FLOOR KETTLES
PROJECT NAME:
LOCATION:
ITEM NO:
TILTING ELECTRIC MODEL DEE/4
Kettle shall be a Groen Model DEE/4 (Specify 20, 40, or 60 gallon) stainless steel steam jacketed unit,
operating with an electric heated steam source contained within unit.
AVAILABLE MODELS:
DEE/4-20 (20 GALLON)
DEE/4-40 (40 GALLON)
DEE/4-60 (60 GALLON)
CONSTRUCTION: Kettle interior shall be of
type 316 stainless steel with solid one-piece welded
construction. The console and all exposed surfaces shall
be stainless steel. The kettle body shall be mounted in
a heavy-duty stainless steel combination kettle support
tilt trunnion, which in turn is supported by the polished
stainless steel enclosed base. The base shall be provided
with stainless steel tubular legs with adjustable bullet
feet. The enclosed support base shall contain a smooth
operating, self-locking tilt mechanism, and shall be of
sanitary, drip-proof construction with interior readily
accessible for installation or maintenance. The unit shall
be furnished with a heavy reinforced bar rim with a
welded-in butterfly shaped pouring lip for pouring control
and durability. All electrical components to be contained
within the kettle and console. Designed for single point
electrical connection.
FINISH: Kettle interior shall be polished to a 180
emery grit finish. Exterior of kettle shall be finished to
a bright high buff finish, ensuring maximum ease in
cleaning and maintaining brilliant appearance.
ASME CODE, UL LISTED: Unit shall be ASME
shop inspected, stamped and registered with the
National Board for operation up to a maximum working
pressure of 50 PSI. Unit shall be UL listed for sale in USA
and Canada. Unit shall be registered in Canada with a
CRN number.
SANITATION: Unit shall be designed and
constructed to meet NSF and known health
department and sanitation codes, and be NSF listed.
DRAWOFF: A 2” tangent drawoff is optional.
(Add “T” to model designation - DEE/4T). If drawoff
is specified, outlet shall be equipped with removable
1/4” perforated stainless steel strainer.
SELF-CONTAINED STEAM SOURCE:
Kettle shall have an electrically heated self-contained
steam source to provide kettle temperatures of 150°F
to approximately 295°F. Unit shall be factory charged
with chemically pure water and rust inhibitors to
ensure long life and minimum maintenance.
CONTROLS: Controls shall include a thermostat,
built-in contactor, safety tilt cut-off, safety valve,
pressure gauge, water sight glass, heat indicator light
and low water cutoff.
PERFORMANCE FEATURES: Unit shall be
thermostatically controlled to automatically shut off
when the desired temperature setting is reached
and turn on when product temperature drops below
setting. Smooth action manual tilt allows for easy
pouring and transfer of kettle contents.
INSTALLATION: Specify 208, 240, or 480 Volt,
single or three phase, 50 or 60 cycle electric service.
ORIGIN OF MANUFACTURE: Designed and
manufactured in the United States.
QTY:
MODEL NO:
AIA NO:
SIS NO:
Stainless Steel 2/3 Steam Jacketed
Kettle, Floor Mounted, Tilting, SelfContained, Electric Heated, 20,40 or
60- Gallon Capacity. Model DEE/4T
shown with optional 2” tangent drawoff.
OPTIONS/ACCESSORIES:
2” tangent draw-off valve with
1/4” perforated disk strainer
Basket inserts (TRI-BC)
Lift-off cover
Hinged cover kit
Pan carrier (40 and 60-gallon)
Kettle brush kit
Double and single pantry
faucets
Lip strainers
1/8” perforated disk strainer
1/4” perforated disk strainer
Solid disk strainer
Contour measuring strips
Gallon etch marks
Single Phase Terminal Block Kit
Floor Kettles
144241 RevG
Revised 10/13
P/N 123003 REV C
DEE/4
1055 Mendell Davis Drive, Jackson, MS 39272, 888-994-7636, unifiedbrands.net
© 2013 Unified Brands. All Rights Reserved. Unified Brands is a wholly-owned subsidiary of Dover Corporation.
Loading...