Greenlee KNOCKOUTS FOR STAINLESS STEEL Catalog Page

KNOCKOUTS

TRUSTED

SINCE

18 62

KNOCKOUTS FOR STAINLESS STEEL

Slug Splitter® SC and Slug Splitter® Knockout Punches

• Slug Splitter® SC heavy-duty punches are designed to punch up through 10 gauge (3.5 mm) stainless steel

• Unique slug-splitting design and tool steel construction easily punch 10 gauge (3.5 mm) mild steel and stainless steel

• Self-centering punch aligns itself on pilot hole (Slug Splitter

Unique Slug Splitter® SC punch design creases slug as the punch is drawn into the die.

745H-3/4

Slug is split in half as punching operation is completed.

Split slugs fall free from the die and stud.

• No need to draw crosshairs or line up die alignment marks

(Slug Splitter

• Unique punch profile also splits slugs for easier slug removal

• Heavy-duty dies and stainless steel draw studs for longer life

• Excellent abrasion resistance for punching fiberglass and plastic

• Slug Splitter check individual punch for specific capacity

• Patent Pending for Self-centering Slug Splitter

SPECIFICATIONS

Capacity Stainless steel up through 10 gauge (3.5 mm) Application 10-gauge stainless steel, mild steel, fiberglass and plastic enclosures. Hole Sizes Conduit Sizes - hole size is outside diameter of US conduit sizes.

Operation Operate with battery, hydraulic or high leverage ratchet driver only.

SC)

SC punch units consist of: punch, die and draw stud,

Example: 1/2" conduit size actually makes a 7/8" hole. Pg Sizes - European standard pipe sizes. ISO Sizes - International Standards Organization pipe sizes.

SC)

746 Ram shown with 745M-1-1/2

= NEW PRODUCT

= REPLACEMENT PART = ACCESSORY

= BARE TOOL

Slug Splitter® SC and Slug Splitter® Knockout Punches

HOLE SIZE

ACTUAL CAPACITY

CAT. NO UPC NO.

- 12323 0.598 15.2 12 2.5 31117 31126 29451 -

745M-16.2 12324 0.638 16.2 16 12 2.5 04599 04598 29451 -

- 12325 0.732 18.6 12 2.5 31119 31128 29451 -

745M-20.4 12326 0.803 20.4 20 12 2.5 31120 31129 29451 -

745H-1/2 * 29560 1/2” 0.885 22.5 10 3.5 28154 * 28155 29451 -

745M-25.4 12317 1.000 25.4 25 10 3.5 04602 04601 29451 -

745H-3/4 * 12318 3/4" 1.115 28.3 10 3.5 28156 * 28157 29452 -

745H-1-7/32 * 29563 1.210 30.5 10 3.5 36490 * 36489 29452 -

745M-32.5 12327 1.280 32.5 32 10 3.5 04605 04603 29452 -

745H-1 * 12319 1” 1.362 34.6 10 3.5 28158 * 28159 29452 -

- 12328 1.457 37.0 10 3.5 31122 31135 29452 -

745M-40.5 12329 1.595 40.5 40 10 3.5 04608 04607 29452 -

745H-1-1/4 * 12320 1-1/4” 1.701 43.2 10 3.5 28160 * 28161 29452 -

- 12330 1.850 47.0 10 3.5 31123 31131 29452 -

745H-1-1/2 * 12321 1-1/2” 1.951 49.6 10 3.5 28162 * 28163 29452 -

745M-50.8 12331 2.000 50.8 50 10 3.5 04611 04609 29452 -

- 12332 2.125 54.0 10 3.5 31124 31132 29452 -

- 12333 2.362 60.0 10 3.5 31125 31133 29452 -

745H-2 * 12322 2” 2.416 61.5 10 3.5 28165 * 28166 29452 -

745M-64 12334 2.520 64.0 63 10 3.5 04614 04613 29452 -

745H-2-1/2 00618 2-1/2” 2.914 74.0 10 3.5 00622 00626 29452 -

745H-3 00619 3” 3.539 89.9 10 3.5 00623 00627 29452 -

745H-3-1/2 00620 3-1/2” 4.011 102.7 10 3.5 00624 00629 29452 1557SS

745H-4 00621 4” 4.544 115.4 10 3.5 00625 00630 29452 1557SS

CONDUIT SIZE

Ø (INCH) Ø (MM) ISO GA. (MM) PUNCH DIE

*Self-Centering Punch Design

DRAW STUD

SLEEVE