Grandstream GWN7605 quick start Guide

Grandstream Networks, Inc.

126 Brookline Ave, 3rd Floor

Boston, MA 02215. USA
Tel : [phone] - 9300
Fax: [phone] - 1987

www.grandstream.com

In all EU member states, operation of 5150

- 5350 MHz is restricted to indoor use only.

GWN7605

Enterprise 802.11ac Wave-2 2x2:2

Wi-Fi Access Point

For Warranty and RMA information, please visit www.grandstream.com

Quick Installation Guide

Content

English.................................................................................1

简体中文............................................................................7

Español..............................................................................13

Français..............................................................................19

Deutsch..............................................................................25

Italiano...............................................................................31

Polski................................................................................   37

Português..........................................................................  43

Русскй...............................................................................49

OVERVIEW

EN

The GWN7605 is an a󰀨ordable 802.11ac Wave-2 Wi-Fi access point ide­al for small to medium wireless network deployments with medium user
density. It o󰀨ers dual-band 2x2:2 MU-MIMO with beam-forming technol­ogy and a sophisticated antenna design for maximum network through­put and expanded Wi-Fi coverage range. To ensure easy installation and

management, the GWN7605 uses a controller-less distributed network
management design in which the controller is embedded within the prod­uct’s web user interface. The GWN7605 is also supported by GWN.Cloud

and GWN Manager, Grandstream’s cloud and on-premise Wi-Fi manage­ment platforms. It is the ideal Wi-Fi AP for voice-over-Wi-Fi deployments

and o󰀨ers a seamless connection with Grandstream’s Wi-Fi-capable IP

phones. With support for advanced QoS, low-latency real-time applica­tions, mesh networks, captive portals, 100+ concurrent clients per AP

and dual Gigabit network ports with PoE/PoE+, the GWN7605 is scalable

Wi-Fi solution for deployments such as retail locations, restaurants, small

o󰀩ces and more.

PRECAUTIONS

• Do not attempt to open, disassemble, or modify the device.

• Do not expose this device to temperatures outside range of 0 °C to 40 °C for

operating and -10 °C to 60 °C for storage.

• Do not expose the GWN7605 to environments outside of the following humid­ity range: 10-90% RH (non-condensing).

• Do not power cycle your GWN7605 during system boot up or rmware up-

grade. You may corrupt rmware images and cause the unit to malfunction.

PACKAGE CONTENTS

3x M3 NUT

1 x Quick Installation Guide

GWN7605 PORTS

Port Description

NET/POE Ethernet RJ45 port (10/100/1000Mbps) supporting

PoE/PoE+.

NET Ethernet RJ45 port (10/100/1000Mbps) to your rout-

er or another GWN76xx.

RESET Factory reset button.

Press for 7 seconds to reset factory default settings.

POWERING AND CONNECTING THE GWN7605

GWN7605 can be powered on using PoE/PoE+ switch using following

steps:

Step 1: Plug a RJ45 Ethernet cable into the network port of GWN7605.
Step 2: Plug the other end into the uplink port of the power over Ethernet

(PoE/PoE+) switch.

1x GWN7605

Access Point

3x Screw

(PM 3 x 50)

1x Mounting

Bracket

3x Screw

(PA 3.5 x 20)

~1~

1x Ceiling

Mounting Bracket

3x Plastic

Expansion Bolt

RJ45 Ethernet Cable

to power over Ethernet

(PoE/PoE+) Switch

Network Port

HARDWARE INSTALLATION

GWN7605 can be mounted on the wall or ceiling, Please refer to the

following steps for the appropriate installation.

~2~

Wall Mount

1. Position the mounting bracket at the desired location on the wall with

the arrow pointing up.

2. Use a pencil to mark the four mounting holes (screw holes DIA

5.5mm, reticle hole DIA 25mm).

3. If your Ethernet cable feeds through the wall, then cut or drill a circle

approximately 18mm in diameter.

4. Insert screw anchors into the 5.5mm holes. Attach the mounting

bracket to the wall by inserting the screws into the anchors.

Wall

PA3.5x20
Screw

1

5. Connect the ethernet cable (RJ45) to the correct ports of your

GWN7605.

6. Align the arrow on the GWN7605 AP with the arrow on the locking tab

of the mounting bracket and ensure that your GWN is rmly seated
on the mounting bracket.

7. Turn the GWN clockwise until it locks into place and ts the locking

tab.

2

Plastic Expan­sion Bolt

3

Ceiling Mount

Note: Ceiling mounting is recommended for optimal coverage perfor-
mance.

