Area-Velocity Flow Measurement in Open Channels and Pipes
Level-Velocity
Logger
Stingray 2.0
Logs Level and Velocity
for Flow Studies
Includes powerful
Windows software for
Flow analysis and reporting
Portable, Battery-powered
Streamlined Ultrasonic Sensor
Measures Level, Velocity + Temperature
in Open Pipes and Channels
This compact new meter operates on standard alkaline batteries
for extended time periods to data log level, velocity and water
temperature in open channels, partially full sewer pipes and
surcharged pipesa flume or weir. It is designed forwithout
municipal stormwater, combined effluent, raw sewage, irrigation
water and stream flow.
Stingray 2.0 uses a hydrodynamic ultrasonic sensor to accurately
measure both velocity and level in the channel. The submerged
sensor has no moving parts and is resistant to fouling and
corrosion.
RELIABLE MEASUREMENT AND CONTROL
Portable Area-Velocity Meter
Logging
Interval
Log
Duration
Battery
Life
10 sec
15 days
15 days
30 sec
45 days
45 days
1 min
3 months
3 months
2 min
6 months
6 months
5 min
1 year
1 year
10 min
2 years
2 years
15 min
3 years
3 years
30 min
4 years
4 years
60 min
4 years
4 years
Stingray 2.0 measures evel and elocity in open channels or pipes. No calibration is required. The sensorlv
is a completely sealed ultrasonic unit with no orifices or ports. It mounts inside the pipe or at the bottom of a
channel. The watertight electronics enclosure is hung in the manhole or at a convenient location. Sensor,
mounting bracket, batteries, software and cables are included with each Stingray.
Powered by Standard Alkaline
Batteries and Operates up to
Four Years!
With 4 D-cell Alkaline batteries the
Stingray 2.0 will operate up to 4 years!
These low-cost batteries are available in
stores everywhere and with an extremely
low self discharge rate they will reliably
power the energy-efficient Stingray 2.0
for the duration of your flow study.
Stores 130,000 Data Points
Stingray 2.0 stores up to 130,000 data
points including level, velocity and water
temperature. Between readings it
hibernates to conserve energy.
USB Data Download
Connect your laptop orto thePC
Stingray’soutput to view realtimeUSB
level and velocity readings, view
Stingray Installed in a Stream Flow Application
remaining logger and battery capacity and
to set the Stingray 2.0 logging interval.
Greyline Logger Software
Powerful Windows software is included free with each Stingray 2.0. Use it to set the logger interval, to download log files
and view Level, Velocity and water temperature readings in real-time.
Greyline Logger will display log files and flow rates in graph and table formats. It will generate flow reports including
minimum, maximum and average flow, calculate flow totals, and convert between common measurement units.
Reporting is easy with Greyline Logger software - you can export charts as image files and export data to use in
spreadsheet or database programs.
