Groen NA-3-50SA User Manual
CAPKOLD® COOK-CHILL SYSTEMS
PROJECT NAME:
LOCATION:
ITEM NO:
NON TILT-OUT AGITATOR KETTLE MODEL INA/3
CapKold® hemispheric bottom steam jacketed kettle, 2/3 jacket, with patented inclined agitator, to ensure
gentle yet thorough mixing of a broad range of products and enhanced suspension of ingredient solids during
product transfer. 100 PSI maximum operating jacket pressure, 3” air operated drop down product discharge
valve and variable speed agitator drive standard.
AVAILABLE MODELS:
INA/3-50SA (50 GALLON)
INA/3-100SA (100 GALLON)
INA/3-150SA (150 GALLON)
INA/3-200SA (200 GALLON)
INA/3-300SA (300 GALLON)
CONSTRUCTION:
• Hemispherical bottom jacket is designed for up to
100 PSI working pressure and built to ASME code
and National Board registered. Kettle will operate
dependably at any steam pressure between 15 PSI
and 100 PSI
• Capacities are working output gallons
• Spiral baffle within jacket for more efficient
circulation of cooling water
• Type 316 stainless steel inner hemisphere and all
wetted parts. Type 304 elsewhere
• Interior and exterior of kettle finished to a No. 4
Sanitary Finish
• 3” air operated, drop down, stainless steel, product
transfer valve mounted flush to kettle bottom
• Stainless steel legs with adjustable stainless steel
floor mounting flanges
• 3/4” swing spout faucet mounted at kettle rim
• Manufactured to latest sanitary standards an HACCP
compliant
• NSF listed
AGITATOR DESIGN:
• Inclined, easily removable agitator and breaker bar,
with removable nylon edge scraping blades which
scrape entire heat exchange surface
• Variable speed gear motor drive with 7-36 rpm
operating range
• Heavy duty T.E.F.C. motor
CONTROL SYSTEMS:
• Flush mounted temperature sensor
• Emergency stop switch mounted near kettle rim
• Vacuum breaker and safety valve supplied and
factory mounted
• Kettle-mounted control valve box pre-piped for
single point utility connections
NOTE:
• Recommend 50-75 PSI (min) steam for rapid
cooking
• Larger sizes (Consult factory for specifications)
• Single or dual kettle control panel required to
operate (See Spec CKCP)
ORIGIN OF MANUFACTURE: Designed and
manufactured in the United States.
QTY:
MODEL NO:
AIA NO:
SIS NO:
CKINA3 Kettle W/Non Tilt-Out Inclined
Agitator & Pre-Piped Valve Box
OPTIONS/ACCESSORIES:
Agitator located ±45°, ±90° of
rear centerline
Pinned agitator for heavy, vis-
cous products
Remote control valve boxes
3” manual ball valve with 90º
elbow
Prison package
2 piece hinged cover (1/3 solid,
2/3 open grate)
2 piece solid cover
CapKold Kettles
CKINA3 160399 RevA
Revised 10/13
160400 REV A
INA/3-SA
TEMPERATURE
SENSOR
-90˚ +45˚ +90˚
D
3” AIR
OPERATED DROP
DOWN VALVE
-45˚
OPTIONAL AGITATOR
AND DRIVE ORIENTATIONS
1055 Mendell Davis Drive, Jackson, MS 39272, 888-994-7636, unifiedbrands.net
© 2013 Unified Brands. All Rights Reserved. Unified Brands is a wholly-owned subsidiary of Dover Corporation.
Loading...