2 Press »

« or »>« to select the desired op-

tion.

DTS Studio Sound™

DTS Studio Sound is an advanced surround sound solution suite that accurately extracts and places audio cues for an immersive surround experience over the TVs built-in speakers. To complete the audio experience, post processing and psychoacoustic techniques are implemented to provide 3D audio rendering to match 3D video content, for bass and dialog enhancement and to deliver consistent and level volume across content.

DTS Studio Sound Technology is supported in Film, Natural, Speech and Music settings.

1 Select the line »Sound Mode« with »

«.

2 Select the option »Movie«, »Natural«,

»Speech« or »Music« with »

Night Mode

Night Mode prevents sound fluctuations and volume increases.

1 Select the line »Advanced« from the Sound

menu with »

« or »Λ« and press »OK« to

confirm.

2 Select the line »Night Mode« with »

«.

« or

3 Activate (»On«) or deactivate the night

mode by pressing »

« or »>«.

Notes:

»Night Mode« appears in menu if »DTS« has been selected in »Sound Mode«.

Other settings are available under »Advanced«. Select the line »Advanced« with »

« or »Λ« and press »OK« to confirm.

Switching bluetooth on / off and registering an external BT device

Bluetooth enables the television‘s audio signal wireless to be sent to a registered BT device (e.g. subwoofer).

The signal transmission is possible from the television set to a Bluetooth-enabled device, only.

1 Switch on the appropriate subwoofer and

start the registration on the subwoofer (see

subwoofer operating manual).

2 Select the line »Bluetooth« with »

« and switch on with »<« or »>« (»On«).

« or

– The subwoofer is being searched for. After

a short time the subwoofer is displayed in the menu.

3 When the subwoofer has been found con-

firm with »OK« . – The name of the subwoofer is displayed in

the »Sound« menu.

For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the Symbol, & DTS and the Symbol together are registered trademarks and DTS Studio Sound is a trademark of DTS, Inc. © DTS, Inc. All Rights Reserved. For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the Symbol, & DTS and the Symbol together are registered trademarks, and DTS 2.0+Digital Out is a

ENGLISH

+ 97 hidden pages