Retrieve a Log file
from Stingray 2.0
+=
'Generate Flow Log'
Click
Greyline Logger
calculates Flow
Calculate flow
with Greyline
Logger software
Stingray 2.0 Specifications
General Specifications
Electronics Enclosure:
Accuracy:
Display:
Operating Temp. (electronics):
Instrument Set-up:
Logger Interval:
Data Logger Capacity:
Power:
Output/Communications:
USB Cable:
Software:
Approximate Shipping Weight:
QZ02SensorL
Velocity Measurement Range:
Level Measurement Range:
Operating Temperature:
Exposed Materials:
Sensor Cable:
Sensor Mounting:
Temperature Compensation:
Options
Sensor Cable Extension:
Sensor Mounting Bands:
Extended Temperature Sensor:
Greyline Stingray 2.0 Level-Velocity Logger
Watertight, airtight, dust proof (67) polycarbonateIP
Level: ±0.25% of Range. Velocity: ±2% of Reading
LCD displays: Level, Velocity, Water Temperature, Battery and Memory capacity
-4° to 140°F (-20° to 60°C)
via Greyline Logger software for Windows: Logging Time Interval, Site Name
10 sec (15 days), 30 sec (45 days), 1 min (3 months), 2 min (6 months), 5 min (1 year),
10 min (2 years), 15 min (3 years), 30 min (4 years) or 60 min (4 years)
130,000 data points
4 Alkaline 'D' cell batteries
USB
31shieldedft ( m)
Greyline Logger for Windows. Supports real-time monitoring, log file download and
export, graph and data table presentation, level/velocity to flow conversion
10 lbs. (4.5 kg)
0.1 to 1ft/sec (0.03 to 3. m/sec)2.58
Minimum Head: 1 in (25.4 mm). Maximum Head: 15 ft. (4.5 m)
5 to 150°F (-15 to 65°C)
PVC, polyurethane, epoxy
25 ft. (7.6 m) submersible polyurethane jacket, shielded, 3-coaxial
includes-stainless steel mounting bracketMB QZ
Automatic, continuous
shielded 50 ft. (15 m) submersible, polyurethane jacket with watertight connectors
Stainless steel sensor mounting bands for pipes from 6” to 72” (150 to 1800 mm)
QZHT CPVC02L-,construction rated to 175°F (80°C)
Dimensions
25 ft / 7.6 m length
QZPS VELOCITY LEVEL SENSOR02L--01-/UT
SIDE VIEW
1mm25
0.50"
12.7 mm
4. "92
0.63"
16 mm
1.50"
38.1 mm
9.12"
232 mm
4.37"
111 mm
7.56"
192 mm
Stingray 2.0
ELECTRONICS ENCLOSURE
New Portable Level-Velocity Logger
for Flow Surveys in Sewers, Streams and Open Channels
Use Stingray 2.0 for:
!
Flow Surveys
!
Inflow & Infiltration
Studies
!
CSO Monitoring
!
Stormwater Runoff
!
Irrigation Water
!
Permit Compliance
!
Wastewater Treatment
Plant Flow Studies
SENSOR
LEVEL
VELOCITY
FLOW
SUBMERGED ULTRASONIC SENSOR
MEASURES LEVEL AND VELOCITY
Easy to Operate
No calibration is required. Just install the sensor at the bottom of the pipe or channel
and the Stingray 2.0 logs level and velocity readings. Use Greyline Logger software
(included) to set the logging interval, and to view
readings in real-time on your laptop or. StingrayPC
2.0's built-indisplay lets operators check levelLCD
and velocity rates, remaining battery life and logger
memory.
Built-in Display for Operator Confidence
Operators can check operation with the built-in LCD
bar graph display. It scrolls through level, velocity
and temperature readings, plus remaining battery
and logger storage capacity. The display turns off
automatically after 60 seconds to conserve battery
power.
How it Works
The sensor transmits ultrasonic pulses that travel through the water and reflect off the
liquid surface. To monitor water level, the Stingray 2.0 precisely measures the time it
takes for echoes to return to the sensor.
Velocity is measured with an ultrasonic signal continuously injected into the flow. This
high frequency sound is reflected back to the sensor from particles or bubbles
suspended in the liquid. If the fluid is in motion, the echoes return at an altered
frequency proportionate to flow velocity. The Stingray 2.0 uses this Doppler frequency
shift to accurately calculate flow velocity.
How to Order
Applications Support
No Risk Appraisal
The Greyline
Guarantee
Canada: 16456 Sixsmith Dr., Long Sault, Ont. K0C 1P0
Contact a Greyline sales representative in your area or phone one of our sales
engineers. Describe your requirements and receive our prompt quotation.
Take advantage of Greyline's applications experience. Phone toll free 1-888-473-9546
for advice on applications, installation or service for Greyline instruments.
The Stingray 2.0Velocity Meter must meet your requirements. Discuss yourLevelapplication with a Greyline representative to arrange a performance test.
Quality of Materials and Workmanship - Each instrument manufactured by Greyline is
warranted against defects in materials and workmanship for a period of one year from
date of purchase. Refer to our limited warranty included with each product.
RELIABLE MEASUREMENT AND CONTROL
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.