Figure 8: Keypad MENU Flow..................................................................................................................... 45
Figure 9: Web Service ................................................................................................................................. 73
Figure 10: Web GUI - Phonebook->Contacts ............................................................................................. 75
FIRMWARE VERSION 1.0.1.14 GXP2130/GXP2140/GXP2160 USER MANUAL Page 6 of 84
GNU GPL INFORMATION
GXP2130/GXP2140/GXP2160 firmware contains third-party software licensed under the GNU General
Public License (GPL). Grandstream uses software under the specific terms of the GPL. Please see the
GNU General Public License (GPL) for the exact terms and conditions of the license.
Grandstream GNU GPL related source code can be downloaded from Grandstream web site from:
http://www.grandstream.com/support/faq/gnu_gpl.
FIRMWARE VERSION 1.0.1.14 GXP2130/GXP2140/GXP2160 USER MANUAL Page 7 of 84
CHANGE LOG
This section documents significant changes from previous versions of user manuals for
GXP2130/GXP2140/GXP2160. Only major new features or major document updates are listed here. Minor
updates for corrections or editing are not documented here.
FIRMWARE VERSION 1.0.1.14
This is the initial version.
FIRMWARE VERSION 1.0.1.14 GXP2130/GXP2140/GXP2160 USER MANUAL Page 8 of 84
WELCOME
Thank you for purchasing Grandstream GXP2130/GXP2140/GXP2160 Enterprise IP Phone.
GXP2130/GXP2140/GXP2160 is a next generation enterprise grade IP phone. GXP2140/GXP2160
features 4.3 inch TFT Color LCD, 5 programmable context-sensitive soft keys, dual Gigabit network ports,
integrated PoE and Bluetooth, 5-way conference, and Electronic Hook Switch (EHS). GXP2130 supports
2.8 inch TFT Color LCD, 4 programmable context-sensitive soft keys, 4-way conference and EHS with
Plantronics headsets. Also, the series can support up to 3 lines for GXP2130, 4 lines for GXP2140 and 6
lines for GXP2160. The GXP2130/GXP2140/GXP2160 delivers superior HD audio quality, rich and leading
edge telephony features, personalized information and customizable application service, automated
provisioning for easy deployment, advanced security protection for privacy, and broad interoperability with
most 3rd party SIP devices and leading SIP/NGN/IMS platforms. The GXP2130/GXP2160 supports
presence and Busy Lamp Field (BLF) in the Multi-Purpose Keys as well. The GXP2140 is expandable with
one to 4 expansion modules. The GXP2160/GXP2140/GXP2130 is the perfect choice for enterprise users
looking for a high quality, feature rich multi-line executive IP phone with advanced functionalities and
performance.
Caution:
Changes or modifications to this product not expressly approved by Grandstream, or operation of this
product in any way other than as detailed by this User Manual, could void your manufacturer warranty.
Warning:
Please do not use a different power adaptor with the GXP2130/GXP2140/GXP2160 as it may cause
damage to the products and void the manufacturer warranty.
This document is subject to change without notice. The latest electronic version of this user manual is
available for download here:
http://www.grandstream.com/support
Reproduction or transmittal of the entire or any part, in any form or by any means, electronic or print, for
any purpose without the express written permission of Grandstream Networks, Inc. is not permitted.
