Greyline Instruments VSJ Data sheet

DETAIL

BAND ADJUSTMENT

JACK

Data Sheet

VSJ Pipe Mounting Bands

for Submersible Sensors

Use optional VSJ stainless steel Pipe Mounting
Bands for easy Sensor installation in round pipes.

Each Pipe Band includes:

!

Band Adjustment Jack allowing ±0.5” (13 mm) adjustment
from the nominal band size.

: VSJ6 and VSJ8 bands do not include adjustment jacks

Note

- they secure to pipe by spring tension.

!

Stainless steel bracket for Sensor mounting

!

Pre-drilled for tie wraps (included) to secure Sensor cable

CODE BAND SIZE

VSJ6 6”/150 mm ID pipes (without adjustment jack)
VSJ8 8”/200 mm ID pipes
VSJ10 10”/250 mm ID pipes
VSJ12 12”/300 mm ID pipes
VSJ14 14”/350 mm ID pipes
VSJ15 15”/375 mm ID pipes
VSJ16 16”/400 mm ID pipes
VSJ18 18”/450 mm ID pipes
VSJ20 20”/500 mm ID pipes
VSJ24 24”/600 mm ID pipes
VSJ30 30”/750 mm ID pipes

(without adjustment jack)

Mounting Instructions:

Install the stainless steel pipe band with the
sensor mounting bracket at the invert (bottom)
of the pipe. Ensure that the sensor bracket is
parallel to the water surface (check with a
level). Mount so the tapered end of the sensor
will point upstream and the sensor cable will
point downstream. Turn the ¼” hex nut
clockwise to expand the bracket and secure to
the pipe wall by friction fit.

Insert the sensor into the mounting bracket and
clip or tie wrap the sensor cable securely to the
stainless steel pipe band.

FASTEN SENSOR
CABLE TO PIPE OR
CHANNEL WITH
METAL CLIPS OR
TIE WRAPS

END VIEW

SENSOR