1. Remove the ceiling tile.

2. Place the ceiling backing plate in the center of the ceiling tile and
mark the mounting screw holes (screw holes DIA 5.5mm, reticle
hole DIA 25mm).

3. Insert the screws through the mounting bracket.

Ceiling

Mounting

M3 nut

3

1

2

M3.0x50 screw

4. Connect th Ethernet cable (RJ45) to the correct ports of your
GWN7605.

5. Align the arrow on the GWN7605 with the arrow on the locking tab of

the mounting bracket and ensure that your GWN is rmly seated on
the mounting bracket and connect the network and power cables.

6. Turn the GWN clockwise until it locks into place and ts the locking
tab.

4

6

4

5

6

~3~

5

~4~

CONNECT TO GWN7605 DEFAULT Wi-Fi NETWORK

This device has not been authorized as required by
the rules of the Federal Communications Commission.
This device is not, and may not be,
offered for sale or lease, or sold or leased,
until authorization is obtained.

GWN7605

48V 0.5A GigE POE

WiFi

GWN7605 can be used as standalone access point out of box, or after
factory reset with Wi-Fi enabled by default.

After powering the GWN7605 and connecting it to the network, GWN7605

will broadcast a default SSID based on its MAC address GWN[MAC’s
last 6 digits] and a random password.

Note: GWN7605’s default SSID and password information are printed

on the MAC tag of the unit.

3. The tool will discover all GWN76XX Access Points connected on

the network showing their MAC and IP addresses.

4. Click on Manage Device to be redirected directly to the GWN7605’s
conguration interface, or type in manually the displayed IP address
on your browser.

Enter username and password to login. (The default administrator user-

name is “admin” and the default random password can be found at the

sticker on the GWN7605).

ACCESSING THE CONFIGURATION INTERFACE

A computer connected to the GWN7605’s SSID, or to the same network

as the GWN7605 can discover and access its conguration interface us­ing one of the below methods:

Method 1: Discover GWN7605 using its MAC Address

1. Locate the MAC address on the MAC tag of the unit, which is on the
underside of the device, or on the package.

2. From a computer connected to same network as the GWN7605, type
in following address using GWN7605’s MAC address on your brows­er: https://gwn_<mac>.local

Example: If a GWN7605 has the MAC address C0:74:AD:8B:4E:28, this
unit can be accessed by typing https://gwn_c074ad8b4e28.local on the
browser.

Method 2: Discover GWN7605 using GWN Discovery Tool

1. Download and install GWN Discovery Tool from the following link:

http://www.grandstream.com/tools/GWNDiscoveryTool.zip

2. Open the GWN DiscoveryTool, and click on Scan.

~5~

Notes:

● Make sure that the GWN7605 is not already paired with another
GWN76xx Access Point as slave, GWN7000 Router Series or GWN.

Cloud, otherwise the conguration interface cannot be accessed

● If the GWN7605 is already paired, make sure to unpair it rst, or do
a factory reset.

● It is customer’s responsibility to ensure compliance with local regula-

tions for frequency bands, transmit power and others.

● To manage GWN7605 over cloud, please refer to https://www.gwn.

cloud.

The GNU GPL license terms are incorporated into the device rmware and can
be accessed via the Web user interface of the device at my_device_ip/gpl_li-

cense. It can also be accessed here:

http://www.grandstream.com/legal/open-source-software

To obtain a CD with GPL source code information please submit a written re-

quest to [e-mail]

Refer to online documents and FAQ for more detailed information:

http://www.grandstream.com/our-products

~6~

ZH

概述

GWN7605是一款高性价比802.11ac Wave-2 Wi-Fi接入点, 非常适合中密度
用户的中小型无线网络部署。它具有双频，2x2:2 MU-MIMO波束成形技
术和先进的天线设计，可最大程度地提高网络吞吐量并扩展Wi-Fi覆盖范
围。为了安装和管理更便捷，GWN7605使用无控制器的分布式网络管理
设计，内嵌AC控制器（嵌入Web用户界面中）。同时也支持免费云管理
平台GWN.Cloud，以及本地Wi-Fi管理平台GWN Manager。GWN7605是
Wi-Fi语音部署的理想AP，并且可以与Grandstream的具有Wi-Fi功能的IP电
话无缝连接。 GWN7605支持高级QoS，低延迟实时应用，Mesh网络，自
定义门户，100+并发客户端，集成PoE/PoE+双千兆网络端口，是高扩展
度的Wi-Fi解决方案，可用于零售店，餐厅，小型办公室等部署。