FIRMWARE VERSION 1.0.1.14 GXP2130/GXP2140/GXP2160 USER MANUAL Page 9 of 84
FIRMWARE VERSION 1.0.1.14 GXP2130/GXP2140/GXP2160 USER MANUAL Page 11 of 84
Telephony Features
Hold, transfer, forward, 5-way conference, call park, call pickup, shared-call-appearance
(SCA)/bridged-line-appearance (BLA), downloadable phonebook (XML, LDAP, up to 2000
items), call waiting, call log (up to 500 records), customization of screen, off-hook auto dial,
auto answer, click-to-dial, flexible dial plan, hot desking, personalized music ringtones and
music on hold, server redundancy and fail-over
Sample Applications
Weather, currency, GMI available for advanced custom application development
User and administrator level passwords, MD5 and MD5-sess based authentication, AES
based secure configuration file, SRTP, TLS, 802.1x media access control
Firmware upgrade via TFTP/HTTP/HTTPS, mass provisioning using TR-069 or encrypted
XML configuration file
Power & Green
Energy Efficiency
Universal power adapter included: Input:100-240V ; Output: +12V, 1.5A ;
Integrated Power-over-Ethernet (802.3af)
Max power consumption 3W (power adapter) or 4.5W (PoE, Class 2)
Physical
Dimension: 193mm (W) x 211mm (L) x 84.5 mm (H);
Unit weight: 0.78kg ; Package weight: 1.3kg
Temperature and
Humidity
32-104℉ / 0~40℃, 10-90% (non- condensing)
Package Content
GXP2130 phone, handset with cord, base stand, universal power supply, network cable,
Quick Start Guide
Compliance
FCC Part15 Class B, EN55022 ClassB, EN61000-3-2, EN61000-3-3, EN55024,
EN60950-1, AS/NZS CISPR22 Class B
4 line keys with up to 4 SIP accounts, 5 programmable context sensitive softkeys,
5 navigation/menu keys, 11 dedicated function keys for : MESSAGE (with LED
indicator), PHONEBOOK, TRANSFER, CONFERENCE, HOLD, HEADSET,
Table 4: GXP2140 TECHNICAL SPECIFICATIONS
FIRMWARE VERSION 1.0.1.14 GXP2130/GXP2140/GXP2160 USER MANUAL Page 12 of 84
MUTE, SEND/REDIAL, SPEAKERPHONE, VOL+, VOL-
Voice Codec
Support for G.729A/B, G.711µ/a-law, G.726, G.722 (wide-band), and in-band and
out-of-band DTMF (in audio, RFC2833, SIP INFO)
Auxiliary Ports
RJ9 headset jack (allowing EHS with Plantronics headsets), USB, extension
module port
Telephony Features
Hold, transfer, forward, 5-way conference, call park, call pickup,
shared-call-appearance (SCA)/bridged-line-appearance (BLA), downloadable
phonebook (XML, LDAP, up to 2000 items), call waiting, call log (up to 500
records), customization of screen, off-hook auto dial, auto answer, click-to-dial,
flexible dial plan, hot desking, personalized music ringtones and music on hold,
server redundancy and fail-over
Sample Applications
Weather, currency, GMI available for advanced custom application development
HD audio
Yes, both on handset and speakerphone
Extension Module
Yes, can power up up to 4 GXP2200EXT modules which features a 128x384
graphic LCD, 20 quick-dial/BLF keys which dual-color LED, 2 navigation keys,
and less than 1.2W power consumption per unit.
User and administrator level passwords, MD5 and MD5-sess based
authentication, AES based secure configuration file, SRTP, TLS, 802.1x media
access control
6 line keys with up to 6 SIP accounts, 24 speed-dial/BLF extension keys with
dual-color LED, 5 programmable context sensitive softkeys, 5 navigation/menu
keys, 11 dedicated function keys for : MESSAGE (with LED indicator),
PHONEBOOK, TRANSFER, CONFERENCE, HOLD, HEADSET, MUTE,
SEND/REDIAL, SPEAKERPHONE, VOL+, VOL-
Voice Codec
Support for G.729A/B, G.711µ/a-law, G.726, G.722 (wide-band), and in-band and
out-of-band DTMF (in audio, RFC2833, SIP INFO)
Auxiliary Ports
RJ9 headset jack (allowing EHS with Plantronics headsets), USB, extension
module port
Telephony Features
Hold, transfer, forward, 5-way conference, call park, call pickup,
shared-call-appearance (SCA)/bridged-line-appearance (BLA), downloadable
phonebook (XML, LDAP, up to 2000 items), call waiting, call log (up to 500
records), customization of screen, off-hook auto dial, auto answer, click-to-dial,
flexible dial plan, hot desking, personalized music ringtones and music on hold,
server redundancy and fail-over
Sample Applications
Weather, currency, GMI available for advanced custom application development
User and administrator level passwords, MD5 and MD5-sess based
authentication, AES based secure configuration file, SRTP, TLS, 802.1x media
access control
To set up the GXP2130/GXP2140/GXP2160, follow the steps below:
1. Attach the phone stand or wall mount to the back of the phone where there are slots;
2. Connect the handset and main phone case with the phone cord;
3. Connect the LAN port of the phone to the RJ45 socket of a hub/switch or a router (LAN side of the
router) using the Ethernet cable;
4. Connect the 12V DC output plug to the power jack on the phone; plug the power adapter into an
electrical outlet. If PoE switch is used in step 3, this step could be skipped;
5. The LCD will display provisioning or firmware upgrade information. Before continuing, please wait for
the date/time display to show up;
FIRMWARE VERSION 1.0.1.14 GXP2130/GXP2140/GXP2160 USER MANUAL Page 16 of 84
6. Using the keypad configuration menu or phone's embedded web server (Web GUI) by entering the IP
GXP2200EXT Main Case
Yes (1)
GXP2200EXT Stand
Yes (1)
RJ11-RJ11 Cable
Yes (1)
Connector Plate
Yes (1)
Screws
Yes (4)
Quick Installation Guide
Yes (1)
address in web browser, you can further configure the phone.
