Groen D-20 User Manual
DIRECT STEAM KETTLE
PROJECT NAME:
LOCATION:
ITEM NO:
PEDESTAL MOUNTED TILTING MODEL D
Kettle shall be a Groen Model D (Specify 20, 40 or 60-gallon) stainless steel, 2/3 steam jacketed unit operating
from a direct steam.
AVAILABLE MODELS:
D-20 (20 GALLON)
D-40 (40 GALLON)
D-60 (60 GALLON)
CONSTRUCTION: Kettle interior shall be of
type 316 stainless steel with, solid one-piece welded
construction. Kettle jacket shall be 304 stainless steel,
solid one piece construction. Unit shall be furnished with
a heavy reinforced bar rim with a heavy-duty, butterflyshaped pouring lip for maximum sanitation, pouring
control, and durability. Kettle body shall be supported
by a stainless steel yoke stand with pedestal base.
Self-locking work gear tilt mechanism and rotary steam
joint are completely enclosed in stainless steel housing,
mounted on the right kettle support arm. Large hand
crank provides easy operator tilting and precise pouring
control. Faucet mounting bracket is standard.
STEAM PRESSURE: Kettle shall operate
dependably at any steam pressure between 5 and 25
PSI. Higher working pressures available.
MOUNTING: Outer circumference of pedestal
base is flanged down vertically to ensure proper
sealing and easy mounting to floor or deck.
INSTALLATION: Remote steam source required.
Steam trap assembly is required and not provided
unless ordered as an option. (See below) See
dimension T on other side for steam inlet size and
number.
ORIGIN OF MANUFACTURE: Designed and
manufactured in the United States.
QTY:
MODEL NO:
AIA NO:
SIS NO:
Stainless steel 2/3 Steam Jacketed
Kettle, Pedestal Mounted, Tilting,
Direct Steam. 40-60 gallon capacities. Model D shown.
FINISH: Kettle interior shall be polished to a 180
emery grit finish. Exterior of kettle shall be finished to
a semi-deluxe buff finish, ensuring maximum ease in
cleaning and maintaining brilliant appearance.
ASME CODE: Unit shall be ASME shop-inspected,
stamped and registered with the National Board for
operation up to a maximum working pressure of 25 PSI.
SANITATION: Unit shall be designed and
constructed to be NSF-listed, meeting NSF and all known
health department and sanitation codes.
OPTIONS/ACCESSORIES:
Basket Inserts
Water fill faucets (single or
double pantry)
Lift off cover
Counterbalanced hinged cover kit
2” or 3” tangent draw-off valve
(20 & 40-gal. only)
Cold water cooling
Steam trap assemblies
Kettle brush kit
1/8” perforated disc strainer
1/4” perforated disk strainer
Solid disc strainer
Lip strainers
Pan carrier (40 and 60-gallon)
Steam regulators
Contour measuring strip
Gallon etch marks
Braising Pans
160170 RevD
Revised 04/12
P/N 5723001REV F
CLEARANCE
STEAM OUTLE
E
SEE NO
D
540
654
483
36-1/4 921 43 109247 1194
635
1054
194325
470 559
914 978
330 432
13 17
23 584 30 762 34 864
36 38-1/2
18-1/222
TABLE OF DIMENSIONS
CAPACITY (GALLONS/LITRES)
762
30
INCHESMM
21-1/4
INCHESMMMMINCHES
25-3/4
508 660
511 603
410 489
20 26
20-1/8 23-3/4
16-1/8 19-1/4
60 GAL./228 LTRS.
20 GAL./76 LTRS. 40 GAL./152 LTRS.
ABCDEFGHJKLMNPQ
(4) HOLES
9/16" DIA.
S
R
19719679
7-3/4
28-1/2
457
16 406381305 1512
18
N/AN/A318292 12-1/211-1/2
16-1/2 419
36814-1/236814-1/2
622 660
270 229
36 38914 965 42 1067
10-5/89
24-1/226
11-1/2 292 12-1/2 318 14-1/2 368
SECTION A-A
FLOOR MOUNTING LAYOUT
406 406
16 16
14-3/4 13-3/4375 349 N/AN/A
S
R
3/4
OF KETTLE
L
C
Q
13 19
3/4 3/4
T
F
1. 2" TANGENT DRAWOFF AND VALVE FURNISHED WHEN SPECIFIED AT EXTRA COST.
2. FOR KETTLES WITH 2" TANGENT DRAWOFF, ADD 5" (20 GAL.) & 7"
NOTES:
E
(40 GAL.) TO DIMENSIONS H, J AND K.
4. PEDESTAL MUST BE SECURELY ANCHORED AND SEALED TO THE FLOOR.
5. IF TANGENT DRAWOFF IS REQD. ON 60 GAL. KETTLE, ORDER MODEL 'DLT' (TRI-LEG KETTLE).
3. APPROX. 5 PSI REQ'D TO PUSH CONDENSATE UP DRAIN TUBE.
OF KETTLE
L
C
(OPTIONAL-
TANGENT DRAWOFF)
4-1/2"
6-1/4"
WALL
WHEN OPEN
P
N
MIN. REAR
CLEARANCE
M
TILTED
FULLY
POSITION
(POUR PATH MIN.)
CB
D
FAUCET MOUNTING BRACKET
IS STANDARD & FURNISHED
ASME APPROVED
SAFETY VALVE
(FAUCET IS OPTIONAL)
'T' NPT
'T' NPT
T
TILT RADIUS
PATH
SELF LOCKING
WORM & GEAR
TILTING MECHANISM
STEAM INLET
F
POUR
J
SEE NOTE 2.
K
SEE NOTE 2.
L
(POUR PATH MAX.)
AA
PETCOCK
A
ID
OF KETTLE
L
C
3"
MIN. SIDE
(BOTH SIDES)
G
JACKET DRAIN
DRAIN TUBE
CONDENSATE
TE 2.
H
1055 Mendell Davis Drive, Jackson, MS 39272, 888-994-7636, unifiedbrands.net
© 2013 Unified Brands. All Rights Reserved. Unified Brands is a wholly-owned subsidiary of Dover Corporation.
Loading...