Groen TDH-20 User Manual
TABLE TOP KETTLES
PROJECT NAME:
LOCATION:
ITEM NO:
TILTING GAS MODEL TDH
Kettle shall be a Groen Model TDH (specify 20, 24, 40 or 48 quart) stainless steel, self-contained, steam
jacketed unit operating from a gas heated steam source contained within unit.
AVAILABLE MODELS:
TDH-20 (20 QUART)
TDH-24 (24 QUART)
TDH-40 (40 QUART)
TDH-48 (48 QUART)
CONSTRUCTION: Kettle shall be of Type 304
stainless steel, one-piece welded construction. All
exposed surfaces shall be stainless steel. All controls
shall be contained in a gasketed enclosure. Unit shall
be furnished with a heavy reinforced rim with a welded
in butterfly shaped pouring lip for durability and pouring
control. Right or left hand tilt handle. Faucet bracket is
standard and mounted on rear of electrical control box.
FINISH: Interior of kettle shall be polished to a 180
emery grit finish. Exterior of kettle shall be finished to
a bright high buff finish, ensuring maximum ease in
cleaning and maintaining brilliant appearance.
ASME CODE, CSA & CGA CERTIFIED: Unit
shall be ASME shop inspected, stamped and registered
with the National Board for operation up to a maximum
working pressure of 50 PSI. Unit shall be design certified
by the CSA.
SANITATION: Unit shall be designed and
constructed to meet NSF and known health department
and sanitation codes, and be NSF listed.
SELF-CONTAINED STEAM SOURCE: Kettle
shall have a gas-heated (natural and propane gases CSA
certified; consult factory for butane or butane/propane
mixture), self-contained steam source to provide kettle
temperatures of 150° to approximately 295°. Unit shall
be factory charged with water and rust inhibitors to
ensure long life and minimum maintenance.
CONTROLS: Controls shall include a thermostat,
pressure gauge, gas regulator valve, heating indicator
lamp, on/off switch, front mounted water sight glass
and electronic spark ignition.
SAFETY FEATURES: Kettle shall have safety
tilt cut-off (cuts off heat when tilted to 12° and
above), pressure relief valve, high limit pressure
switch, and low water cut-off. Gas supply shuts off
automatically when unit is tilted. 24V control system.
PERFORMANCE/FEATURES: Patented fin
tube burner assembly delivers efficient combustion.
The 20/24 quart unit shall have 31,000 BTU/hr
firing rate and the 40/48 quart unit shall have a
52,000 BTU/hr firing rate. Electronic spark ignition
is standard. Unit shall be thermostatically controlled
to automatically shut off when desired temperature is
reached and turn on when product temperature drops
below desired setting. Design shall make it possible
for one person to easily tilt kettle, even when kettle
is filled to capacity. Pouring height allows filling of
4” high pans on the table top. Tilt handle is field
reversible for right or left hand tilt.
INSTALLATION: Specify natural, propane,
butane or specific propane/butane mixture. Unit
requires 1/2” NPT gas line connection and 115 volt
electric supply for spark ignition. Remote steam
source is not required.
ORIGIN OF MANUFACTURE: Designed and
manufactured in the United States.
QTY:
MODEL NO:
AIA NO:
SIS NO:
Stainless steel 2/3 steam jacketed
kettle, table top, tilting, self-contained, gas heated 20, 24, 40 and
48-quart capacity.
OPTIONS/ACCESSORIES:
Etch marks, gallons
Etch marks, liters
Correctional package
316 s/s liner
Single pantry faucet
Double pantry faucet
Single pantry pre-rinse
Double pantry pre-rinse
Basket insert
Nylon basket liner
Liner retaining ring
Lift off cover
Cover holder
Cover strainer
Stand
Drain cart
Cart plumbing kit
Table Top Kettles
143944 RevD
Revised 04/12
P/N 146528 REV E
P/N 137835 REV C
TDH
1055 Mendell Davis Drive, Jackson, MS 39272, 888-994-7636, unifiedbrands.net
© 2012 Unified Brands. All Rights Reserved. Unified Brands is a wholly-owned subsidiary of Dover Corporation.
Loading...