GXP2200EXT MODULE
The GXP2140 is expandable with GXP2200EXT modules. GXP2140 supports up to 4 extension modules,
adding 160 fully programmable phone extensions to the phone.
GXP2200EXT board package contains:
Table 8: GXP2200EXT Packaging
Note:
The GXP2200EXT board is an additional accessory for the GXP2140 and is not included in the GXP2140
box.
To set up the GXP2200EXT board with the GXP2140, please follow the steps below:
1. On the back of the GXP2140 and the GXP2200EXT, there are slots for connector plate. Attach the
connector plate between the slots for GXP2140 and the GXP2200EXT;
2. Apply the screws provided and securely tighten them in (See Figure 1: GXP2140 Back View with
GXP2200EXT ).
3. Connect the GXP2200EXT board to the GXP2140 via EXT port using the RJ11-RJ11 cable provided;
4. Install the phone stand on the GXP2140 and the GXP2200EXT board;
5. Power up the GXP2140. The GXP2200EXT board will show the booting up screen with version
information and connecting status;
FIRMWARE VERSION 1.0.1.14 GXP2130/GXP2140/GXP2160 USER MANUAL Page 17 of 84
6. After successfully booting up, the GXP2200EXT board will stay in idle. Press and hold the Left button
for 3 to 5 seconds to check the version information and status.
Figure 1: GXP2140 Back View with GXP2200EXT
The GXP2200EXT board can be configured via the web GUI of the GXP2140 connected. After
successfully configured, press Left or Right button on the GXP2200EXT board and users could browse all
the MPK's status in different pages.
For more information on installing, connecting and configuring the GXP2200EXT board with GXP2140,
please refer to the GXP2200EXT board user manual:
http://www.grandstream.com/support
SAFETY COMPLIANCES
The GXP2130/GXP2140/GXP2160 phone complies with FCC/CE and various safety standards. The
GXP2130/GXP2140/GXP2160 power adapter is compliant with the UL standard. Use the universal power
adapter provided with the GXP2130/GXP2140/GXP2160 package only. The manufacturer’s warranty does
not cover damages to the phone caused by unsupported power adapters.
WARRANTY
If the GXP2130/GXP2140/GXP2160 phone was purchased from a reseller, please contact the company
where the phone was purchased for replacement, repair or refund. If the phone was purchased directly
from Grandstream, contact the Grandstream Support for a RMA (Return Materials Authorization) number
FIRMWARE VERSION 1.0.1.14 GXP2130/GXP2140/GXP2160 USER MANUAL Page 18 of 84
before the product is returned. Grandstream reserves the right to remedy warranty policy without prior
notification.
Warning:
Use the power adapter provided with the phone. Do not use a different power adapter as this may damage
the phone. This type of damage is not covered under warranty.
FIRMWARE VERSION 1.0.1.14 GXP2130/GXP2140/GXP2160 USER MANUAL Page 19 of 84
GETTING TO KNOW GXP2130/GXP2140/GXP2160
IDLE SCREEN
GXP2130/GXP2140/GXP2160 screen displays differently depending on whether the phone is idle or in
use (active). The following figures show the idle screen of GXP2130/GXP2140/GXP2160.
Figure 2: GXP2130 Idle Screen
Figure 3: GXP2140 Idle Screen
FIRMWARE VERSION 1.0.1.14 GXP2130/GXP2140/GXP2160 USER MANUAL Page 20 of 84
DATE AND TIME
Displays the current date and time. It can be synchronized with
Internet time servers.
NETWORK ICON
Shows the status of network. It will indicate whether the network is
down or starting.
STATUS ICON
Shows the status of the phone for registration status, call features and
etc, using icons as shown in the next table.
LINE STATUS INDICATOR
Displays the name of the account that is in use.
SOFTKEYS in Idle Screen
The softkeys are context sensitive and will change depending on the
status of the phone. Typical functions assigned to softkeys are:
SwitchSCR/NEXTSCR
Toggles between different idle screens. For example, for
GXP2130/GXP2140/GXP2160, pressing most left soft key (switch
screen) will toggle among default idle screen, weather
information, currency information and Grandstream Upcoming
Events;
ForwardAll
Unconditionally forwards the phone line (account 1) to another
Figure 4: GXP2160 Idle Screen
The following table describes the items displayed on the GXP2130/GXP2140/GXP2160 idle screen.
Table 9: LCD DISPLAY DEFINITIONS
FIRMWARE VERSION 1.0.1.14 GXP2130/GXP2140/GXP2160 USER MANUAL Page 21 of 84
phone.
MissedCalls
Shows up unanswered calls to this phone.