注意事项

• 不要尝试打开，拆解或修改设备。

• 不要将本设备暴露在温度 0℃至40℃的工作环境或 -10℃至 60℃的储存

环境以外。

• 不要将本设备暴露在环境湿度如下范围以外：10-90％RH （无冷凝）。

ZH

3x M3螺帽

GWN7605 端口

端口 描述

NET/POE

NET

RESET

1 x 快速安装手册

以太网RJ45端口（10/100 /1000Mbps），需要
支持PoE/PoE+ 。

以太网RJ45端口（10/100 /1000Mbps），连接
至路由器或另一个GWN76xx。

恢复出厂设置按钮。
按7秒恢复出厂默认设置。

• 系统启动或固件升级期间不要中断电源。这可能会损坏设备固件，并

导致设备故障。

包装内容

1x GWN7605 无线热点

3x 螺丝 (PM 3×50）

1x 安装支架

3 x 螺丝 (PA 3.5×20）

1x 天花板安装支架

3x 塑料膨胀螺栓

~7~

上电和连接GWN7605

GWN7605可以使用PoE或PoE+的通过以下步骤来供电：

第1步：将RJ45以太网电缆插入GWN7605的网络端口。

第2步：将RJ45以太网电缆的另一端插入有PoE/PoE+供电的交换机口。

RJ45电缆连接到以太网
供电的（PoE/PoE+）交
换机或者PoE/PoE+供电
转换头。

网络端口

硬件安装

GWN7605可安装在墙壁或天花板上，请参阅下列步骤进行适当的安装。

~8~

壁挂式安装

1. 将安装支架放置在所需安装的位置并箭头朝上。

2. 用铅笔标出四个安装孔（螺丝孔直径5.5mm的十字线孔直径
25mm）。

3. 在墙上裁剪或者钻一个直径约为18mm的圆孔，以便网线从墙体穿
过。

4. 将膨胀螺栓放入5.5毫米的孔。通过将螺丝拧入螺栓把安装支架固
定在墙上。

墙壁

顶式安装

备注: 推荐将设备安装在天花板上以确保信号的最优覆盖性能

1. 拆下吊顶板。

2. 将吊顶板放在天花板的中央并标记安装螺丝孔（螺丝孔直径5.5mm的十
字线孔直径25毫米）。

3. 将螺钉放入安装托架。

4. 将以太网电缆的RJ45端口插入GWN7605的网络端口中.

天花板安装支架 M3螺帽

3

螺丝
(PA 3.5x20)

1

塑料膨胀螺栓

2

5. 将以太网电缆的RJ45端口插入GWN7605的网络端口中。

6. 将在GWN7605AP的箭头与安装支架的锁定选项卡上的箭头，并确保
您的周报牢固就位安装支架。

7. 将GWN7605顺时针旋转直至其锁定到位。

3

4

5

6

~9~

1

5. 将在GWN7605AP的箭头与安装支架的锁定选项卡上的箭头对齐。确保
您的GWN牢固地安装在支架上并连接上了网络和电源线。

6. 将GWN7605顺时针旋转直至其锁定到位。

2

螺丝
(PM 3×50）

4

6

5

~10~

连接到GWN7605默认的无线网络

This device has not been authorized as required by
the rules of the Federal Communications Commission.
This device is not, and may not be,
offered for sale or lease, or sold or leased,
until authorization is obtained.

GWN7605

48V 0.5A GigE POE

WiFi

新的GWN7605会有默认的Wi-Fi广播。
将GWN7605上电起机并连接至网络，GWN7605会广播默认的SSID。该
SSID是基于设备的MAC地址后六位： GWN[MAC后六位]，并且使用随
机的密码。

3. 这个软件将帮助你发现局域网下所有的GWN7605并显示他们
MAC地址和IP地址。

4. 点击Manage Device（管理设备）后，你将被引导到GWN7605的配
置界面。或者也可以通过在浏览器中输入所查找到GWN7605的IP
地址。

注意：GWN7605的默认SSID和随机密码打印在设备的MAC地址贴纸上。

访问配置界面
将电脑连接到GWN7605广播的无线网，或GWN7605所在的局域网。就可

以用以下的几种方式来发现并访问GWN7605的配置页面：

方法1：用MAC地址来发现GWN7605。

1. 在设备的背面的贴纸上，或者设备的外包装盒上可以找到设备的
MAC地址。

2. 在连接到GWN7605广播的无线网，或GWN7605所在的局域网的电脑
上，用浏览器输入网址：https://gwn_<mac>.local

比如：如果GWN7605的MAC地址为C0:74:AD:8B:4E:28，那么则输入
https://gwn_c074ad8b4e28.local

方法2：用GWNDiscoveryTool发现GWN7605。

1. 从下面的连接下载GWNDiscoveryTool: http://www.grandstream.com/

tools/GWNDiscoveryTool.zip

2. 打开GWNDiscoveryTool，并点击Scan（扫描）。

输入管理员用户名和密码登入管理界面（管理员用 户名的缺省值为:
admin； 缺省密码为随机值，写 于GWN7605机体的贴纸上）

备注:

• 确认GWN7605并没有被配对到另一个GWN7605或者GWN7000系列路由

器，否则配置界面将会是关闭的。

• 如果GWN7605已经被配对，请从它的配主那里接触配对，或者恢复该

设备的出厂设置。

• 遵守当地关于频带、发射功率及其他相关法规是每个用户的责任。

• 请在https://www.gwn.cloud.进行GWN7605的云端管理 。

GNU GPL许可条款已包含在设备固件中，可以通过设 备的Web用户界
面 my_device_ip/gpl_license 进行访问。 也可以通过以下链接访问：http://
www.grandstream.com/legal/open-source-software 如果需要包含GPL源代码
信息的CD，请发邮件到 [e-mail] 提交请求 。

欲获取详细的话机使用信息，请在以下链接中下载GWN7605用户手册。

http://www.grandstream.com/support

~11~

~12~

RESUMEN

ES

El GWN7605 es un AP Wi-Fi 802.11ac con tecnología Wave-2 asequible
e ideal para implementaciones de redes inalámbricas pequeñas a medi­anas com una densidad de usuarios media. Ofrece tecnología MU-MIMO
2×2:2 de doble banda y un sosticado diseño de antena para máximo
rendimiento de la red y cobertura wi expandida. Para garantizar la fa­cilidad de su instalación y manejo, el GWN7605 emplea un diseño de
gestión de redes distribuidas sin controladores en donde el controlador
está integrado en la interfaz de usuario web del producto. El GWN7605
también es compatible con las plataformas de administracion WI-FI en la
nube GWN.Cloud y local GWN Manager. Es el punto de acceso wi ideal
para implementaciones de voz a través de wi y ofrece una conexión
ininterrumpida con los teléfonos IP de Grandstream que cuentan con
conexión wi. Con soporte para QoS avanzado, aplicaciones en tiempo
real de baja latencia, redes malladas, portales cautivos, más de 100 cli­entes simultáneos por punto de acceso y dos puertos de red Gigabit con
PoE/PoE+, El GWN7605 es ideal para una solución Wi-Fi escalable para

implementaciones en distintos escenarios como tiendas, restaurantes,

pequeñas ocinas y más.

PRECAUCIONES

• No intente abrir, desarmar o modicar el dispositivo.

• No exponga este dispositivo a temperaturas fuera del rango de 0 °C a 40 °C

en funcionamiento y desde -10 °C a 60 °C cuando se encuentre almacenado

• No exponga el GWN7605 a entornos fuera del siguiente rango de humedad:
10-90% RH (sin condensación).

• No apague su GWN7605 durante el reinicio del sistema o actualización de
Firmware. Puede corromper la imagen del rmware y causar un mal funcio-

namiento de la unidad.

CONTENIDO DEL PAQUETE

1x Punto de Acceso
GWN7605

3x Tornillos
(PM 3x50)

1x Soporte
de Montaje

3x Tornillos
(PA 3.5X20)

1x Soporte para

montaje en techo

3x Pernos de
expansión de plástico

~13~

3x M3 NUT

1x Guía de instalación Rápida

PUERTOS GWN7605

Puerto Descripción

NET/POE Puerto Ethernet RJ45 (10/100/1000Mbps) con so-

porte de PoE/PoE+.

NET Puerto Ethernet RJ45 (10/100/1000Mbps) para su

router u otro GWN76xx.

RESET Botón de reinicio de fábrica.

Presione por 7 segundos para llevar a los ajustes

de fábrica.

ENCENDIENDO Y CONECTANDO EL GWN7605

El GWN puede ser alimentado usando un switch PoE/PoE+ por medio

de los siguientes pasos:

Paso 1: Conecte un cable Ethernet RJ45 en el puerto de red del

GWN7605.

Paso 2: Conecte el otro extremo del cable en el puerto del switch
(PoE/PoE+).

Cable de Red RJ45
para Switch (PoE/

PoE+)

Puerto de Red

INSTALACIÓN DE HARDWARE

El GWN7605 puede ser montado en la pared o techo, por favor con­sulte los siguientes pasos para la instalación apropiada.

~14~