Redial
Redials the last dialed number when there is existed dialed call
log.
Note:
If XML application is used for GXP2130/GXP2140/GXP2160, the
softkey for XML application will show up in the default idle screen as
configured.
SOFTKEYS in Call Screen
The softkeys are context sensitive and will change depending on the
call status of the phone. Here are the main softkeys in call screen.
Redial
Redials the last dialed number after off hook when there is existed
call log.
Dial
Dials the call out after off hook and entering the number.
AnswerCall
Answers the incoming call when the phone is ringing.
RejectCall
Rejects the incoming call when the phone is ringing.
EndCall
Ends the active call.
Transfer
Transfer softkey will show up after pressing TRAN button and
entering transfer target number. Press Transfer softkey to do blind
transfer.
Split
In auto-attended transfer mode, after establishing the second call,
FIRMWARE VERSION 1.0.1.14 GXP2130/GXP2140/GXP2160 USER MANUAL Page 22 of 84
press Split to quit transfer and go back to normal talking status.
ConfCall
Conferences the active calls.
ReConf
Re-establish the conference among the calls on hold.
SPECIAL SOFTKEYS
(Only for
GXP2130/GXP2140/GXP2160
when integrated with
UCM61xx)
Call Parking: Please refer to UCM61xx Online User Manual for more
information.
CallPark
When the phone dials out, the Call Park softkey will display on
screen. To park the call, press the "CallPark" softkey and select a
green MPK to park the call on available parking lot.
Network Status.
OFF - Network connection is up
ON - Network connection is down
DND Status.
OFF - Do Not Disturb disabled
ON - Do Not Disturb enabled
Call Forward All Status.
OFF - Call Forward All feature disabled
ON - Call Forward All feature enabled
Call Forward Busy Status.
OFF - Call Forward Busy feature disabled
ON - Call Forward Busy feature enabled
Call Forward No Answer Status.
OFF - Call Forward No Answer feature disabled
ON - Call Forward No Answer feature enabled
Call Forward Busy and Call Forward No Answer Status.
Table 10: GXP2130/GXP2140/GXP2160 LCD ICONS
FIRMWARE VERSION 1.0.1.14 GXP2130/GXP2140/GXP2160 USER MANUAL Page 23 of 84
OFF - Call Forward All and Call Forward No Answer feature disabled
ON - Call Forward All and Call Forward No Answer feature enabled
Missed Call Status.
OFF - No missed call
ON - New missed call
Handset Status.
OFF - Handset is not in use
ON - Handset is in use
Headset Status.
OFF - Headset is not in use
ON - Headset is in use
Microphone MUTE Status.
OFF - No muted
ON - Muted
Bluetooth Status. (GX2140/GXP2160)
OFF - Bluetooth is off
ON - Bluetooth is on
USB Status. (GX2140/GXP2160)
OFF - No USB connection
ON - USB connected
Incoming Call.
The current call is an incoming call
Outgoing Call.
The current call is an outgoing call
Call On Hold.
OFF - No call on hold
ON – Call on hold
Call Connect.
OFF - No call
FIRMWARE VERSION 1.0.1.14 GXP2130/GXP2140/GXP2160 USER MANUAL Page 24 of 84
ON - Call connected
Call Conference.
OFF - No Conference call
ON - Conference call is established
Click Hand
In call screen, this icon shows on the line available for transfer or
conference.
IP Call Status
The current call is an IP call.
SIP Call
Enter number for initiate call. The current call is a SIP call.
Call Time
During an active call, this icon shows the call time.
LCD Brightness Up
Brightness is increasing
LCD Brightness Down
Brightness is decreasing
Speaker Volume Up
Call screen icon. Speaker volume is increasing
Speaker Volume Down
Call screen icon. Speaker volume is decreasing
Handset Volume Up
Call screen icon. Handset volume is increasing
Handset Volume Down
Call screen icon. Handset volume is decreasing
Ringtone Volume Down
Call screen icon. The volume of ringtone is decreasing
Ringtone Volume Up
Call screen icon. The volume of ringtone is increasing
FIRMWARE VERSION 1.0.1.14 GXP2130/GXP2140/GXP2160 USER MANUAL Page 25 of 84
Ringtone Volume Up
Call screen icon. The volume of ringtone is increasing
Ringtone Volume Down
Call screen icon. The volume of ringtone is decreasing
VOC status
Call screen icon.
OFF - VOC is off.
ON - VOC is on.
USING THE KEYPAD
FIRMWARE VERSION 1.0.1.14 GXP2130/GXP2140/GXP2160 USER MANUAL Page 26 of 84
Figure 5: GXP2130 Keyboard
Loading...
+ 58 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.